10 nos IEC Display Boards to be installed at different ghats under different wards Kanai Sarkar Ghat w 5 Rani Ghat Strand Road w 12 Gopi nath Ghat w 12 Bhattacharya Ghat Urdibazar w12 St Josephs Convent Ghat w 16 New Teli Ghat w 17 and 24 Gopalb

Earthwork in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) Including ramming spreading or stacking the spoils within a lead of 75 m. As directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required Complete (a) Depth of excavation not exceeding 1,500 mm (Ref: PwD BID Pg 01 Item 2 a]

Ordinary Cement concrete (mix1:2.4) with graded stone chips (20mm nominal size excluding shuttering and reinforcement, if any in ground floor and foundation

Ordinary cement concrete (mix 1:1.5 3.) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor floor as per relevant is codes. a) pakur variety [Pg 24 Item 4a)] Analysed Rate as per schedule

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, and striking out after completion of works (upto roof of ground floor) (a) 25mm to 30 mm thick wooden shuttering as per decision & direction of Engineer in Charge [Pg 42tem 36a)) Holding down bolt with nut including 100x100x6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or

Cement grout as directed ii) 20mm dia bolt (pg103item 711c)

The rate includes the cost of all M.S hollow section, all incidental charges (such as electricity, labour, insurance) ect complete payment to be made on the basis of calcuated weight of structural mwmebrs of MS hollow section as specifid in relevent IS code in Finished the actual weight of such item with weight of finished structural members. For others Structural Work etc. structural works etc i) for other structural works etc [ 101 item 2A ii]

Suppling 1 5mm thick MS sheet Erted and on one or voth faces of MS/Wgte etc with poist welding at hot more than 150mm apart complete in all respect design including cost of a isbour and and materials

Welding in MS structural work with por eletric (a) Tack/continious weld Pg 111/Rem211

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand preparing etc (Pg 200tem 1a) painting with ready mixed Black Japan of approved make brand

For Carriaging the structure from workshop to site

Drilling holes of requisite diameter in RS joists channels, tees plates (b)Dia above 12mm and depth upto 10 mm (PG102 tem 4bi)

Add 18% SGST

Add 1% cess