ADDITION ALTERATION AND SPECIAL REPAIRS TO VARIOUS MARRIED ACCOMMODATION (MAP PH-I) AT BHOPAL MIL STN PHASE-I OF III PHASES UNDER GE DRONACHAL

Amount

Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department.

Taking down cement plaster of any description incl Terrazo finish as in dado skirting of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement plaster 1:4 on fair face of brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) incl mixing with integral water proofing compound complete all as specified and directed. Note: Integral water proofing compound will be measured and paid separately

Supply only Integral water proofing compound complete all as specified and directed

M&L for 15 mm thick rendering over fair face or other than fair face brick or concrete surface in cement plaster 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed

M&L for 5 mm thick rendering over fair face brick or concrete surface in cement plaster 1: 3 finishing the surfaces fair & even without using extra cement in ceiling complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004. Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M & L for preparing newly plastered surface of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed over a coat of waterproof putty complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items

M & L for preparing newly plastered surface of walls and applying two coats of oil bound distemper of required shade and colour complete, as per manufacturer's specification, complete all as specified and as directed over a coat of waterproof putty complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items.

M & L for preparing newly plastered surface of ceiling and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and as directed over a coat of waterproof putty complete all as specified and as directod. Note: M&L for Putty work shall be measured and paid for seperately under respective items

M & L for preparing old surfacce of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and as directed over a coat of waterproof putty complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items.

M & L for preparing old surface of ceiling and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre. of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, comolete all as specified and as directed over a coat of waterproof putty complete all as specified and as directed. Note: M&L for Putty work shall be measured and paid for seperately under respective items.

Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and preparing it for further treatment incl making good necessary dubbing out wherever required and removing rubbish from site complete all as specified and as directed

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (et, not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and over Applying evenly a tack coat of in dustrical bitumen 55/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ind Cerment concrete type B-0, 1:24 (12.5mm graded aggregate), 40mm thick incl plastering 15mm thick cement plaster in CM 1:4 finished even and fair complete all as specified and as directed

M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B0 1:2:4 (using 12.5mm graded aggregate) complete all as specified and directed.

M&L for topping with precast machine pressed cement concrete tiles with grey cement and no pigments of size 250 x 250 x 20-22mm thick or as directed by Engr-in-Charge conforming to IS 1:2:3:7-1980 set in cement slurry laid jointed and pointed in neat cement slurry including bedding layer of 20 mm thick screed bed in CM 1:3 complete all as specified and as directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters Each (without taking off shutters from the frame) complete all as specified and directed

M&L for granite (any type) 18-20 mm thick machine cut in steps, jambs, cooking platform, window cills and similar works including 15mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types incl dismantling of stone slabs and tiles of any description complete all as specified and directed

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars Cum etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan Cum exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

S&F for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick AIS Sheet complete all as specified and as directed.

M&L for cement concrete Type B-0 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC Sheet on both side PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including supplying & fixing in the frame of size 50x47mm at site as per specification & drawing complete all as specified and as directed

S&F for 150 mm Aluminium handles, cast type, anodised, complete all as specified Each and directed

S&F 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt Each and fixed and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, extruded brass ISI marked, compound complete all as Each specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door boll with hasp staple (bolt Each type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or kg riveled or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.

M & L for Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as directed

M&L for vitrified ceramic tiles of light shade 8 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, incl dismantling of stone slabs and tiles of any description complete all as specified and directed.

M&L for vitrified ceramic tiles of light shade, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in Dado Skirting etc. over and including 10 mm thick Backing Coat in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tilos, incl dismantling of stone slabs and tiles of any description complete all as specified and directed

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller Each and roller plate complete all as specified and directed

S&F floor door stopper 150mm long of aluminium alloy body and tongue. Each anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for applying 2 mm thick white wall putty on walls complete all as specified and directed

M&L for applying 2 mm thick white wall putty on ceiling complete all as specified and directed

S&F in repair brass mortice lock 4 levers vertical type size 100mm complete all as specified and directed.

S & F aluminium extruded body door closer hydraulically regulated, designation no 3 Each universal type, suitable for door shutter of 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed

S&F Harrison rails, anodised aluminium alloy, with fixing brackets, stops, RM rollors etc incl knobs complete all as specified and directed.

Dismantling of water tank capacity exe 500 ltr but n.exe 1000 ltrs and removing to stores complete all as specified and directed.

S&F 1000 Ltr rotational moulded polyethylene water storage tanks incl ball valve (cylinderical verticle with closed top) hoisted & fixed in position incl Ball brass valves of 20 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F 15 mm Brass wash basin mixer, centre hola, mixing hot & cold water, fancy type, Each with capstan head, chromium plated, screwed down high pressure, screwed for iran pipe etc and fixed in repairs complete all as specfied and directed

S&F in repairs Soap dish holder approximate size 160x160x90mm all as specified

S&F in repairs Towel ring PTMT fixed with and including Chronium plated brass Each screws and wooden/plastic cleats (Minimum weight 90gms).

S&F in repairs wash down water closet with seat cover, waste pipe, cistern with lid. Each sheet covers & fittings (complete set) and fixing complete all as per manufacturer instructions and as directed

S&F in repairs Stainless steel sink with drainage board, 1.00mm thick for kitchen, with Each plug, washers and wastes/coupling, including bedding in cement mortar 1:4 on to dwarf/parapet wall or fixing with granite with pointing in white or grey cement to match or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 180mm fixed complete all as specified and directed.

S&T in repairs 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe complete all as specified and directed.

S&F in repairs Tubular towel rail, 20mm dia, D type, 50cm long between flanges complete all as specified and directed.

S&F in repairs Toilet paper roll holder chromium plated fixing complate all complete all as specified and directed.

S&F in repairs handshower (Health faucet) 1 meter long flexible tube complete all as specified and directed

S&F in repairs looking mirror approved quality with wooden back and edge beading complete with polishing fixed with screws to wall, complete all as specified and directed

S&F in repairs chromium plated/SS grating square slit 150 mm dia with or without hole complete all as specified and directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed.

M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75 mm bore complete all as specified and direcetd.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore fancy type complete all as specified and directed.

S&F in repairs 15 mm bore stop cock (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut, screwed down, screwed for iron pipe or union complete as specified and directed.

Taking down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

Taking down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors fixed with MS clamp complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S & F for 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal, complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack, made up of 0.63 mm thick stainless steel sheet, overall minimum size: 900x750x250 mm fixed to walls with chromium plated brass screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed.

S&F for 18 mm thick plywood with 7 layers of ply for kitchen cabinet , and fixing sunmica over board with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as in cup board/cabinet shutter and shelves and 6mm thick ply back side of cabinet fixing with approved screw complete all as per manufacturers instruction specified and directed.

S&F for Hydraulic Soft close Auto hinges, Thickness 1-1.5 mm, size 8 Inch brass finish 90 Degree opening angle silver colour complete all as specified and directed by Engr-in-Charge.

S&F Drawer/cupboard handles, projection drop (65mm to 75mm) on screwed plate of brass polished/ SS, bright finished complete all as specified and directed.

S&F brass Mortice lock, brass 4 levers vertical type, size 100 mm complete all as specified and directed.

S & F 100 mm hasp and staple, safety type, SS with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for telescopic channel of size 450 mm (when closed), for fixing kitchen basket in it, mild steel chromium plated, roller type, heavy duty fixed to wooden/ metal frame with SS screws complete all as specified and directed.

S&F for kitchen basket fabricated with stainless steel section (SS-304), of best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position on one pair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed.

S&F 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection and similar works finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed

S&F in repairs PVC moulded cabinet with front mirror, size 350mm X450mm with single shutter and minimum 5 compartment complete all as per sample kept in GE office.

M&L in repair powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instruction complete including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors,windows or taking down complete door/window complete all as specified and directed. Note:Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges , filling of gap between wall and window by silicon gel etc complete

M&L for coloured tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles incl dismantling of stone slabs and tiles of any description complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick joint free, square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15 cm in CM (1:6) complete incl dismantling of stone slabs and tiles of any description all as specified and directed.

Demolition of cement concrete in sunken floors incl removing debris outside MD land complete all as specified and directed.

Brushing neat cement slurry with 3.0 kg by wt of cement per sqm mixed with WPC @ 3 % by wt of cement as per manufacturer instruction to fill all hole and crack complete all as specified and directed. Note- Water tightness testing should be done after 24 hrs.

M&L for PCC in 1:1.5:3 type B-0 using 12.5mm graded stone aggregate with integral water proofing compound as per manufacturer instruction on bottom of sunkun portion with proper slope towards spout complete all as specified and directed. Note- WPC will be measured and paid separately.

M&L for plastering on vertical on vertical sides and top surface of CM 1:3, 15mm thick mixed with WPC as per manufacturer instruction. Plaster shall be extended over PCC coving when the same is green i.e PCC & plaster be carried out at the same time complete all as specified and directed. Note-WPC will be measured and paid separately.

M&L for two coats of Dr fixit krystalline water proofing coating compound shall be applied after laying sewage/ plumbing pipes with fixtures in position complete all as specified and directed.

M& L for filling the sunken floor with PCC 1:5:10 type E-2 using brick work aggregate over the treated surface.

M&L for spouts pipe of 50mm dia GI pipe light grade projection 450mm clear of face outer wall with OVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water, if any complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose with swivel joint not less than 50mm dia and not less than 200mm long all as specified and directed.

S&F in repairs 15 mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 110gms) completed all as specified and directed.

Supply and fixing factory made UPVC white colour three track three panels sliding window with fly proof SS 304 wire mesh (Two nos. glazed & one no. wire mesh panels) made of Outer frame 104 x 45 mm & sash 39 x 58 mm both having wall thickness of 2.2 +/- 0.2 mm and single glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 +/- 0.2 mm thick galvanized mild steel section made from cold roll forming process of required length (shape size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, TPE/EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy/SS body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless GI/steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved quality, complete all as specified and directed. Note- (i) Glazed Shutters of sheet/ figured glass thickness not less than 4.8/5.0 mm and wire mesh shutter Same as Glass Shutter with Stainless steel (SS-304) wire meash 0.35 mm dia with aparture l.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. (ii). For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, including fixing of glass not less than 4mm thick complete all as per approved drawing & directed. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Factory made single extruded WPC moulded (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size but of Frame size 50 x 125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and atural fibers (wood powder/ rice husk/ heat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made Solid wood plastic composite (WPC) door frame 100 mm x 50 mm made from wood plastic composite single extruded process) material with density 780 kg/cum as per manufacturer instruction and drawing complete all as specified, directed.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter high density of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F for 30 mm thick solid WPC wire mesh door shutters decorative type laminated of required size comprising of virgin PVC resin of K Value 57-60 (Suspension grade) , calcium carbonate and natural fibres (Wood wood powder/ rice husk/ wheat husk) and non toxic additives , made from exrusion process WPC foam sheet single extruded (Inner) with having min density not less than 600 Kg/Cum , having good screw holding capacity (Screw withdrawl strength 2000 N (face) & 1100 N (Edge), Min compressive of 50N/mm2 , modulas of elasticity 850 N/mm2 and resistence of spread of frame of class A catagory with property of being termite / borer free . Water/moisture proof and fire retardent. WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted on both faces of shutter . For fixing mosquito mesh and XTN aluminium mesh combinely panel area of door except styles and rails to be panelled with mesh with self tapping round headed screws at required distence, screws and edges covered with feathered PVC edge beading alround of mesh and fixing Stainless steel butt hinges of required size with with necessary full body threaded star headed counter shunk SS screws including SS wire mesh/wire cloth complete all as specified and directed. Note :- Material test certificate and authentication should be compulsory provided by the manufacturing company.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense of soil complete all as specified and directed.

M&L for precast cement concrete Type B1 1:2:4(20mm graded aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 incl demolition of existing any complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition and breaking up drain 100mm pipes (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition and breaking up drain 150mm pipes (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition and breaking up drain 200mm pipes (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition and breaking up drain 300mm pipes (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete and post holes including sub base of floors complete all as specified and directed.

M&L for reinforced concrete 200mm pipes, class NP 2, laid and jointed complete with collars complete all as specified and directed.

M&L for reinforced concrete 300mm pipes, class NP 2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to drain 200 mm pipes including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Concrete bed to drain 300 mm pipes including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed.

Removal of surplus spoil/excavated material to a distance upto 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

Returning filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as sspecified and directed.

Dismantling of stone slabs/blocks/tiles of any description or thickness in floors & aprons etc laid over bedded and pointed in any mortar complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC in 1:4:8 type D2 (using 40mm graded aggregate) 100 mm thick as in sub base of hardstanding and finishing cement concrete surface even & rough complete all as specified and directed.

M&Lfor sand cushioning for laying of Interlocking paver block complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type(glossy finish and Rubber Moulded) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments to match with existing complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in cement concrete complete all as specified and as directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any not exc 4 Kg/Sqm complete all as specified and as directed.

M&L PCC 1:2:4 B2 (using 40mm graded stone aggregate) as in post holes, pillars, boundary pillars, post and foundation filling and mass concrete and like etc complete all as specified and directed

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense soil complete all as specified and as directed.

M&L for mild steel angle, flat work as in posts and struts in fencing incl cutting tops to shape as directed drilling holes, notching for wire etc, flat iron fillets (for scruing wire mesh etc) incl all necessary drilling bolting or riveting etc conforming to Fe 410 complete all as specified and directed

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specifed and as directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete all as specified and as directed.

S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long 11 to 15 mm dia complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for Mild steel TMT Bar 6 to 8mmm dia cut to length, bent to shape to required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild seel wire (annealed ) not less than 0.9mm dia or securing with clips quality confirming complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal/Slopping) receive for fair finished surfaces complete all as specified and directed.

S&F for eye door viewer (magic eye) of suitable size fixed with panelled/ flush door shutter complete all as specified and directed

S&F for frames of 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area exc 13 sqcm but n exc 25 sqcm for inbuilt almirah/ cupboard/ cabinet etc including two coat of painting over a coat of primer for fillet complete all as specified and directed.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing glass not less than 4 mm thick, tinted ordinary quality and glazing in doors/ windows or wherever required complete all as specified and directed.

M&L for Modular kitchen for Offrs Accn (Factory made modular kitchen incl of all accessories- Design, manufacture, supply, and installation of factory-made modular kitchen (parallel type) including all specified accessories, manufactured using WPC (Wood Polymer Composite) board with associated hardware, to be vetted by a reputed firm as per direction of GE. The size of kitchen of offrs is approx 1.95 x 3.15 m. (a) Material and Labour (M&L) for WPC Cabinetry, Material: Factory-made, single extruded WPC solid board. Thickness: 18/19 mm, Finish: One Side: White color or as approved, Other Side: Laminated with PVC foil of min. 14 micron thickness using hot melt adhesive.Composition: Virgin polymer (K value 58-60), calcium carbonate, natural fibers (wood/rice/wheat husk), and non-toxic additives.Properties: Density: ≥ 650 kg/cum. Screw withdrawal strength: Face – 1800 N; Edge – 900 N. Compressive strength: ≥ 50 N/mm². Modulus of Elasticity: 850 N/mm². Flame Resistance: Class A (low flame spread). Termite/borer proof, water/moisture proof, and fire retardant. Fittings: Stainless steel piano hinges / soft close concealed clip-on hinges with full-body threaded S.S. countersunk screws. Application: Cupboards, workstations, kitchen cabinets.

(b) Fittings: Handles Drawer/Cupboard Handles: Brass polished / SS. Projection Drop: 65 mm to 75 mm. Mounting: Screwed plate, bright finished. (c) Fittings: Hasp and Staple Size: 100 mm. Type: Safety type, stainless steel. Includes: Hinge pin, bolt to hinge plate Fixing: SS screws. (d) Fittings: Telescopic Channels Size: 450 mm (closed length).Material: Mild steel, chromium-plated. Type: Roller type, heavy duty. Fixing: SS screws to Wooden/metal frame.Usage: To hold kitchen baskets.

(e) Kitchen Baskets (SS-304)Material: Stainless Steel (SS 304 grade).Dimensions approx : 430 mm (W) x 508 mm (D) x 200 mm (H).Applications:Plate rack (02 units, double layered).Corner stand (01 unit).Pot stand (03 layered, 01 unit).Cylinder tray (01 unit).Bottle stand (03 layered, 01 unit).Installation: Mounted on 450 mm telescopic channels as above.Wall Shelves Minimum 2 compartments in wall shelf above kitchen platform. Note:- (i) Before commencement of modular kitchen, contractor may be submiited the drgs/ layout for modular kitchen as per specification to be approved by GE. (ii) Any items required as per approved modular kitchen during execution of work may be deemed/ included in the item without any finacial matter. (iii) All work to be executed as per direction of Engineer-in-Charge. Modular kitchen design must be approved by a reputed design firm as per instructions and approved by GE. (iv) All hardware and accessories to be of approved make and high quality.

M&L for reinforced cement concrete (Nominal mix ) type B1 1:2:4 (20 mm graded stone aggregate) for slab supported on walls etc all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, celling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc.

Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting, Security light bulb of any size and make from the site and making good surface complete all as specified and directed

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ISI marked terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC Insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth duly complete all as specified and directed for One light/fan point controlled by one way switch

One bell point controlled by one way switch

One light point controlled by two 2 way switches, with FRLS cables of 1.5 sqmm complete all as specified and directed.

One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 2.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

All as per item No 143.03 but Same board.

All as per item No 143.03 but copper conductor 2.5 sqmm for 15 amp socket outlet.

M & L for power point with insulated stranded copper conductor cable 4 Sqmm single core two run and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to earth dolly complete all as specified and directed.

M & L Submain wiring with three run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25 mm dia ISI marked alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed Note: Three runs of 10 sqmm cable and one run of PVC conduit shall

M&L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC Insulated. unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia 101 marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L in replacement switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement switch Modular type 6 Amps 2 Way, 1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement switch Modular type 16 Amps 1Way, 1 module with indicator modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

M&L in replacement Modular TV Socket incl 10 mtr Disc wire complete all as specified and directed by Engineer in charge.

M&L in replacement Modular telephone socket incl 10 mtr Disc wire complete all as specified and directed by Engineer in charge.

Suppy & fixing MCB Protected Socket 20 Amps, PVC Plastic Base (white) with Plug top & MCB SP 20 amps complete all as specified and directed.

M&L ceiling rose 3 phase PVC polycorbonate, isolated body.

M&L bell ding dong AC,230 volts, single pole all as specified and directed by Engr in Charge.

M&L for angle Lamp holder with metalic ring, pvc/ polycarbonate type back plate with LED bulb 09 watt, 900 lumens out put, 6000 to 6500K suitable for B-22 base all as per directed.

Supply and fix LED batten luminaire surface mounted,4 feet system wattage 20 Watts with lifetime of 50000 buming hours. CRI>80, Power Factor > 0.95, THD 10%, colour temperature - 6000 to 6500K, surge protection 2.5KV, IP-20 protected, meets LED IS specifications, Class-1, Short circuit and over circuit protection, voltage range 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free and including connecting up with PVC sheathed suitable sizecopper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed. Note: All old servicable fittings will be deposited to MES yard

Supply and fix LED ballen luminaire surface mounted 2 feet system wallage 10 watts and not less than 1200 Im with lille time of 50000 burning hours with CRI 80 power factor 0.95. THD 10% color temperature-0000 to 6500 K surge protection 2.5 KV, IP- 20 protected meets LED IS specifications, Class 1. short circull and over circull protection, voltage range 150 to 270 volts AC temperature range 0 to 50 Degree C. system efficiancy of Luminane level 2120 Lumens/watt, flicker free and including connecting up with PVC sheathed sullable size copper conductor flexible wire fixed with 5 years of replacement warranty on fittings complete all as speciled and directed Note - All old servicable fittings will be deposited to MES yard

S&F in replacement of decorative type wall mounted luminaire with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base, complete all as directed.

Taking down carefully existing Geyser of any size and make from its position after disconnecting electric connection and checking it for its serviceability and fix the same as specified and directed .

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and inci provision and connecting up of SS braided pipe with adopter for Inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product, minimum 3 years warranty on heating element and minimum 7 years warranty on inner tank. Note: old unservicable geyser will be deposoted in MES yard.

S&F 25W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarne should more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor> 0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia Gi light grade pipe 1.5 meter length bend to shape and necessary clamps etc for foxing the light fittings on wall fixed complete as specified and directed.

Taking down any type of Ext fan ceiling fan cable end, dismantling blades and removing fan and blades to E/M store

Supply and fixing Exhaust fan 300 mm sweep(steel Body), 900 RPM, metallic body including metalic blade single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed. Note: All servicable Fan will be deposited to MES yard.

Supply and fixing Ventilating Fan 250 mm sweep, 900 RPM, non metallic resin body, single phase 230 volts AC 50 Hz. and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 samm for connection from ceiling rose to fan complete all as specified and as directed.

M&L for breaking old existing wall and making a provn for fixing of 300 mm sweep exhaust fan/250 mm fresh air fan including making good to the disturbed wall portion and matching with existing colour all as specified and directed

Supply and fixing ceiling fans complete with blade, down rods, Including electronic regulator and accessories rated speed not less than 330 RPM, 230 V, 1200 mm sweep, air delivery not less than 220 CMM with service value not less than 6, BEE five star rated voltage range 140-280 volts power factor> 9 and THD <20% with brushess direct current motor (BLDC) all as specified and directed Note: Dawn rods length should be as per site requirement

S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp. 25 ΚΑΤP MCCB adjustable thermal and fixed magenetic release as incomer (Vertical type double door, 100 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of Epoxy powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole 100 amp MCCB as incomer and SP/TP MCBs as outgoings complete all as specified and directed.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN-MCB 63 Amp as incomer complete all as specified and directed.

Taking out old UNSN and M&L earthing complete with Gl electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm Gi tubing light grade and necessary fitting for protection of Gl strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B0 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade Gl pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed.

M&L distribution board SPN 12 way with 200 Amp rated bus bar double door complete all as specified and directed

Supply and fix amp rating 240V 10 KA 'B' curve MCB SPN 40 A current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed

Supply and fix in repair TPN MCB 40 Amps, TP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed

Supply anf fix amp rating 240V 10 KA'B' curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed

S&F wall mounted fan 400 mm sweep aerodynamic designed air delivery a 70 CMM, thermal over load protected motor 3 blade white colour, 230 Volts, 50 Hz not more than 1450 RPM with 90 degree oscillation and having speed & oscillation control by two pull cords system all as specified and directed

S&F auto clean glass electric chimney with inverter technology BLDC motor 60 cm 1400 m²3/h (6002 BLDC AC) BLDC type 150 watt Motor 9 nos speed control RPM up to 2500, Low noise GPSP painted glass Connection rating (w)-213 Watt, current -2 Amp, voltage 220-240 Voll 50 HZ frequency turbo function, Dimensions 60x52x62 in cm all as specfied and directed.

Taking out old UNSV electric meter and deposited to E&M store yard alongwith old and new meter reading duly singed by MES rep,user rep and contractor and Supply and Installation of Smart Three Phase Meter with the following specifications: (a) AC three Phase four Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS 16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. (b) Meter Should support the following data: 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 15 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand (c) Meter should have connect/disconnect functionality operable from prepaid billing software (d) The meter should support open communication protocol DLMS with the software (e) Meter can be integrated with existing or proposed AMI Sytem of any service provider. (f) Meter can be run in both prepaid and postpaid mode (g) The meters would carry 10 year warranty. (h) The meter OEM would share meter Password, authentication details, API, protocols, HLS, LLS password etc. for integration with third party system. Alternatively, the meter OEM would share the web services for the head end integration

Taking out old any type electronic meter and refixing after complete or before handed over to user in each qty all as specfied and directed.

M/s Khialdas Constructions (BID ID -3371682)

SHREE KRISHNA INFRASTRUCTURE (BID ID -3380014)

ATUL CONSTRUCTION CO. (BID ID -3372211)

SOOD ASSOCIATES PVT LTD (BID ID -3372480)

Raja enterprises (BID ID -3380532)

SATYA PRAKASH BUILDERS LTD (BID ID -3371635)