33-11 KV sub -Station Khandauli and associated 33 KV and 11 KV Lines in Agra District

Amount

SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33 KV VCB 800A, 750MVA with Steel structure

Control Panel I/C for 33 KV single T/F

Control Panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV 1 Phase PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule

Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule

G.I. Structure for Line & Bus Isolator. with Plinth & Foundation

33 KV Post Insulator

G.I. Structure for Post Insulator with Plinth & Foundation

G.I. Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

G.I. CT Steel structure with Plinth & Foundation

G.I. Structure for P T with Plinth & Foundation

33 KV Fuse Set

G.I. Structure for fuse Set with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet.

Control Cable 4 × 2.5 Sq.mm.

Control Cable 2 × 2.5 Sq.mm.

L.T. Cable Al. 3.5 × 70 Sq.mm .

Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Outdoor Equipment (Earth Mat)

(ii) Indoor Equipment (Earth Mat)

Pipe Earthing of Power Transformer by way of boring and lowering of "B" class G.I. pipe 50 mm dia. into the ground up to the water level to the lower end of which a solid copper con approx 9 inches long and 750 gram in weight provided and screwed in connecting and bringing out continuos copper wire 8 SWG from the cone to the ground surface where it will be bolted to the G.I. Earth Strip for Transformer neutral connction. The earth Strip will be welded to the G.I. pipe. The work also includes cap and clamp for pouring water, the cost of all material with all labour and T&P etc. complete in all respect.

Chemical Pipe Earthing

Alluminium Paint for painting of Sub-Station Structure & equipment.

Red Oxide Paint for painting of Sub-Station Structure & equipment.

33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar

Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar

CONDUCTOR A.C.S.R. Dog conductor for switch yard

Polymeric 33 KV Pin Insulator

Fabrication and grouting of G.I. Channel 100x50x6 mm. in L shape & in proper size and alignment to provide support for the two separate Earthing strips for power transformer neutral including supply & fixing of two nos. flexible copper bonds for neutral Earthing. The work also includes painting of G.I. Channel with two coats of aluminium paint.

Fabrication and erection of cable support made of two pieces of G.I. 65x65x6 mm. 3.00mtr. long, joined to each other by means of 5 Nos. M.S. flat 50x6 mm. pieces of size 150 mm. long each by welding at equal intervals as per drawing and grouting in a block of size 300x300x700 mm complete with two coats of Aluminum paint. This includes providing of four nos. G.I. clamp made of G.I. flat for holding the cable including Nuts & bolts.

PLINTH OF 5 MVA, 33/11 KV TRANSFORMERS : Construction of plinth of size 3.46x4.46 Mtr. for 5 MVA Transformers having 0.5 Mtr. below ground level and 0.5 Mtr. above ground level. The work also includes laying of 2 Nos. 3.46 Mtrs. long each rail pieces complete with cutting welding & proper fitting etc. The plinth will be made as per drawing and shall be plastered/finished on top and sides of the plinth with 6" RCC SLAB.

Plinth & Foundation of 33 KV VCB

11 KV Cable laying Including cost of sand and Bricks

Cost of Furniture for control room (Steel table, chair, branch & rack) : (Office Chair with arms made of Wooden with proper cane seat & back. - 2 no, Office Table having size 1520 x 900 x 760 mm. made of Steel Pipe in square shape having two No. Drawers & 10 mm. Top Board with Sun mica. - 2 No., Sitting Bench made of Steel Pipe of size 183 x 450 mm. with three seats with Sun mica - 1 No., Stool of size 450 x 300 x 455 mm. having sitting top of 12 mm. Board with sun mica. - 2 No., Office rack made of Steel Pipe & M.S. Sheet of size 750 x 900 x 400mm. - 1 No Cost of Fire Fighting equipment with stand complete : Fire extinguisher CO2 type 5.0 Kg. capacity I.S.I. mark. - 1 No, Fire extinguisher CO2 type 4.5 Kg. capacity I.S.I. mark. - 1 No., Fire Bucket stand size 1500x1200mm. having M.S. Channel 100x50 mm base with cross triangular bracing of M.S. Angle 50x50x6 mm and base of 100x50 mm. Channel 600 mm long having pipe 25 mm and boxing pipe of size 32 mm. including welded with M.S. hooks rigidly and nicely painted with one coat of red oxide primer & two coat of red enamel paint of best quality. - 1 No., Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia with bar handle for hanging of bucket including nicely painted in inner portion with one coat of red oxide primer & two coat of channel white paint & outer side with one coat of red oxide primer & two coat of post office red colour & written work “AAG” in Hindi. - 4 No., Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark. - 4 No., Cost of Boards : Making and fixing of protection Board alongwith all accessories complete made of sunmica 10 mm sheet size 45×60 Cm. - 2 Job., Supply and fixing of sub-station name board made of M.S. Angle 50×50×6 mm and S.P. Sheet of 18 SWG including painting and writing. - 1 Job.

Sundry Stores (connecting clamps, etc.)

33 KV LINE :- 9 Mtr. Long PCC Pole

11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

M+6 G.I. Tower 19.300 Mtr. Long

ACSR DOG CONDUCTOR (9.445 X 3 + 3% Sag and Jumpering)

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

Polymeric 33 KV Pin Insulators

33 KV Disc Fitting B & S Type – 70 KN

33 KV Polymeric Disc Insulators B&S Type 70 KN

33 KV 'V' Type X-arm (G.I. Channel 100 x 50 x 6 mm.)

33 KV Cross arm holding clamp with nuts, bolts & washers

" F " bracket for 33 KV line

" E " bracket for 33 KV line

Armour rod with ferrule for Dog conductor

G.I. Angle 65x65x6 mm, 4300 mm long for bracing with clamps

G.I. Top Channel 125x65 mm, 3200 mm long with 2 nos clamps

G.I. Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps

P.G. clamps for Reccoon/Dog

G.I. Nut, bolt with washer

G.I. Guarding Angle 65x65x6x2600 mm

G.I. Guarding Angle 65x65x6x3600 mm

Holding clamp for guarding angle with nuts & bolts

G.I. Barbed wire

G.I. Wire No. 6 SWG

G.I. Wire No. 8 SWG

G.I. Wire No. 16 SWG

Stone Pad (300x300x75 mm.)

33 KV Number plate with clamp with nuts, & bolts

33 KV Danger board with clamp with nuts, & bolts

Alluminium binding wire- 6 SWG

Alluminium paint

Red oxide paint

Turn Buckle

Eye bolt 12 x 110 mm

33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable

Clamps for fixing of cable and cable box

Supply of HDPE Pipe 160 mm dia PN-6, PE-100 Grade UV Stabilized

Clamps for holding of 160 mm dia H.D.P.E. Pipe

Earthing of Pole by M.S. earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc.

33 KV Stay Set 20 x 1800 mm

33 KV Stay clamp

33 KV Stay Insulator

Stay wire 7/8 SWG

Concreting of 33 KV Stay Rod 20x1800 mm.

Grouting of P.C.C. Pole 9.0 Mtr. long

Concreting of S.T. Pole 11.0 Mtr. long

Concreting of S.T. Pole 13.0 Mtr. long

Concreting of Tower with M-20 Grade concrete for foundation with shuttering and making of plinth

Tree cutting compensation

Digging of trench and Laying of 3x300 sq.mm. cable in H.D.P.E Pipe 160 mm dia below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job

Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Railway Track or as per drawing approved by railway/Highway by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.

Hoisting/Laying of 33 KV, 3x300 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure

Hoisting/Hanging of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Road restoration charges for pucca road crossing/footpath/Kachha road (LS)

Cable marker

Wooden Bushes

Tee Channel 125 x 65 x 2240 mm. x 1 No. with Clamp, nuts & bolts

11 KV LINE :- M+6 G.I. Tower 19.300 Mtr. Long

8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

ACSR Raccon Conductor (7.012x3+3% Sag and Jumpering = 21.668 Kms.)

11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable

LT Al. XLPE Insulated cable 1x50 Sq.mm

LT Al. XLPE Insulated cable 3.5x70 Sq.mm

11 KV TPMO with fixing clamp complete

11 KV Fuse set

11 KV Disc fitting B&S Type 45 KN

Polymeric 11 KV Pin Insulator

11 KV Polymeric Disc Insulator B&S type (45 KN)

MS Top Channe 100x50x6mm, 2240mm with clamp, bolts ,nuts & washers

MS Dropper Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers ( For Fuse set)

11 KV V-Type X-arm

MS Angle Iron 65x65x6mm, 2700mm Long bracing Complete with Clamps

MS Angle 65x65x6mm, 2028mm Long for G.I. Pipe [email protected] Kg./M

T-Off Channel 100x50x1300mm with Clamp nut& bolt

G.I. Guarding Angle 65x65x6x2600 mm

G.I. Guarding Angle 65x65x6x3600 mm

Holding clamp for guarding angle with nuts & bolts

F-Bracket with Bolt & Nuts 11KV Line

E-Bracket with Bolt & Nuts 11KV Line

Clamp for fixing X-arm with Nuts & Bolts

Holding angle with nuts & bolts 65x65x6x1600 mm

Holding Clamp with nuts & bolts

Painting number mark with paint

11 KV Danger Board with Nut & Bolt

PG clamps

Bolts ,Nuts & Washer

GI Wire 8 Nos.

GI Wire 10 SWG.

G.I. Wire No. 16 SWG

GI Barbed Wire

Stone Pad (300x300x75mm)

Al. Binding wire -6 SWG

Supply of HDPE Pipe 160 mm dia PN-6, PE-100 Grade UV Stabilized

Clamps for holding of 160 mm dia H.D.P.E. Pipe

Eye Bolt

Turn Buckle

Al. Paint

Red Oxide Paint

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

Clamps for fixing of Cable and cable boxes

Earthing of Pole by MS earthing rod of 20x2500mm. & 6 SWG earthing wire etc.

GI Stay Rod 16x1800mm

11 KV Stay clamp

11 KV Stay Insulator

Stay wire 7/10 SWG

Concreting of Stay Road 16x1800mm

Concreting of Supports (8.5 Mtr. PCC)

Concreting of Supports (11 Mtr. STP)

Concreting of Tower with M-20 Grade concrete for foundation with shuttering and making of plinth

Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below the Highway by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches.

Hoisting/Laying of 11 KV, 3x185 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure

Hoisting/Laying Laying of 11 KV, 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Cable route marker

Wooden Bushes

Transformer earthing complete (chemical pipe earthing as per spe.)

Plinth with RCC Top 2x2x1.5 Mtr.

11 KV Lightening arrestor

Structure for 11 KV Lightening arrestor

LT Clamp with nuts & bolts for PCC Poles.

2x4 sq.mm. PVC armoured Cable

D.P. Switch 63 A

Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring.

LED light 100 Watt complete with fitting and accessories

Copper L-Piece 400x50x6 m.m. for LT bushing rod of T/F

Al. crimping lugs 35 sq.mm.

Al. crimping lugs 50 sq.mm.

Al. crimping lugs 70 sq.mm.

SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)

Tree cutting compensation

Carriage of following material from Center Store to Site SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

L.T. Cable Al. 3.5 × 70 Sq.mm .

33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar

Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar

CONDUCTOR A.C.S.R. Dog conductor for switch yard

Polymeric 33 KV Pin Insulator

33 KV LINE :- 9 Mtr. Long PCC Pole

11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

ACSR DOG CONDUCTOR (9.445 X 3 + 3% Sag and Jumpering)

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

Polymeric 33 KV Pin Insulators

33 KV Disc Fitting B & S Type – 70 KN

33 KV Polymeric Disc Insulators B&S Type 70 KN

33 KV 'V' Type X-arm (G.I. Channel 100 x 50 x 6 mm.)

33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable

11 KV LINE :- 8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

ACSR Raccon Conductor (7.012x3+3% Sag and Jumpering = 21.668 Kms.)

11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable

LT Al. XLPE Insulated cable 1x50 Sq.mm

LT Al. XLPE Insulated cable 3.5x70 Sq.mm

11 KV TPMO with fixing clamp complete

11 KV Fuse set

11 KV Disc fitting B&S Type 45 KN

Polymeric 11 KV Pin Insulator

11 KV Polymeric Disc Insulator B&S type (45 KN)

11 KV V-Type X-arm

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

M/S S.P. & CO (BID ID -4740069)

AMIT ENGINEERING CORPORATION (BID ID -4738517)

M/S Sushil Kumar (BID ID -4738117)