CA NO. GE AF NO.1/GUR-31/2025-26 PERIODICAL SERVICES BY USING SMART PERIODICAL METHODOLOGY IN 27 ED AND 31MCU AT AF STN PALAM UNDER GE (AF) GURGAON NO 1

Amount

Schedule-A (B/R Work)

M&L for preparation of plastered or un plastered old decorated surfaces of wallsincluding wall paper by Vacuum based sanding machine all as specified and filling cracks/hole by applying wall care putty (multi purpose mixer/shad will be used for uniform and proper mixing of putty) and applying one coat distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary all as specified & directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

All as above but two coats of OBD over 1 to 2mm thick wall care putty and primer as required after complete removal of existing treatment/newely plastered surface all as specified and directed by Engr-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

all as per Sl Item No-1 but on Ceiling surfaces. (Note:-Work will be strictly executed by mechnised means/tools as required for smart periodical services)

M&L for preparation of plastered or un plastered old decorated surfaces of walls including cornices plasters by brooming down or steel wire brushes scraping down,smoke soots etc and applying one coat of white wash on walls all as specified & directed by Engineer-in-Charge.

All as per item No 4 above but on ceiling surfaces

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of old painted Concrete/plastered surface (Kerb Stone) of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered wall surfaces complete all as specified, removal of nails etc & filling cracks/hole with putty and apply one coat of all weather exterior emulsion paint 100% acrylic of approved make, white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.

M&L for 15 mm thick rendering in cement mortar 1:4 by using manufacture/washed plaster sand on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 10 mm thick rendering in cement mortar 1:3 by using manufacture/washed plaster sand on fair faces of concrete/ceiling surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 15 mm thick rendering in cement mortar 1:6 by using manufacture/washed plaster sand on other than fair faces of brick or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation for newly plastered surface of ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation for newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of new plastered wall surfaces and applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of all weather exterior emulsion paint 100% acrilic of approved make, white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.

S&F in repairs 25mm dia MS powder coated curtain rods including cutting in sizes and fixing in position complete all as specified and as directed by Engr-in-Charge

S&F in repair Stainless Steel wall bracket suitable for 25mm dia curtain rod including drilling holes and fixing with GI screw and PVC rawl plug of suitable size complete all as specified and as directed.

S&F in repair PVC decorated coloured end knob suitable for 25mm dia curtain rod including fixing in position complete all as specified and as directed.

Dismantling of floor, hearth, or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

S & F vitrified tiles tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes all as specified .

M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Dismaintling of Stone slabs and tiles of any description or thickness in floor orwall, aprons and laid badded and pointed in any mortar. etc

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished, rounded and chamfered ) in steps, jambs, pillars, window- cills, cooking platforms in full length upto 2.50 mtr and laid over and including 10 to 155mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required complete all as specified and as directed.

M&L for 20-22 mm thick machine cut Kota stone slab of size 550mm x 550mm in flooring over cement screed bed 18-20mm thick in CM 1:4 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing in repairs, complete all as directed by Engr-in-Charge.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor.

M&L for sand filling under floors or in foundations including watering and consolidation for 50mm thick.

M&L for 60mm thick Machine pressed precast concrete Glazed inter locking paver block M-35 Gde any shape and size with white cement and pigment conforming to IS 15658-2006 over sand cushioning as specified and as directed.

Fixing only old interlocking paver block obtained from dismantled, over sand Cushioning as specified and as directed.

M&L in repair for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed Glazed colour, Set and Jointed in Neat Cement Slurry with white Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and as directed.

Dismantling of wall and ceiling and boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness incl cover fillets.

M&L for suspended false ceiling consisting of suitable GI sections of ‘T’ Angle & FI as per Std engineering practices with ‘E’ board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc and all as per approved and directed

M&L for providing and fixing false ceiling at all heights with fully perforated 12mm thick microtegular edged or 10mm thick square edged glass fibre reinforced Gypsum false ceiling tiles ofsize 595x595mm of approved texture,designand pattern having moisture content less than 2% humidity resistance of 99% ,NRCO 0.50 to0.75 as per IS 8225:1987,Noncombustible as per BS 476(part-4)-1970 and light reflectance of 85%(minimum) to laid in true horizontal level suspended on locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick(galvanised @120mm grams per sqm including both sides ) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross T of size 15x32mm of lenght 600mmto from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm)ie 50mm long,8mm outerdiameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws.The work shall be carried out as per specifications,drawing and as per directionsof the Engineer-in-charge.

Dismantling of existing loose grit wash panel of any description in different level including taking down plaster and raking out joint and roughening the old surface to receive new finishes including skefolding all as specified and as directed.

Material and Labour for Washed stone grit plaster on exterior walls on two layers ,under layer 12 mm cement plastered 1:4 (1 cement : 4 coarse sand) using grey cement in place of ordinary cement in the top layer of the item of washed stone grit plaster , furrolowing he undre layer with scratching tools , applying cement slurry on the under layer @ 3 kg of cement per sqm, top layer 15 mm in cement mortar 1:1/2:2( 1 cement:1/2 coarse sand: stone chipping 10 mm nominal size) in panel with groove all around as per apprved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and as directed.

M&L for fixing wooden bead for grooves in (squre hollow) not less than 15 mm wide and 15mm thick and removing after finishing the grit wash

Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L Cutting and grinding mirror polishing old kota stone flooring including applying cement slurry to fill the existing joints, complete all as specified and directed by Engr-in-Charge

S&F of oil resistance , Re-positionable and eco-friendly strain resistance colour wall paper including fixing with adhesive and cutting to required shape compplete in all respect to the satisfaction of Engr-in-charge and also adhere to below specification (a) All wall paper to be erected from floor to the bottom of the ceiling or as specified (b) All opening for the cutout for ducting/raceways/ cables etc, in the partition to be closed and made air tight (c) Disposing waste material from the site

Removing of old debris obtained from excavation/demolition building material to a distance exc 5 Km but n exc 10 Km and deposited out side the MD land. Note :- Searching of Place of Disposal out side the MD Land will be the responsibility of Contractor and rate of any distance shall be included in quoted unit rate.

Note :- The amount of Rs 10155/- against Schedule of Credit on Srl Page 139 shall be deducted from the total amount quoted against Sch 'A'

JAIPAL AND BROTHERS (BID ID -3323479)

M/S Parshant Associates (BID ID -3323465)

M/S RK Builders (BID ID -3323269)

SM CONSTRUCTION COMPANY (BID ID -3332061)

R. S. Associates (BID ID -3317028)

DR Buildcon (BID ID -3332080)