Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹6.0 L+₹55,172 (10.2%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹6.0 L+₹59,886 (11.0%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹6.4 L+₹97,334.10 (17.9%)Rejected-Finance ROWRIAH KB ROAD PO CHALIHA JORHAT 785004 ASSAM | JORHAT | JORHAT | ASSAM | 785004 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹6.6 L+₹1.1 L (20.8%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹10,900
Closing Date
14 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) JORHAT
GE (AF) JORHAT PIN-785005
PROVISION OF CERTAIN E/M MINOR WORKS AT AFS UNDER GE (AF) JORHAT.
2022_MES_546043_1
8982/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (AF) JORHAT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹10,900
Yes
28 Sept 2022
18 Aug 2022
16 Sept 2022
18 Aug 2022
14 Sept 2022
31 Aug 2022
Amount
Supply and erecting steel tubular swaged pole type 410-SP-37 (9.5 Mtr long) including cast iron base plate, Final taper plug, Cap, Mild steel boults, Nuts, Screws including applying two coats of black bituminous paint internally and externally from bottom end of pole up to PCC coping and applying with two coats of aluminium painting over a coat of aluminium primer (Externally from top of coping) including writing MES pole No. with systhetic enamel paint (First grade quality) complete all as specified and directed. (NOTE : Earth Work, Cement concrete shall be measured and paid under appropriate Items here-in-after.)
Supply and passing through steel tubular pole / service connection, 1100 volts grade heavy duty 4 sq mm size weather proof flat cable PVC insulated stranded aluminium conductor, twin core cable (BTC) complete all as specified and directed.
M & L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm, 4 core, complete all as specified and directed.
Excavation in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, including taking out and laying of cables, etc. and getting out as in soft / loose soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft / loose soil, complete all as specified and directed.
Removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point. complete all as specified and directed.
M&L for sand cushioning (dry) in trenches for protection of under ground cables (below, above and around the UG Cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. (NOTE : For the purpose of payment, punning thickness of sand cushioning shall only be measured and paid).
S&F Sub-Class 'B' brick, well burnt, laid breadth-wise along the length of Cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation for pole complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping for pole including form work and finishing the surfaces even and smooth etc complete all as specified and directed.
S&F cable junction box 200X160X98mm in size, made out of thermoplastic sheet having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32-2 nos) fixed to poles with flat iron clamps of size 25x3mm, nuts, bolts, washers etc. including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and taking out old unserviceable cable junction box complete all as specified and directed. Make : Cat No. K- 8250 of HENSEL or equivalent model in SPELSBERG / SINTEX as approved by GE.
S&F 50 mm bore high density polyethylene pipe (HDPE) of pressure rating 6 kgf / cm2 fixed to walls, ceilings or laid in floors etc. complete all as specified and directed .
M & L for Chemical earthing electrode advance encapsulated compound based CPRI tested maintanance free pipe-in-pipe technology upgraded (zinc & Alloy Coated), zinc coated (80-100) microns with pure zinc (99.9%) and alloy coating (200-250) microns, earthing system confirming IS 3034. The outer & inner pipe should be 76.2mm , 3Mtr length,zinc coated with additional special alloy coating 300mm on the topside for additional corrosion protection of the terminal. the annular space between the pipes being filled up with COMPACT FILL (CF) (crystalline conductive compound). the compact fill (CF) misture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes. the inner pipe should be extended with terminals for connectivity, the job includes digging the pits and refilling the same by electrodite/conductolite back fill compound (Ground Enhancer), the BFC should be eco friendly, it should not contain environmentally hazardous material/metal having ROHS certification from NABL accredited lab. Good earth is to be arranged to fill the excavated pits by mixing the same with bfc 3 bags. including PCC pit in plain cement concreate, type C2 1:3:6 (using 20mm graded stone aggregated) and RCC Cover of size 450 x 450 x 50 mm in RCC T ype B1 1:2:4 (using 20mm graded stone aggregated) reinforced with and including 8.0mm dia TMT bars @ 100mm center to centre both ways complete all as specified and directed.
S&F test point terminal block made of gun metal or phosphorus bronze size 75mmx75mmx25mm drilled and screwed including 3 nos. 8mm dia, 25mm long hexagonal head screw for lighting conductors complete all as specified and directed.
M&L for 20x3mm Copper strip as earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed.
S&F 32 mm dia galvanised iron pipe (light grade) with all fittings and fixtures laid in trench, for mechanical protection of earth strip of chemical earthing etc. complete all as specified and directed.
M/S SANTOSHI TRADERS
M/S D J ENTERPRISE
M/S DHAR AND DHAR
SHRI RAJEN PASWAN
M/S RK SAHA AND CO
M/S BARUAH ELECTRICALS
Bidder Name
M/S RK SAHA AND CO
M/S D J ENTERPRISE
THE SUPPLY AGENCY
M/S DHAR AND DHAR
SHRI RAJEN PASWAN
M/S SANTOSHI TRADERS
M/S BARUAH ELECTRICALS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .