133/EDC(G)/2023-24

Amount

All these below items/materials from S.N. 1.01 to 1.24 will be given and errected by the contractor on his own cost as per estimate/Resspo Norms.

F BRACKET

V type X-ARM HOLDING CLAMP

GAURDING X ARM HOLDING CLAMP

T OFF DROPPER HOLDING CLAMP

LT CLAMP for I HOOK

TELLESS UNIT 500 Amp. With DB and Gate (4 CKT)

L-PIECE COPPER

I hook

SUSPENSION CLAMP

DEAD END CLAMP

DB BOX 3 PHASE

DB BOX CLAMP

STAY CLAMP

NUT and BOLT off size

PEARSING CONNECTOR

TRANSFORMER MOBLIE TROLLY WITH ALL FITTING as per estimate/resspo norms

VACCUM INTRUPTER FOR STEL MEC

CHARGING GEAR

TRIPPING COIL

CLOSING COIL

AL LUGS (1X400 SQMM)

PG CLAMP

Stone Pad

Loading, Unloading and safe cartage of the following materials (S.N. 2.01 to 2.47) from Electricity Store Centre, Gonda to the work site/dump site (Distance up to 70 km)

PCC POLE 8.5 MTR

PCC POLE 9 MTR

STP POLE 11 MTR

25 KVA T/F

63 KVA T/F

100 KVA T/F

250/400 KVA T/F

11 KV V Type X-ARM

RUBBUR MAT

CJ KIT 3X70 O/D

CJ KIT 3X185 O/D

CJ KIT 3X185 I/D

CJ KIT 3X300 I/D

CJ KIT 3X300 O/D

CONTROL CABLE 4X2.55 SQMM (IN MTR)

CONTROL CABLE 2X2.5 SQMM (IN MTR)

33 KV CONTROL PANAL

BATTARY SET 24V

BATTARY CHARGER 24V

LIGHTING ARRESTOR

33 KV VCB

GARUDING X-ARM

T OFF CHANNEL

DROPPER ANGLE

TOP CHANNEL

SS BASS

11 PIN INSULATOR

11 DISK INSULATOR

ACSR WEASEL CONDUCTOR

LT XLPE Cable Al. 1X240 sq.mm

LT XLPE Cable Al. 1X400 sq.mm

LT XLPE Cable 1X630 sq.mm

XLPE Cable Al. 3X70 sq.mm

XLPE 3X185

XLPE 3X300

ABC 1X25+1X16

STAY SET

GI WIRE 6 SWG

STAY WIRE 7/10 SWG

STAY INSULATOR

EARTHING COMPLETE

EARTHING ROAD

Other Material

Erection of single PCC/ST Poles (8.5/9/11 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site (All decentralize material shall be given by the contractor on his own cost.)

Erection of sectional double pole sectional PCC/STP pole (8.5/9/11 mtr long) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. (All decentralize material shall be given by the contractor on his own cost.)

Earthing with complete fitting

Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost.

Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)

Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories.

25 KVA T/F

63 KVA T/F

100 KVA T/F

250/400 KVA T/F

Laying, Stringing & Sagging of ABC Cable up to proper sag for the following size cable as per estimate/resspo norms

ABC 1X25+1X16

Laying Stringing sagging & Binding of All size XLPE cable wher is required as per estimate/Resspo norms.

LT XLPE Cable Al. 1X240 sq.mm

LT XLPE Cable Al. 1X400 sq.mm

LT XLPE Cable 1X630 sq.mm

XLPE Cable Al. 3X70 sq.mm

XLPE 3X185

XLPE 3X300

Installtion/Errection/Laying/stringing of the following items as per estimate/resspo norms.

Diffent size Controll Cable

33/11 KV different size Jointing kit

33 KV CONTROL PANAL

BATTARY SET 24V

BATTARY CHARGER 24V

LIGHTING ARRESTOR

33 KV VCB

11 PIN INSULATOR

11 DISK INSULATOR

TELLESS UNIT 500 Amp. With DB and Gate (4 CKT)

DB BOX 3 PHASE WITH COMPLETE FITTING

VACCUM INTRUPTER FOR STEL MEC

CHARGING GEAR

TRIPPING COIL

CLOSING COIL

AL LUGS (1X400 SQMM)

PG CLAMP

RUBBUR MAT

Gaurding of H.T./L.T. line with complete fittings as per estimate/resspo norms (All the decentralize material shall be given by the contractor)

Boaring/Chemical type Pipe Earthing (with G.I. strip connection) as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Repairing of Plinth including dismounting/disconnection of T/F from system as well as mounting/reconnection to the system after repairing as per Estimate/Resspo Norms .(All the required material shall be given by contractor on his own cost.)

Wiremesh fencing with 1 door arrangement including grouting of footings and proper fxing as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

CONSTRUCTION OF PLINTH WITH FENCING with gate as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Cutting of tree branches for cleaning route of 11 KV/LT line at the work site (25 mtr.= 1 Job)

Carrage of scrap/conductor from site to store

Dismentaling old material

Dismentaling old line

COSTRUCTION OF TRENCH OF SIZE 0.45X0.75 (IN MTR)

Constructio of Structure/Plinth for VCB as per estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Construction of CT STRUCTURE AND PLINTH as per estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Consstruction of LA STRUCTURE AND PLINTH as per estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

S.R. Infraconstruction Pvt Ltd