Andaman Nicobar

Active

Works

Civil Works - Buildings

Repair and renovation of Directorate Building of AH and VS, Haddo under Haddo Section, SD-IV, SVPND, APWD, Sri Vijaya Puram

Chief Engineer Andaman Public Works Department (APWD)

Sri Vijaya Puram | South Andamans, Andaman And Nicobar Islands

Amount: ₹87.5 LCloses: 21 Oct 2026

Timeline

Published6 Oct 2026
Submission Opens8 Oct 2026
Closes21 Oct 2026
Bid Opening22 Oct 2026

Tender Value

₹87.5 L

EMD Value

₹1.8 L

Closing Date

21 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

EE, SVPND, APWD, Sri Vijaya Puram

Address

EE, SVPND, APWD, Sri Vijaya Puram

Work Description

Repair and renovation of Directorate Building of AH and VS, Haddo under Haddo Section, SD-IV, SVPND, APWD, Sri Vijaya Puram

Tender Information

Tender ID

2026_APWD_25048_1

Reference Number

NIT No. 70/EE/SVPND/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

240 days

Location

Sri Vijaya Puram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender documents

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScan copy of EMD (.pdf)

RequiredScan Copy of Work Experience Certificate (.pdf)

RequiredScan copy of Certificate of valid Registration of GST. (.pdf)

RequiredScan copy of 10 (Ten) years Financial Audited Statement of account from a Chartered Accountant (.pdf)

RequiredScan copy of list of all ongoing works in Form C-3 as specified at Page No.34 of the tender document (.pdf)

RequiredScan copy of Undertaking in terms of para No.36 of Additional Conditions as specified at Page No.34 (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1.8 L

Important Dates

Last Activity

6 Oct 2026

Published

6 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

6 Oct 2026

Download Ends

21 Oct 2026

Submission Starts

8 Oct 2026

Clarification Period

6 Oct 2026 - 19 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (71 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.	30.15	sqm	1,057.14	₹31,872.77
2Centering and shuttering including strutting, propping etc. and removal of form for
2.1	Columns, Pillars, Piers, Abutments, Posts and Struts	97.7	sqm	1,356.25	₹1,32,505.63
3	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	34.45	sqm	1,788.88	₹61,626.92
4	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.	5	each	1,586.99	₹7,934.95
5Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds
5.1	Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).	153	sqm	15,341.86	₹23,47,304.58
5.2	Fixed window/ ventilator without mullion /transom. Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre)	1.65	sqm	11,635.63	₹19,198.79
5.3	Fixed window/ ventilator without mullion /transom. Using R4 series with frame (64 mm & above) x (50 mm & above). (Height above 2.5 metre)	10.8	sqm	8,511.44	₹91,923.55
5.4	Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre).	78.55	sqm	17,630.05	₹13,84,840.43

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.08 MB

Work Item Documents

TenderDocNIT70.pdf

Tender Documents • 1.20 MB

Instructions-to-bidders.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

30.15

sqm

1,057.14

₹31,872.77

2Centering and shuttering including strutting, propping etc. and removal of form for

2.1

Columns, Pillars, Piers, Abutments, Posts and Struts

97.7

sqm

1,356.25

₹1,32,505.63

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

34.45

sqm

1,788.88

₹61,626.92

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

each

1,586.99

₹7,934.95

5Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds

5.1

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).

153

sqm

15,341.86

₹23,47,304.58

5.2

Fixed window/ ventilator without mullion /transom. Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre)

1.65

sqm

11,635.63

₹19,198.79

5.3

Fixed window/ ventilator without mullion /transom. Using R4 series with frame (64 mm & above) x (50 mm & above). (Height above 2.5 metre)

10.8

sqm

8,511.44

₹91,923.55

5.4

Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre).

78.55

sqm

17,630.05

₹13,84,840.43