Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹81.3 L
EMD Value
₹1.6 L
Closing Date
25 Feb 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
University of Agricultural Sciences Bengaluru
Krishnamurthy. D
Extension of Dining Hall for Girls Hostel at GKVK campus
UASBNG/2024-25/OW/WORK_INDENT56
UASBNG/2024-25/OW/WORK_INDENT56
Open
Other Works
Two Tender Document System(Two Cover)
Vice Chancellor Office Bengaluru
5 documents required · 5 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should have Satisfactory completed as a prime Contractor, at least one similar work to an extent of 50% (Rs. 40.00 Lakhs.) of the cost of the work in the last five years
Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work. 1. Earth work-165.00 Cum, 2.Anti Termite Treatment-110.00 Sqm, 3. PCC-35.00 Cum, 4. RCC-70.00 Cum, 5. TMT steel-8.00 Tonne, 6. SSM-25.00 Cum, 7. Solid concrete block-100.00 Sqm, 8. MS grill-550.00 Kg, 9. UPVC windows/ventilator-50.00 Sqm, 10. PU based Water proof Treatment-115.00 Sqm, 11. Granite flooring-300.00 Sqm, 12. Plastering-750.00 Sqm, 13. Painting-600.00 Sqm
The Tenderer or his identified sub-contractor should possess valid license for executing Water Supply / Sanitary Engineering works and should have executed similar Water Supply/Sanitary Engineering Works for Rs.5.97 lakhs
Site visit certificate
Equipment Capacity: Each tenderer should further demonstrate availability of following key and critical equipment:1. Concrete Mixers- 2 Nos, 2. Vibrators-2 Nos, 3. Lorry/Tipper-2 Nos, 4. Centering materials-600.00 Sqm
The Tenderer or his identified sub-contractor should posses required valid electrical license for executing building electrification works and should have executed similar electrical works for Rs.1.73 lakhs
GST paid details and IT returns copies for the previous 5 years
The statement as per section-3 (1.5A) of KW3 existing commitments and on going works.
The statement as per section-3 (1.5B) of KW3 works for which tenders already submitted
Assessed available tender capacity AxNx2.5-B as per clause 3.6 Section 2-ITT of Conditions of contract
Liquid Assets and / or availability of credit facilities of not less than Rs.27.00 lakhs (Credit lines /letter of Credit /Certificates from banks for meeting the fund requirement, etc
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 19-20, 20-21, 21-22, 22-23 & 23-24 achieved in at least two financial years an average annual financial turn over of Rs.162.00 Lakhs
₹2,040
₹1.6 L
15 Feb 2025
15 Feb 2025
27 Feb 2025
25 Feb 2025
Extension of Dining Hall for Girls Hostel at GKVK campus
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such similar works in all kinds of soils, as per dra...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
do: c) Plinth Beam
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
do: c) Roof Beam & lintel
do: d) Roof Slab
Providing Size Stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...
Polyurethane based Single Component for New Surface: Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanized iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe wit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
do: b) Pipes of SN 4, 110mm dia.
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Supplying and fixing of granite table of 1800mmLx760mmBx800mmH. The table top is of 19mm thick Jet Black granite with neatly polished all the edges are full round polish. Table is made out of frame 30...
Supplying of SS stools of 14” dia. and SS Plate at top with height 22”. The stool frames manufactured using 1” dia. (4 legs) MS pipes, the pipes should be powder coated. The above should be carr...
Electrical Works: Concealed Conduit System: Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and ...
do: b) 25 mm dia 2 mm thick
do: c)32 mm dia 2 mm thick
Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...
do: b) 25 mm dia 2 mm thick
do: c) 32 mm dia 2 mm thick
Supplying and fixing PVC/metal conduit Deep junction box. a)19/20 mm deep Junction box
b)25 mm deep Junction box
c)32 mm deep Junction box
Supplying And Fixing Metal Fan Box with Round Hook.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
do: b) Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch
c) Long point above 6Mtr upto 10Mtr from tapping point to out let via switch
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
SWITCHES, SOCKETS & ACCESSORIES: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, includin...
do: e)10-12 Way
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
do: e)10-12 Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. a) 6A One Way Switch
do: b) 6A Three Way socket
do: c) Stepped Fan Regulator Two Module
do: d)32A DP Switch
do: e)6/16A Universal Socket
do: f)TV/Telephone Socket
do: g)RJ45/I.O Outlet Cat-6
Supplying and fixing regular MCB distributionpanel confirming to IS 8828, on wall/wood board/ flush mounting using required clamps, bolts, nuts etc. With provision for fixing of suitable type capacity...
do: III. Double Door, b)6 Way TP & N
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
do: b) 6-32Amps DP
do: c) 6-32Amps TPN
do: d) 40Amps TPN
do: e) 50-63Amps TPN
L.T. U.G. CABLES AND EARTHING: Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required. a) GI strip, 25x3mm
FANS & AIR CONDITIONERS: Supplying of 1440RPM heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. 12" sweep (300mm)
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
LED INDOOR: Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V...
do: b)LED light fitting 1 x 4' -36/40 W
Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bea...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary len...
NETWORKING & TELECOMMUNICATIONS: Supplying and drawing UTP-CAT 6E LAN cable.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
TN-15.docx
Others - Tender Notification • 0.02 MB
Girls Hostel DINING HALL Model (1).pdf
Others - Drawings • 0.06 MB
kw-3 (2).docx
Others - KW3 • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .