Construction of Government Polytechnic Udhampur (Balance Work)

Amount

BALANCE WORK ACADEMIC BLOCK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) Hindalco/Jindal make only

For shutters of doors, windows & Ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever requires including the cost EPDM rubber/ neoprene gasket required . polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) Hindalco/Jindal make only

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With Float glass panes of 5.50 mm thickness (weight not less than 13.50 kg / sqm) Saint Gobins Make

Providing and fixing 12mm thick pre laminated particle board flat pressed three layer or graded wooded particle board ( conforming to IS : 12823 Grade -I type -II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass stainless steel screws etc. complete ads per architectural drawings and directions of engineer - in- charge pre laminated particle board with decorative lamination on both sides. ( Action Tesa, green lam, century Ply, or archid ply.)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminium 125mm handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing M.S. pressed butt hinges bright finished of required size with necessary screws of required size 1 00x58x1.90 mm butt hinges 75x47x1. 70

fixing of 35mm thick Flush Door shutters Excluding Cost of shutters and Hinges.

Providing & fixing 4.0mm thick clear float Glass panes in Window shutters / fixed frames including fixing Teak Fix Beading. (1.5” x 0.5”0) where required (saint Gobain or equivalent make).

Providing & fixing 5.5mm thick clear float Glass panes in Window shutters / fixed frames including fixing Teak Fix Beading. (1.5” x 0.5”0) where required(saint Gobain or equivalent make).

Providing and fixing M.S grills of required pattern in frames of window etc. with M.S flats square or round bars etc, including priming coat with approved steel primer and two or more coat of synthetic enamel paint all complete, fixed to openings/ wooden frames with rawl plugs screws etc.

Floor/ horizintal expansion joint, Providing and fixing angle iron frame 50mmx50mmx6mmto be fixed with floor by rebaning system and then welding up,keeping the gap of 40 to 50 mm. Flooring area to be provided with polysulphide(Gun grade/pourable) treatment .The thickness of polysulphide shall be half of the width of expansion joint gap. Backfill joint with backing rod/foam to support the polysuphide.Covering of expansion joint with aluminium chequered aluminium plate 2.5mmx200mm(anodized transparent or dyed to required shade according to IS1868,minimum anodic coating of grade AC 15) duly screwed with the angle. .( including cost of cutting floors, embedding in floors as required)

vertical/ Roof expansion joint.Providing and fixing of 2.5mm thick x 200mm wide aluminium strip (anodized transparent or dyed to required shade according to IS1868,minimum anodic coating of grade AC 15) to cover the expansion joint in the building.The cost should be inclusive of cutting of aluminium strips as per site condition including bending,drilling of holes in strips as well as walls /columns with one side hole of oval shape to accomodate movement of expansion joint and fixing with screws/anchors.The cost is inclusive of all scafolding as required at site.

Providing and fixing gang saw cut mirror polished (premoulded and pre polished), machine cut Granite of any colour and shape(18mm thick) for kitchen platform, vanity counters window sills facias, stairs and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.(Area of slab over 0.5 sqm) JET BLACK

Extra for providing edge moulding to 18 mm thick granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Providing and fixing Antiskid, vitrified full body, heavy duty floor tiles 300x300 mm, of 12mm. minimum thickness 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. for ramp

BALANCE WORK ADMINISTRATIVE BLOCK

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr.in all kinds of soil, ordinary/hard rock ordinarycomplete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering- All work upto plinth level 1:1.5:3(1 cement:1. 5 coarse sand :3 graded stone aggregate 20mm nominal size)

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of Centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. TMT bars

Centring and shuttermg including strutting, propping etc. and removal of form for·

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders,bressumers and centilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts

Arches, domes valuts upto 6m span

Edges of slabs and breaks in floors and walls. Under 20 cm wide

Foundations: footings, bases of columns etc. for mass concrete.

Weather shade. Chajjas, corbels etc., including edges.

Brick work with common burnt clay F.P.S.(non-modualar)bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Extra for brick work in superstructure above floor V level for each four floors or part thereof. (By manual means)

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Brick work 7 cm thick with bricks of class designation 75 in cement mortar 1:3 ( 1 cement: 3 coarse sand) in supersturcture.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) with making of groove between brick work and RCC

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) with making of groove between brick work and RCC

20 mm Cement plaster of mix: 1 : 6( 1 cement : 6 coarse sand) with making of groove between brick work and RCC

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (including cost of hold fast lugs or dash fasteners): Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws of required size., Second class deodar wood(35mm thick)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size. Second class deodar wood.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size (Kitply/Century/GreenPly/ArchidPly/Sonear/Truewood make)

Providing & fixing aluminium sliding door Bolts ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. 300x16mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.200 mm weighing not less than 120 gms.

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing & fixing 5.5mm thick clear float Glass panes in Window shutters / fixed frames including fixing Teak Fix Beading. (1.5” x 0.5”0) where required(saint Gobain or equivalent make).

Providing and fixing M.S grills of required pattern in frames of window etc. with M.S flats square or round bars etc, including priming coat with approved steel primer and two or more coat of synthetic enamel paint all complete, fixed to openings/ wooden frames with rawl plugs screws etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing Ceramic glazed floor tiles 300x300 mm, of specified thickness 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeering in Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes of specified thickness with water absorption less than 0.08% and conforming to lS: 15622 of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, columns, floors etc. excluding cost of centering and shuttering , all work upto floor V level

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C., kitchen and the like consisting of : (a) 1st course of applying cement slurry @ 4.4kg/sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding of Junctions of vertical and horizontal surface. (b) lind course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of Junctionsof vertical and horizontal surface. (c) Ill course of applying blown or/ residual bitumen applied hot at 1.7 kg. per sqm of area. (d) IVth course of 400 micron thick PVC sheet. (Overlaps ·-1 at joints of PVC sheet should be 1 OOmm wide and pasted to each other with bitumen @ 1. 7 kg/sqm.

Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations. a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. 25.7 .1 With average thickness of 120mm and minimum thickness at khurra as 65 mm.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outletcomplete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.(JK White/ Birla wall Care)

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer. (Nerolac/Asian paint/Berger/ICI-Dulux)

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. (Nerolac/Asian paint/Berger/ICI-Dulux)

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/10sqm over and including base coat of water proofing cement paint applied@ 2.20kg/10sqm), Finished with two or more coat of Weather coat of required colour as per the direction of the Engineer Incharge. (Nerolac/Asian paint/Berger/ICI-Dulux)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Nerolac/Asian paint/Berger/ICI-Dulux)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on wood work. Two or more coats on new work (Nerolac/Asian paint/Berger/ICI-Dulux)

Providing and laying 50 mm thick with 20mm nominal size stone aggregate. Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry.

Providing and fixing gang saw cut mirror polished (premoulded and pre polished), machine cut Granite of any colour and shape(18mm thick) for kitchen platform, vanity counters window sills facias, stairs and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.(Area of slab over 0.5 sqm) JET BLACK

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Extra for providing edge moulding to 18 mm thick granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanised with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastner 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G. I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick buttom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.l.intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G. I. wire at every junction, including fixing perimeter channels 0.5mm thick 7mm high having flanges of20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at450 mm centre to centre, with 25mm long drive-all screws@ 230 mm interval ,including fixing of gypsum board to celing section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers' specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 2.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 (saint gobins/Lafarage/Dexune/Gyptech or eruivalent make)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. (Jindal make)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) Hindalco/Jindal make only

For shutters of doors, windows & Ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever requires including the cost EPDM rubber/ neoprene gasket required . polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns) Hindalco/Jindal make only

Providing and fixing 12mm thick pre laminated particle board flat pressed three layer or graded wooded particle board ( conforming to IS : 12823 Grade -I type -II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass stainless steel screws etc. complete ads per architectural drawings and directions of engineer - in- charge pre laminated particle board with decorative lamination on both sides. ( Action Tesa, green lam, century Ply, or archid ply.)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With Float glass panes of 5.50 mm thickness (weight not less than 13.50 kg / sqm) Saint Gobins Make

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in charge. With Stainless Steel cover plate minimum 1.25 mm thickness

Honey-comb brick work 10/11.4 em thick with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand)

providing and fixing brick bats around man hols in sockage pit as per design.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and (two or more coats) of ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade all complete.(Tata or Sail make only)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Tata or Jindal make only)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Ridges plain (500- 600mm) (Tata or Jindal make only)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Gutter .(600 mm over all girth) (Tata or Jindal make only)

Providing and fixing of anchor bolt of 20mm dia and 750 mm length with nut and washer complete.

Providing and fixing Antiskid, vitrified full body, heavy duty floor tiles 300x300 mm, of 12mm. minimum thickness 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. for ramp

Plumbing/Sanitary Administrative Block

Providing and fixing on wall face unpplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap of thermal expansion (supreme, finolex or equivalent)

75 mm dia

110 mm dia

160 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. (supreme, finolex or equivalent)

Coupler

75 mm dia

110 mm dia

160 mm dia

Single tee with door

Single tee without door

75 mm bend

110 mm bend

160 mm bend

Shoe (Plain)

75mm Shoe

100mm Shoe

Providing and fixing unplasticised - PVC pipe clips / M.S U Clumps of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid. W.C. pan with lSI marked white solid plastic seat and lid.(Hindware/jaquar/cera/or equivalent)

Providing and fixing white vitreous china flat back half stall urinal basin of 580x380x350mm with Flat White P.V.C automatic flushing cistern, of approved make with fittings, C.I./M.S. brackets, standard size of C.P. brass flush pipe, spreaders with unions and clamps complete, (all in C.P. brass) with waste fitting as per IS:2556, C.l trap with outlet grating and other couplings in C.P brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of three half stall urinals with 10 litre white P.V.C automatic flushing cistern of approved quality.(Hindware/jaquar/cera/or equivalent)

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm with C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.(15 mm nominal bore)..(Hindware/jaquar/cera/or equivalent)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings..(Hindware/jaquar/cera/or equivalent)

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) 1mm thick, kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm, painting of fittings and brackets, cutting and making good the walls wherever required: 610 x 460 mm bowl depth 200mm (Nirali, Neelkanth, Chilly)

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32 mm dia (supreme, finolex or equivalent)

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm (Atul, modi guard or equivalent)

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete (Jaquar, marc, kohler, jainco, or equivalent)

Providing and fixing toilet paper holder C.P. brass (Jaquar, marc, kohler, jainco, or equivalent)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. (Jaquar, marc, kohler, jainco, or equivalent)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than190 gms.(Jaquar, marc, kohler, jainco, or equivalent)

Providing and fixing P/Q/S trap of required angles of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors: 110mm inlet and 100mm outlet of make Supreme, finolex or equivalent

Providing and fixing F/N trap of required angles of self cleaning design with C.P Grating of required size (100mm)with or without hole,screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:110mm inlet and 75mm Floor trap of make Supreme, finolex or equivalent

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc (INTERNAL WORK-Exposed on wall) (Tata/ Jindal/ Surya Parkash / or equivalent)

25 mm dia. nominal bore

32 mm dia. nominal bore

Providing and fixing G.l. Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall (Tata/ Jindal/ Surya Parkash / or equivalent)

15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) (Tata/ Jindal/ Surya Parkash / or equivalent)

25 mm dia. nominal bore

32 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete (Tata/ Jindal/ Surya Parkash / or equivalent) 25 to 40 mm nominal bore

Providing & fixing Gun metal gate ball valve of approved quality conforming to IS : 8931 of 32mm nominal bore ( Leader/ Zoloto/ Jainco/ Kalsi/or equivalent)

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

25 mm nominal bore

40 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, or equivalent having valid lSI license].

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore (Jaquar/ marc/ Kohler/ jainko/or Equivalent

Providing and fixing Long body C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore (Jaquar/ marc/ Kohler/ jainko/or Equivalent

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed

Providing and fixing C.P. Jet with connection pipe(Jaquar/ marc/ Kohler/ jainko/or Equivalent

Providing and fixing C.P Hand bidet shower with nozzle and connection pipe (Jaquar/ marc/ Kohler/ jainko/or Equivalent

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:3 (1 cement: 3 fine sand) including testing of joints etc. complete. 150 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design.

Providing and ixing square- mouth S.W. gully trap grade 'A' complete ,with C. I. grating brick masonry chamber with bricks of class designation 75 and water tight C. I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2. 70 kg as per standard design.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

BALANCE WORK WORKSHOP BLOCK

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr.in all kinds of soil, ordinary/hard rock ordinarycomplete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. TMT bars (Tata or sail make)

Centring and shuttermg including strutting, propping etc. and removal of form for·

Suspended floors, roofs, landings, balconies and access platform.

Foundations: footings, bases of columns etc. for mass concrete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (including cost of hold fast lugs or dash fasteners): Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary, Second class deodar wood(35mm thick)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size. Second class deodar wood.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size (Kitply/Century/GreenPly/ArchidPly/Sonear/Truewood make)

Providing & fixing aluminium sliding door Bolts ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. 300x16mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.200 mm weighing not less than 120 gms.

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing & fixing 5.5mm thick clear float Glass panes in Window shutters / fixed frames including fixing Teak Fix Beading. (1.5” x 0.5”0) where required(saint Gobain or equivalent make).

Providing and fixing M.S grills of required pattern in frames of window etc. with M.S flats square or round bars etc, including priming coat with approved steel primer and two or more coat of synthetic enamel paint all complete, fixed to openings/ wooden frames with rawl plugs screws etc.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.(JK White/ Birla wall Care)

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer. (Nerolac/Asian paint/Berger/ICI-Dulux)

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. (Nerolac/Asian paint/Berger/ICI-Dulux)

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/10sqm over and including base coat of water proofing cement paint applied@ 2.20kg/10sqm), Finished with two or more coat of Weather coat of required colour as per the direction of the Engineer Incharge. (Nerolac/Asian paint/Berger/ICI-Dulux)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Nerolac/Asian paint/Berger/ICI-Dulux)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on wood work. Two or more coats on new work (Nerolac/Asian paint/Berger/ICI-Dulux)

Honey-comb brick work 10/11.4 em thick with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand)

providing and fixing brick bats around man hols in sockage pit as per design.

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and (two or more coats) of ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade all complete.(Tata or Sail make only)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Tata or Jindal make only)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Ridges plain (500- 600mm) (Tata or Jindal make only)

Providing and fixing of anchor bolt of 20mm dia and 750 mm length with nut and washer complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Gutter .(600 mm over all girth) (Tata or Jindal make only)

Supply of River sand, Stone Aggregate and common burnt clay F.P.S (non modular) bricks for already alloted labour contact to Ms Jagdish Singh.

Supply and stacking of Coarse River sand including loading and unloading and duly delivered at site by Mechanical Transport, (stack measurement less by 7% moisture content.)

Supply and stacking of crushed stone aggregates 20mm including loading and unloading and duly delivered at site by Mechanical Transport (stack measurement less by 5% for Voids).

Supply and stacking of crushed stone aggregates 40mm & down guage including loading and unloading and duly delivered at site by Mechanical Transport (stack measurement less by 10% for Voids).

Supply of common burnt clay F.P.S (non modular) bricks of class designation 75 A including loading, unloading and carriage upto site of work and stacking complete

Ravi Kant

Aakar Engineers and Contractors