ADDN/ALTN OF BLDG NO 101 (COOK HOUSE CUM DINNING HALL) AND BLDG NO P-109 (MAIN OFFICE) OF 20 INF BDE CAMP AT ITARANA CANTT ALWAR

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins, pillar, ashlars masonry and removal of debries complete all as specified & directed.

Demolition of cement concrete (un-renforced) in ground floor and paving exc. 15 cm thickness (below or above ground level.) & removal of debries complete all as specified & directed.

Taking down Chowkatts or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and directed.

Taking down Chowkatts or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm each & removing to store complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster of any description on brick or stone surfaces complete all as specified & directed.

Taking up or down 15mm steel tubing and connections, complete all as specified & directed.

Taking up or down 20mm steel tubing and connections, complete all as specified & directed.

Dismantling/demolition water tanks of capacity n.exc 500 ltr and removing from site complete all as specified & directed.

Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in CM (1:4) complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed.

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples or nails and screws complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality, in squares n.exc 0.5 Sqm each pane complete all as specified & directed.

S&F 3 mm thick sheet glass, ordinary quality, in squares n.exc 0.5 Sqm each pane complete all as specified & directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F Butt hinges 100mm long medium weight, stainless steel complete all as specified & directed.

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 150mm 'D' type, anodised aluminium handles complete all as specified & directed by Engr-in-Charge.

S&F 150mm floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel spring, fixed to doors complete all as specified and directed.

S&F 300mm anodised aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete with and including taking down existing ventilator of any description and in any position complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC (1:2:4) type B-0 to match the finish of existing floor complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed

S&F Steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall deemed to be inclusive of lugs and FI required for fixing wire cloth, Sheet Glass, Grills, iron mongry and guard bars as shown on drg.

S&F powder coated anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F Powder coated anodized aluminium door shutters, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles 2 Nos in each door, hinges type B-21 100mm long (3 Nos), complete all as specified & as directed.

S&F Powder coated anodized aluminium window and ventilator shutters, sliding Type or Fixed Type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as suitable handle (1 No.), rollers and roller support rails for each complete all as specified & as directed.

S&F Powder coated anodized aluminium window and ventilator shutters, side hung type or without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregate) as in floor complete all as specified & directed.

M&L non skid ceramic tiles 7 to 8mm thick(square/rectangular) colored tiles area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including15mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L vetrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces as dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified and directed.

M&L False Ceiling Complete With Armgyp-FB ceiling Tiles of Size 595mmx595mm, 9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) suspended from ceiling with provision of galvanised wire 4mm dia and wall tapping screws including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer's instruction complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

S&F Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L 75 mm thick PCC(1:3:6), Type C1 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even complete all as specified & directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L 20mm thick machine cut granite (of any type) tiles , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing laid over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L 20 mm thick granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 10mm thick rendering in CM (1:4) for recieving stone etc complete all as specified and as directed.

M&L plain cement concrete 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall chajja including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified & directed.

M&L rendering 10mm thick in CM (1:6) on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on brick or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified and directed Note :- Water proofing compound shall be measured and paid separately here-in-after.

Supply only Integral water proofing compound

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L complete removal, washing, rubbing down and stopping of old decorated surfaces and painted surfaces of walls ,plastered or unplastered including cornices, plasters etc and applying two coats of of wheather coat/apex paint (Exterior emulsion) over a coat of priming paint of approved shade/tint complete all as specified and directed.

M&L preparation of newly plastered surfaces and undecorated surfaces of walls, including cornices, plasters etc and applying two coats of wheather coat/apex paint (Exterior emulsion) over a coat of priming paint of approved shade/tint complete all as specified and as directed.

M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L preparation of newly plastered/undecorated surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L preparation of newly plastered surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer on walls complete all as specified and directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over with and including 1 mm thick Birla white wall care putty complete all as specified and as directed.

M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of white wash complete all as specified and as directed.

All as per serial item No. 63.00 above but on ceiling surfaces

M&L preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed.

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed.

S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed.

S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed.

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.

S&F ball valves brass high pressure with polythelene float and fly nut complete, screwed, iron pipes 15 mm dia complete all as specified & directed.

S&F in repair 15mm bore fancy type bib taps, chromium plated alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repair white vitreous china wash hand basin 'Flat back' of size 450mmx300mm fixed with and including new brackets CP waste coupling and 32mm PVC Waste pipe complete all as directed.

S&F white vitreous china under counter basin size 450mmx525mmx195mm shape oval of jaquar/cera or equivalent including 32mm dia CP waste coupling complete all as specified and directed.

S&F in repair 15 mm bore stop/angle valves, fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore swan neck cast copper alloy pillar tap weight not less than 400gms screwed for iron pipe or brass ferrule fixed complete all as specified and directed.

S&F PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580mmx440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm dia tubular towel rail, 'D' type, 60cm long between flanges of Brass chromium plated complete all as spcified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified & directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed.

S&F PVC (SWR) vent cowl 110mm complete all as specified & directed.

S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.

S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed.

Dismantling of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

M&L rubber moulded concrete colour tiles with grey cement pigment of size 300 mm x 300 m x 22-25 mm thick laid over with and including 20 mm thick screed bed in CM (1:6) as in floors complete all as specified and directed.

M&L machine cut kota stone slab flooring 20 to 25mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over with and including 20mm thick screed bed in CM (1:6) including rubbing and mirror polishing complete all as specified and as directed.

M&L kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over with and including 10mm thick rendering in CM (1:4) including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including removing the old pipes and making good the disturbed surface to match with existing finish complete all as specified & directed.

Demolition Mud/PCC in roofs padding any thicknes, including plastering , existing treatment and cleaning (whether full thickness removed or only or part thereof) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed.

M&L PCC 1:2:4, Type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in minimum slope 1:30 over roof complete all as specified & directed.

M&L 15mm thick rendering in CM (1:4) with water proofing compound over green concrete surface, finished even and smooth (without using extra lime or cement) complete all as specified & directed. Note :- Water proofing compound shall be measured and paid separately here-in-before.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces over bituminious primer complete all as specified & directed.

M&L APP based plymeric membrane weighing minimum 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by torch on application method with overlaps 100mm on length side and 100mm on the width side as per manufacturer's instructions with fabric (weight not less than 150 gms/sqm) on primed surface complete all as specified.

Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4), Type B1 as required complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.

M&L RCC type B1 (1:2:4) (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the likes; all as specified & as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L roof truses (framed), trussed, purlins, cranes gantries, rail and fastening and heavy bracket framing (Beam , tee, angle , channel or flat section) Fe 410-W (Gde-E250) quality A including distance pieces, cleats, bracket, etc complete

M&L 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape , drilling holes requires complete all as specified and directed

S&F Pre laminated particle board, 18/19mm thick, interior grade, prelaminated both sides with decorative choise lamination fixed with screws complete all as specified and directed

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.

All as per item No. 115.00 here-in-before but for one exhaust point controlled by one switch and regulator

All as per serial item No. 115.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No.115.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 115.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

S&F socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts.

S&F socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 25 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

S&F Sheet metal enclousure double door type ,suitable for fixing TPN with 200 Amps rated bus bar ,vertical DB 4 way TPN 415 Volts complete

S&F sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.

S&F MCB 63 Amp, three pole & neutral, 415 Volt complete all as pecified & directed.

S&F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as pecified & directed.

S&F MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 50 sqmm 3.5 core all as specified and directed

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M&L 40mm dia GI pipe, Light grade for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and directed.

S&F in repair of GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of the following sizes :- (a) 25mm bore Note :-Excavation and earth work will be measured and paid separatel under relevant items.

S&F in repair 25mm bore gun metal gate valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, ISI marked complete all as specified and directed.

S&F electric water heater,storage type steel body with copperinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Starrated complete all as specified and as directed

S&F exhaust fan in repair AC single phase 230/240 v of size 300 mm sweep with louver all as specified and directed.

S&F ceiling fan complete with electronic type regulator and accessories 230v, 1200mm sweep BEE 5 star rated complete all as specified and as directed.

S&F post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant

Excavating in trenches n.exc 1.5 metre wide and n.exc. 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. including cutting /chasis and making good the distrub surface19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling all as specified and directed

M/S JINDAL ENTERPRISES

shiva construction

Radha Enterprises

M/s Laxmi Enterprises

J.J.ENGINEERING