338/W/EDC-I/SRE/2023-24

Amount

Detail of Work

Safely carrage of PCC Pole 8.5 Mtr Long from ESC SRE to site of work including loading and unloading at both ends.

Erection of single support on PCC/ST poles up to 8.5 Mtr Long with complete fitting of all accessories of 11 KV/LT Line as per RESPO specification

Fabrication and Erection of double pole 8.5 mtr long PCC Poles with complete fitting of bracings & other accessories as per RESPO Specifications.

Safely Carriage of XPLE Cable size 3x185 from ESC SRE to site of work including loading and unloading at both ends.

Safely carriage of Line Material (Except PCC/ conductor)ESC SRE to site of works through privet vehicle including loading and unloading at both ends. (Distance 0 to 30 K.M.)

Safely laying of XLPE Cable size 3x185 sq.mm

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Making an fixing of 11 KV Cable jointing kit size 3x185 sq.mm indoor side

Making an fixing of 11 KV Cable jointing kit size 3x185 sq.mm Outdoor side

Removal of 100 KVA T/F from the existing D/P after opening HT & LT connection and with shifting the T/F from the site to ESC, SRE/JE store with loading & unloading at both ends.

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends. (Dist. Upto 25 km.)

Constriction of plinth for installation of 250 kv T/F of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick RCC top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall.

Safe installation of 250 KVA T/F on the Plinth with complete fittings including making connections and commissioning.

Wire mesh fencing of 250 KVA T/F size 2.5x2.5x2.5 mt. grouting making frame of MS angle 45x45x6 mm and fixing four no. MS strip size 25x6 mm at equal distance in between the frame and fixing squre mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6'x3' with sitakni & Dandala.

water level Earthing of 250 KVA T/F by boring of till water level minimum 60 Ft deep & fixing of G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 50x6 mm and copper wire (06 No) at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Safely Carriage of 11 KV O/G VCBs form ESC SRE to site of work including loading and unloading at both ends.

Safely Installation of 11KV O/G VCB (200/100/5A) 350 MVA and connection properly

Providing of Nut & Bolts

Providing of all type clamp

Providing of Brass Lug

Laying of LT/XLPE cable 1*240 sq.mm/3.5*70 sq.mm as per respo specification.

SAINI ASSOCIATES