REPAIRS TO HARD BED WITH PLY TOP ALL TYPES OF CLASS ROOM DESK AND BENCH REPAIRS RE WEAVING TO G I CHARPOY CHAIR VERANDAH REPAIR PAINTING TO ALL TYPES OF CHAIR REPAIR REPLACEMENT UN SERVICEABLE COMPONENTS OF WOODEN CHAIR AA TYPES AND RE CANIN

Amount

M&L for Removing old unserviceable head rest of bed ply wood top and S & F new head rest exterior grade and fixed as per drg No FD-246.

M&L for Removing old unserviceable foot rest of bed ply wood top and S & F new foot rest exterior grade and fixed as per drg No FD-246.

Removing of unserviceable long rail of hard bed ply top and S & F first class hardwood long rail all as per drawing & as directed. DRG NO FD- 246.

Removing of unserviceable short rail of hard bed ply top and S & F first class hardwood short rail all as per drawing & as directed. DRG NO FD- 246.

M&L for Removing old unserviceable ply wood of bed ply wood top and S & F new ply wood 6’ x 3’ and 12 mm thickness BWR grade and fixed as per drg No FD-246.

M&L for MS clamps of size 25 x 3 mm thick, 150 mm long made to ‘L’ shape and screwed to legs and frame including 02 coats of synthetic enamel paint over a coat of red oxide primer. Drg No FD-246

M&L for Dismantling / removing the old unserviceable MS tube support frame from DESK class room and other furniture items and S&F 25mm dia, 1.6 mm thick MS tube cut into size and fixing the same by means of gas welding all as directed including painting the frame with two coats of synthetic enamel paint over a coat of red oxide primer all a directed. Drg No FD-107 Make: Jindal/ Sail

M&L for Dismantling / removing the old unserviceable bottom plank and S&F new plank made out of first class hard wood (Teak wood) cut and made to size 255x1220 x25mm thick and fixing in foam with/without back including suitable bolt nuts and polishing the replaced plank all as directed and specified in the drawing. Drg No FD-77, FD-78 (M), F-2

M&L for Dismantling / removing the old unserviceable back plank and S&F new plank made out of first class hard wood (Teak wood) cut and made to size 150x1220 x 19mm thick and fixing in foam with back including suitable bolt nuts and polishing the replaced plank all as directed and specified in the drawing. Drg No FD-78 (M), F-2

M&L for Dismantling / removing the old unserviceable top / bottom support cover, supply and fix new top / bottom support cover made out of pre-laminated particle board exterior grade of 19 mm thick, one side teak wood finish and other side white lamination cut and made into size of 550x1220mm including 6mm thick teak wood beading (edging) and fixing in "DESK" class room including polishing the teak wood part and painting the MS frame with two coats of synthetic enamel paint over the painted surface after carrying out proper preparation work all as directed. Drg No FD-107

All same as item No 10 above but for side cover and centre support of size 550x200x19 mm thick all as directed except painting. Drg No FD-107.

M&L for Supply and replace hard rubber / PVC bush of size 32mm to the legs of the Desk, Foam with back all as directed. DRG NO FD-78/107

M&L for Dismantling/removing the old unserviceable mirror and supply and fix new mirror of suitable size 5mm thick for ladies dressing table all as directed. DRG NO: FD-378

M&L for Dismantling/removing the old unserviceable mirror supply and fix new mirror of suitable size 5mm thick for gents dressing table all as directed. DRG NO: FD-372

M&L for Removing from existing GI charpoy, broken unserviceable GI elbow 32 mm 3 way carefully without damaging the threads, supply and fix new GI elbow 32 mm 3 way (ISI Marked) to GI charpoy complete all as directed. DRG NO FD- 220 Note: If any thread in leg, short rail or long rail found damaged, the same shall be rethreaded and the cost of the same is deemed to be included in the quoted rate.

M&L for Removing from existing GI charpoy, broken unserviceable check nut 32 mm carefully without damaging the threads and supply and fix new check nut 32mm dia to the GI charpoy complete all as directed. DRG NO FD- 220.

M&L for Cutting out from existing GI charpoy, serviceable part of the unserviceable long rail to convert it in to short rail made out of 32mm GI pipe including threading as required & assembling all as directed. DRG NO FD- 220.

M&L for Cutting out from existing GI charpoy, serviceable part of the unserviceable short rail to convert it in to legs made out of 32mm GI pipe including threading as required and plugging one side of the leg by welding suitable MS flat bottom plug and assembling the GI charpoy all as directed DRG NO FD- 220. Note : cost of Unserviceable leg shall be measured under Sch of credit.

M&L for New long rail made of 32 mm dia GI pipe Medium grade 1.80 m long ISI Marked including threading both sides as required and assembling the GI charpoy all as directed. DRG NO FD-220. Note : Cost of removal of long rail shall be measured under item No. 19

M&L for New short rail made of 32 mm dia GI pipe Medium grade 0.9 m long ISI Marked including threading both sides as required and assembling the GI charpoy all as directed. DRG NO FD-220. Note : Cost of removal of long rail shall be measured under item No. 20

M&L for Removing old unserviceable nylon newar from existing GI charpoy and retaping with new nylon newar 50mm wide, phirozi blue colour closely and tightly woven all as directed. DRG NO FD-220.

M&L for Removing old unserviceable ply wood of charpoy G I ply top and S & F new ply wood 6’ x 3’ and 12 mm thickness BWR grade and fixed as per drg No FD-220.

M&L for M S Flat of size 25 x 12 mm thick, 900mm long welded between two long rail weld with G I charpoy frame including 02 coats of synthetic enamel paint over a coat of red oxide primer all as directed. Drg No FD-220

M&L for Recanning of chair verandah with not less than 4mm wide slightly round white plastic cane including painting the chair with one coat of white enamel paint after preparation of old surface all as directed . DRG NO FD-19(M).

M&L for Supply and replace hard rubber / PVC bush of size not less than 20mm fixed with copper screw & washer to the legs of the chairs all as directed. DRG NO FD-19 (M)

M&L for Removing and providing spot welding / continuous welding where ever required for repairing Joints, broken MS conduit pipe of frame of chair tubular steel/ chair varanda etc. Drg No: FD-19(M)

M & L for removing old unserviceable teak wood seat frame from existing chair Tubular steel type 'A' and S&F new teak wood seat frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel black paint over a coat of pink primer and painting the chair fully with a coat of synthetic enamel paint including preparation of surface all as directed. FD- 75(M).

M & L for removing old unserviceable teak wood back frame from existing chair Tubular steel type 'A' and S&F new teak wood back frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel paint over a coat of pink primer including preparation of surface all as directed. DRG NO FD-75(M).

M & L for removing old unserviceable teak wood arm rest of chair tubular steel type 'A' and S&F new teak wood hand rest fixing with suitable screws and painting with two coats of black synthetic enamel paint after applying pink primer including preparation of the surface.DRG NO FD-75(M).

M & L for removing old unserviceable teak wood seat frame from existing chair Tubular steel type 'B' and S&F new teak wood seat frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel black paint over a coat of pink primer and painting the chair fully with a coat of synthetic enamel paint including preparation of surface all as directed. FD- 75(M).

M & L for removing old unserviceable teak wood back frame from existing chair Tubular steel type 'B' and S&F new teak wood back frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel paint over a coat of pink primer including preparation of surface all as directed. DRG NO FD-75(M).

Dismantling/removing old unserviceable hand rest for Chair CBA special with hand rest Squire type and S&F new hand rest of size 19x600x300mm made out of prelaminated particle board "L" shape with PVC beading around the particle board and MS Tubular pipe of size 700x15mm "L" shape with clam screw and along with neessary welding squire type pipe and painting with two coats of synethic enamel paint over a coat of primer after carrying out proper preperation work all as directed Drg No FD-120

Dismantling/removing old unserviceable hand rest for Chair CBA special with hand rest Tubler type and S&F new hand rest of size 19x600x300mm made out of prelaminated particle board "L" shape with PVC beading around the particle board with nut and bolts alongwith necessary welding tubular pipe and painging with two coats of synethic enamel paint over a coat of primer after carrying out proper preperation work all as directed Drg No FD-260

M&L for Repairing the chair dining made out of 1st class Hardwood (Teak/Sissoo) best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed. DRG NO: FD-228, FD-279

Front Leg

Rear Leg

Side rail / Front rail and rear rail of seat Frame

Back Rest

Stiffener

M&L for Repairing the chair easy made out of 1st class hardwood (teak/Sissoo) best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed.DRG NO: FD-229

Front Leg

Rear Leg

Front/back/side rails

Top bottom and side rails of Back frame.

M&L for Repairing the chair writing made out of 1st class Hardwood (Teak/Sissoo) best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed. DRG NO: FD- 280

Front Leg

Rear Leg

Side rail / Front rail / Rear rail of seat Frame

Back Rest

M&L for Recanning to chairs wooden all type, stool dressing, CB etc with best quality cane not less than 1.8 mm wide slightly round (Godrej pattern) and 0.40 mm thickness of white colour, including taking down old damaged cane. DRG NO: FD-56, FD-228, FD-229, FD-279, FD-280, FD-120

M/s PRATAP VIJAYSINGHRAO DESAI

LAKSHMI DEVELOPERS