ADDN/ ALTN TO FACADE OF VARUNIKA COMPLEX, ADDN/ALTN AND IMROVEMENT OF NAVY BRASS BAND COMPLEX, SPECIAL REPAIRS TO ROOM NO 23 AT BUILDING NO P-11, PROVN OF 14 NOS WALL MOUNTED WATER CLOSET IN DIFFERENT FLOORS AND CONNECTED WORKS AND PROVN OF GALVALUME

Amount

Demolition of brickwork built in Cement mortar or cement lime mortar incl all quoins, arches, pillar etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of cement concrete unreinforced in any description, in any position, not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish outside MOD land complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.00 sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

M&L for Brickwork with old size sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for reinforced cement concrete type M-30 or (1:1.5:3) (using 20 mm graded granite stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

All as per item No. 9.00 here-in-before but 6mm to 8 mm dia

M&L for Mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete complete all as specified and directed.

M&L for 5mm thick rendering on ceiling surfaces in Cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair or other than fair faces of brickwork or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new or untreated plastered wall/ceiling surfaces and applying two coats of oil bound distemper over 1.5mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L for two coats of oil emulsion distemper over a coat of alkali resistant primer including preparation of newly plastered surfaces complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair/unfair faces of brickwork or concrete surfaces finishing even and smooth without using extra cement, mixed with WPC liquid @ 200 ml per bag of cement on walls. (WPC shall be measured and Paid separately) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Excavation over areas not exc 1.5 deep and getting out in soft/loose soil complete all as specified and directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil etc complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for 100 mm cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub base, floor complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick as in backing coat of tiles on fair faces of brickwork or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for Vitrified double charged, dark shade tiles 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size and colour of tiles will be approved by GE) complete all as specified and directed.

(a) M&L for demolition of existing roof treatment of any description including tiles PCC/Mud phuska and removing outside of Defence land complete and clean the surface, remove dust, dirt, loose particles and unsound concrete / cement portion , making grooves in continuous crack portions , filling groves with CM 1:1 with approved WPC and providing 20 mm thick cement mortar (1:3) mixed with Dr Fixit tonic liquid 200 gram/bag (or equivalent in SIKA, FOSROC. (b) Applying evenly a tack coat of bituminous primer @0.4 ltr /Sqm. (c ) S&F APP polymeric water proofing membrane 3mm thick and weighing not less than 3.5 kg/sqm, black finish, reinforced with non woven polyester matt at core (weighing not less than 160 gms/ sqm) with a thermo finish polyethylene sheet on both sides, laid by torching application with a butane gas torch with an overlap of 100 mm at the sides and 150mm at the ends as per manufacturers instructions. (d) M&L for providing hydraulically pressed PCC tiles of size 250X250mm X 20 - 22 mm thick with grey cement machine made laid over and including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound and gap between tiles not exceeding 8 mm, grouted with full thickness of tiles with cement mortar 1:3 mixed with water proofing compound complete all as specified and directed. Make: STP Ltd / IWL or equivalent as approved by GE (Rates for WPC included in this item)

M&L for providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.

M&L for 12mm thick toughened glass door fixed with stainless steel floor springs, 2-nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, sketching of approved design on the glass complete all as specified and directed. (Note: Floor spring and handles shall be measured and paid separately)

Supply only 32 mm dia 600 mm long handle suitable for glass door complete all as specified and directed.

Supply and fix Stainless steel body and internal mechanism heavy duty concealed floor spring suitable for 12mm thick glass door 1.1 mtr span fixed on tiles or granite surface complete all as specified and directed

Supply and fix stainless steel body locking arragement suitable for glass door complete all as specified and directed

M&L for GI powder coated micro perforated micro look false ceiling with fleece lay-in-type, 0.50mm thick, suitable for grid/frame module of 600mm x 600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastener wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm celing etc complete all as per specified and directed (Make: Armstrong /Hunterduglas/ Everest)

Dismantling ceiling boards of any description and any thickness, including cover fillers and frame/grid work of false ceiling any type complete all as specified and directed.

S&F18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws and SS cleats as in modular kitchen cabinets/cupboards cutting and making required size and shape at site including lipping portion match with laminated colour complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specified and directed.

M&L for rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F (in repairs) 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layers (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings complete all as specified and directed.

S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F continuous (piano) hinges, brass, 30mm width of flaps (when open) complete all as specified and directed.

S&F magnetic catcher with 8mm dia ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 20mm bore complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valve with iron wheel head screwed both ends to GI pipe fixed in repairs complete all as specified and directed.

M&L for complete removal of existing treatment from old/new surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and incl one coat of 1.5mm thick putty all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and drected.

M&L for Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundation complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces including preparation of surface complete all as specified and directed.

M&L for Steel work in tubular trusses round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confirming IS complete all as specified and directed.

M&L for mild steel framed work as in stringers, treads landings, balusters, hand rail etc including cleats, and steel plates, wind ties complete all as specified and directed.

M&L for mild steel framed work as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new surfaces of any description including preparation complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, including wooden battens/trusses complete all as specified and directed.

S&F for prepainted galvalume aluminum zinc chrome coating corrugated sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed.

S&F for prepainted galvalume aluminum zinc chrome coating plain sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings jointed and fixed to wall complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings laid in trenches or in floors complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) half round pipes single socketed in any length with rubber rings jointed and fixed to wall complete all as specified and directed.

M&L for 10 to 12 mm thick heavy duty endura tiles 400x400 mm of any pattern decided by Engr in charge as in pavings laid over 20 mm thick screed bed 1:4 laid over 25 mm thick PCC 1:2:4 as in levelling and make a slope as directed and jointed including dismantling of existing tiles with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. Make Johnson/kajaria/somany

S&F Stainless steel railing 32 mm dia hollow section grade SS-304 fixing, cutting ending , moulding curving as in stair and parapet baluster and hand rails including fixing brackets and bolts complete all as specified and directed.

S&F Stainless steel railing 25 mm dia hollow section grade SS-304 fixing, cutting ending , moulding curving as in baluster and hand rails complete all as specified and directed.

M&L for glazed ceramic coloured tiles/ wall cladding tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick over 10 mm thick rendering 1:4 CM set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 15mm bore complete all as specified and directed.

M&L for preparation of new or old plastered wall surfaces and applying 1.5 mm thick putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resistance primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI)) of approved colour complete all as specified and directed.

Complete removal of existing treatment and removal of rubbish outside defence land complete all as specified and directed.

S&F (in repairs) Cascade, vitreous china wash down water closet ,wall mounted Couple closet Bowl-WC with UF seat cover, hinges, accessories set, size 660 x 375 x 760mm, P trap including Cistern with fittings complete all as specified and directed. (Make:Hindware (MARIO) Cat No: 20084 & Cist: 21052 or equivalent in CERA/ Parryware/ Jaquar).

S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, chromium plated with cup complete all a specified and directed. (Make: Jaquar Cat No: ARI-39053 or equivalent in JAINKO, CERA, SHAKTI, PRAYAG)

S&F chromium plated brass bib tap fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed (Make: Jaquar Cat No: ARI-39037 or equivalent in JAINKO, CERA, SHAKTI, PRAYAG).

S&F PVC SWR 75 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC SWR bends or Tee 75 mm bore complete all as specified and directed.

S&F PVC SWR bends or Tee 110 mm bore complete all as specified and directed.

S&F PVC SWR vent cowl 110 mm bore complete all as specified and directed.

M&L for PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching, coping, bedding etc complete all as specified and directed.

S&F hand shower (health faucet) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. (Make : Jaquar Cat No. ALD-573 or equivalent in JAINKO, CERA, SHAKTI, PRAYAG)

S&F Aluminium composite panel (ACP) sheets of 6 mm thick fixed with frame made out of MS tubes of size 38mmx38mmx16guage. The grid size shall not exc 600mmx600mm. The frame shall be painted with two coats of synthetic enamel paint with primer. The ACP 6mm sheet fixed with SS screws and jointed shall be finished with silicon complete all as specified and directed.

M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63 mm double rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed.(Make Echon/ Rajshree or equivalent in ACCUCEL, POLYINE, ECOCELL)

Providing and fixing 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum shiuld be 100% lead free door complete all as specified and directed. (Make Echon Cat No LPD-I 1 or equivalent in ACCUCEL, POLYINE, ECOCELL)

S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed.

S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, hinges type B-21 100mm long - 02 Nos, suitable handle - 01 Nos etc complete all as specified and directed.

Supply only 5.0mm thick heat absorbing/Reflective glass of any size complete all as specified and directed.

S&F stainless steel drapery rod (curtain rod) of 25mm dia, fancy type, complete all as specified and directed.

S&F stainless steel decorative type end bracket and side cups suitable for curtain rods 25mm dia fixed with screws complete all as specified and directed.

S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. (Make: Jaquar Cat No. ALD-8058 or equivalent in Kohler, CERA)

Removing of demolished material /debries out of defence land minimum 3.00cum each load as directed.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as switch, sockets, ceiling rose, pendent holders, regulators, light fittings and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requirement for the following Note:if Cutting & chashing required, it shall be measured/paid under relevant items. Make:-Polycab/Havells/RR

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 98 here in before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

S&F of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame all as specified. Make:-Indoasian/ Havells/ Legrand

S&F of modular switch 16 A SP one way 240 volts all as specified. Make:-Indoasian/ Havells/ Legrand

S&F modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts all as specified. Make:-Indoasian/ Havells/ Legrand

S & F of modular socket outlet 16 A-6 pin combined 240 volts all as specified. Make:-Indoasian/ Havells /Legrand

S&F plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts including taking out old Unsv metal clads for credit complete all as specified. Make:-Legrand/ Havells/ Indoasian

Disconnecting mains connection and taking out old sub main wiring two single core 4/6 sq mm and one single core 4/6 sq mm aluminum conductor cable from the concealed conduit from the wall or ceiling and making good to surface.

M&L for submain wiring with FRLS PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). Make:-Polycab/Havells/RR

M&L for submain wiring with FRLS PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 10 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 10 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). Make:-Polycab/Havells/RR

S&F in replacement of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar including MCBs for credit complete all as specified & directed.

S&F factory made, sheet steel distribution boards, SPN 12 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar.

S&F in replacement of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :- Note : Make of the MCB should be the same as that of DB

MCB SP 6 to 32 Amps Make:-Indoasian/ Havells/ Legrand

MCB SP 40-63 Amps Make:-Indoasian/ Havells/ Legrand

MCB SPN 40-63 Amps Make:-Indoasian/ Havells/ Legrand

S&F in replacement LED fitting surface mounted 36 watt ( 2X2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable all as specified make CG Cat Part No LCTLSNE-36-FO-CDL(2X2) Or equivalent in Havells/philips

S&F LED Tube Light of 18 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make-CG cat part no.-LCTL-18-CDL, or equivalent in havells/philips.

M&L for taking down of ceiling fan of any size and servicing complete, greasing, painting, changing of ball bearing of any type, Copper rewinding (if required) and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

M&L for making ceiling fan hook point including 1:3:6 RCC work alongwith hooks complete all as specified & directed

S&F in addition of ceiling fan 5 star rating (Opal white) economy range high speed having full copper motor & ribbed aluminium blades for higher air delivery, power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arrangement to hanging of fan to ceiling with proper hook nut bolts all as specified & directed. Make:CG AURA PLUS-5 STAR 1200mm or equivalent in HAVELLS, USHA .

S&F stepped type electronic fan regulator 1M Modular type for fixing in suitable modular frame complete all as specified & directed. Make: Anchor roma/ Indoasian /Havells

Disconnecting & dismantling old unsv XPLE, aluminium conductor of cross sectional area 35 sqmm for taking credit complete all as specified and directed.

Supply, laying of cable XLPE, insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 35 sq mm 4 core complete fixed to wall, ceiling with proper clamps all as specified and as directed at site by the Engr-in-charge.

S&F in replacement of factory made load line DBs double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN 100 Amp,25KA as incomer & MCB SP 32/40 Amp of 10 KA capacity of 12 Nos as outgoing including taking down of old unsv loadline DB complete with MCCBs for credit complete all as specified.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 100 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc.complete all as specified and directed by Engr-in-Charge Make : Legrands cat part No 4202 17 or equivalent Make in Schneider/L&T

BEHAL TRADERS

MRITUNJYA ASSOCIATES