Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Jitender Singh, IDSE, EE
GE (N) Bathinda
PERIODICAL SERVICE IN MD AND OTM ACCN UNDER AOR OF AGE B/R-III OF GE (NORTH) BATHINDA AT BATHINDA MIL STN
2026_MES_799603_1
8941/NIT-61/26-27/E8
Open Tender
Civil Works
Item Rate
180 days
Bathinda
Class D Category a(i)
8 documents required · 8 mandatory
₹500
GE (N) Bathinda
₹99,000
Yes
20 Nov 2026
20 Nov 2026
7 Dec 2026
20 Nov 2026
4 Dec 2026
27 Nov 2026
20 Nov 2026 - 26 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down existing cement plaster of any description and thickness from internal and external surfaces of walls, soffits, chajjas, parapet walls, ceilings and similar surfaces, including raking out masonry joints, hacking concrete surfaces to provide adequate key for replastering, scrubbing and washing down the surfaces with water, removing all loose mortar, plaster and debris, and leaving the surfaces clean and ready for receiving fresh plaster, complete all as specified and as directed by the Engineer-in-Charge. | 900 | Square Metre | - | - |
| 2 | Material and Labour for providing and applying 15 mm thick cement plaster in two layers, comprising 10 mm thick undercoat and 5 mm thick finishing coat, in cement mortar (1:4), on brickwork or concrete surfaces of walls, soffits, chajjas, parapet walls and similar surfaces, including mixing of liquid waterproofing compound in the mortar strictly as per the manufacturer's instructions, preparation of surfaces, raking out joints wherever required, applying plaster in two layers, finishing the surface even and smooth without using extra cement, curing and all necessary scaffolding, complete all as specified and as directed by the Engineer-in-Charge.
Note: Liquid waterproofing compound shall be measured and paid for separately under the appropriate item of the BOQ. | 520 | Square Metre | - | - |
| 3 | Material and Labour for providing and applying 10 mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, including preparation of surfaces, raking out joints wherever required, application of plaster to the required thickness, finishing the surface fair, even and smooth without using extra cement, curing and providing necessary scaffolding, complete all as specified and as directed by the Engineer-in-Charge. | 300 | Square Metre | - | - |
| 4 | Material and Labour for providing and applying 5 mm thick cement plaster in cement mortar (1:3) on fair faces of concrete surfaces such as ceilings, chajjas, facias, projections and similar surfaces, including preparation of surfaces, hacking and roughening of concrete surfaces to provide adequate key, applying plaster to the required thickness, finishing the surface fair, even and smooth without using extra cement, curing and providing necessary scaffolding, complete all as specified and as directed by the Engineer-in-Charge. | 80 | Square Metre | - | - |
| 5 | Supply only approved quality liquid waterproofing compound of make as specified in the List of Makes/Manufacturers under Appendix 'B' here-in-after, suitable for mixing with cement mortar/concrete, conforming to relevant IS specifications, wherever applicable, including delivery at site, proper packing, handling and storage, complete all as specified and as directed by the Engineer-in-Charge.
Note: The waterproofing compound shall be used in cement mortar/concrete strictly in accordance with the manufacturer's recommended dosage and instructions. | 19.4 | Litre | - | - |
| 6 | Material and Labour for complete removal of existing surface treatment of any type, description and thickness, including paint, coating, plaster residue, waterproofing treatment or any other applied layer from walls, RCC surfaces, ceilings, chajjas, roof projections and similar surfaces, using mechanical sander/grinder machines fitted with suitable suction and dust-collection vacuum bags, including removal of all types of roots, vegetation and trees grown on walls, roofs and building surfaces, cleaning and removal of loose particles, dust and debris, and making good the affected surfaces with cement mortar of suitable mix and thickness to obtain a sound, even and smooth surface ready for subsequent treatment, including all necessary tools, plants, equipment, scaffolding and disposal of removed materials, complete all as specified and as directed by the Engineer-in-Charge. | - | Square Metre | - | - |
| 7 | Material and Labour for preparing and applying ready-made acrylic wall care putty of approved make on internal wall surfaces, in two or more layers, to achieve a total thickness varying from 1.5 mm to 2.0 mm, as required for proper levelling and desired smoothness of the surface, including filling of undulations, minor surface imperfections and depressions, application of putty uniformly, rubbing and sandpapering after each layer, removal of dust and preparation of the finished surface to obtain a smooth, even and uniform finish, ready to receive subsequent painting treatment, complete all as specified and as directed by the Engineer-in-Charge.
Make: Acrylic wall care putty shall be as specified in the List of Makes/Manufacturers under Appendix 'B' here-in-after and shall be compatible with and recommended by the manufacturer of the paint to be applied.
Notes:
(i) After completion of wall putty application and preparation of the surface, the contractor shall inform the GE and the Engineer-in-Charge for inspection. Further finishing work shall be commenced only after approval of the prepared surface by the GE and the Engineer-in-Charge through a Site Order.
(ii) The make of acrylic wall care putty shall be as per the recommendation of the manufacturer of the paint being used for subsequent finishing treatment. | - | Square Metre | - | - |
| 8 | Material and Labour for preparing old and new internal wall surfaces, duly treated with wall care putty, and applying one coat of approved quality interior acrylic emulsion primer @ 11.00 sqm per litre, followed by two coats of approved quality interior acrylic emulsion paint in light shade as approved by the GE, at a coverage rate of 10.00 sqm per litre for two coats, applied uniformly by roller/brush to achieve a smooth, even and uniform finish, including cleaning, dusting, light rubbing with sandpaper, removal of loose particles and all necessary surface preparation between coats, complete all as specified and as directed by the Engineer-in-Charge.
Make: Interior acrylic emulsion paint and compatible interior emulsion primer shall be of makes specified in the List of Makes/Manufacturers under Appendix 'B' here-in-after, and the primer shall be as recommended by the manufacturer of the interior emulsion paint. | 4,500 | Square Metre | - | - |
| 9 | Material and Labour for preparing existing treated internal wall surfaces and applying one coat of approved quality interior acrylic emulsion paint in light shade as approved by the GE, at a coverage rate of 20.00 sqm per litre for one coat, using roller, including filling of depressions and minor surface imperfections with ready-made acrylic wall care putty, rubbing and sandpapering to obtain a smooth and even surface, removal of dust and loose particles, applying one coat of compatible interior emulsion primer @ 11.00 sqm per litre for one coat, as recommended by the manufacturer of the interior emulsion paint, and applying one finishing coat of interior acrylic emulsion paint uniformly to achieve an even and uniform finish, complete all as specified and as directed by the Engineer-in-Charge.
Make: Interior acrylic emulsion paint, interior emulsion primer and acrylic wall care putty shall be of makes specified in the List of Makes/Manufacturers under Appendix 'B' here-in-after. The primer and wall care putty shall be compatible with and as recommended by the manufacturer of the interior acrylic emulsion paint. | 7,500 | Square Metre | - | - |
| 10 | Material and Labour for preparing old and new external wall surfaces, RCC surfaces, soffits of chajjas, roof projections, cantilevers, balconies and similar surfaces, and applying one coat of approved quality exterior acrylic emulsion primer @ 11.00 sqm per litre for one coat, followed by two coats of approved quality exterior acrylic emulsion paint in light shade as approved by the GE, with highlighter in any approved contrasting shade, at a coverage rate of 5.00 sqm per litre for two coats, applied uniformly by roller to achieve a smooth, even and durable finish, including complete surface preparation, cleaning, removal of dust, dirt, loose particles and existing flaking paint, filling minor cracks and surface imperfections, rubbing with sandpaper wherever required and all necessary preparatory work, complete all as specified and as directed by the Engineer-in-Charge.
Make: Exterior acrylic emulsion paint and compatible exterior emulsion primer shall be of makes specified in the List of Makes/Manufacturers under Appendix 'B' here-in-after. The primer shall be as recommended by the manufacturer of the exterior acrylic emulsion paint. | 9,500 | Square Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.12 MB
tenderdocuments61.pdf
Tender Documents • 0.85 MB
BOQ_897137.xls
BOQ • 0.82 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .