SPECIAL REPAIR TO BUILDING NO P-5 WITH ALL ALLIED WORKS AT

Amount

B/R WORKS :- Rubbing and polishing to existing kota stone incluidng waxing to remove all stain, dirts/soil marks etc. all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down chowkhats or frame n. exc 1.5 sqm with shuttters (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n. exc 4 sqm with shuttters (without taking off shutters from the frames) all as specified and directed.

Material and labour welding in repairs n exc 2.5 cm in length and not exc 6mm thick of metal to be welded all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc.15cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each all as specified and directed.

Taking down 40 to 50 mm bore steel/PVC tubing including all fittings all as specified and as directed.

Taking down 25 to 32 mm bore steel/PVC tubing including all fittings all as specified and as directed.

Taking down 20 mm bore steel/PVC tubing including all fittings all as specified and as directed.

Taking down 15 mm bore steel/PVC tubing including all fittings all as specified and as directed.

Dismantling water tank of capacity exc. 1000 Ltrs and n.exc.2000 ltrs with all accessories such as gate valve, float valve etc. and considering under sch of Credit complete all as specified and directed .

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 350 x 450 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing coat with CM 1:4 all as specified and directed.

Material and labour for dark coloured Non skid tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges (joint free) etc set and jointed in neat cement slurry over cement screed 15 mm thick in CM1:6 all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

Supply and fix 125mm x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Material and labour for second class HW Rails & Style plain framed panelled factory made shutter 35 mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial venering on both faces the size of rails and stiles as per IS1003 (part I) kiln seasoned and chemicaliy pressure treated all as specified and directed.

Material and labour for 2nd class HW glazed and skeleton shutters, 35 mm thick open rebaed and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

Material and labour for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification and drawing all as specified and directed.

Supply and Fix factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face as per specification and drawing with particle board core all as specified and directed.

Supply and Fix 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and Fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix 150 mm long extruded aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix 100 mm long butt hinges medium weight cold rolled all as specified and directed.

Material and labour Cement concrete type C1, 1:3:6 using 20mm graded stone aggregate, 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified.

Material and labour for providing cement concrete type B-1 1:2:4 using 20mm graded stone aggregate as in intels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work. Exposed surface of concrete shall be finished even and smooth without using extra cement .

Material and labour removal of exisitng WPT course or any other kind of treatment surfaces over roof slab and cleaning the surface with wire brushes ,removing of unsolvent materials and depositing of the same as directed at a distance not exceeding 50 m and applying of oil bound bituminous primer @ 0.20 Kg/sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 160 gms / sqm incl minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note NO 6 of TD drawing No AFB/TD/260/06 sheet No 1/1 (R) and applying a coat of blown grade @ 1.2 Kg / sqm hot bitumen 90/15 on top of the memberane finished with solar paint/primer @0.1 Kg per sqm all as specified and as directed. Note : The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the contractor.

Material and labour padding concrete of 40 mm thick in cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as in roof all as specified and directed.

Material and labour screed bed or bedding layer in CM 1:3 of 15 mm thick for laying floor mixed with water proofing compound @100 ML per bag of cement as specified by manufacturer's instruction on concrete surfaces of roof and making the surfaces finished fair and even as in required slope for draining out the rain water all as specified and directed. Note :- WPC shall be measured and paid seperately.

Supply only liquid water proofing compound all as specified and directed.

Material and labour preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry and as directed.

Material and labour applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours and as directed

Material and labour applying second layer of 1.5mm to 2.0 mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour -crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed.

Material and labour for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in lean concrete in sunken portion all as specified and as directed.

Material and labour pre cast cement concrete block masonry type C1 1:3:6 using 20 mm graded stone agrregate solid blocks not exc 10 cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Material and labour Rendering 15 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement all as specified and directed.

Material and labour Rendering 15 mm thick cement plaster in CM 1:6 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement all as specified and directed.

Material and labour 5 mm thick cement plaster in CM 1:3 on ceilings and finished even & smooth without using extra cement all as specified and directed.

Material and labour fixed in repair for boarding of 25 mm thick in 2nd class hardwood , planed one side with butt joints if joints are chamfered one side and the boarding is matched, fixed in shelves; Partitions and shelves of built-in cup boards, almirahs, book cases, toilet boxes, racks, pelmets and similar work etc all as specified and directed.

Supply and Fix 4 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

Supply and laying of CPVC pipes of 50 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceilings or laying in floors including all fittings i.e., unions, reducers, sockets complete all as specified and directed.

Supply and laying of CPVC pipes of 25 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceilings or laying in floors including all fittings i.e., unions, reducers, sockets complete all as specified and directed.

Supply and laying of CPVC pipes of 20 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceilings or laying in floors including all fittings i.e., unions, reducers, sockets complete all as specified and directed.

Supply and laying of CPVC pipes of 16 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceilings or laying in floors including all fittings i.e., unions, reducers, sockets complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified and directed in SSR part I inlcuding fixing of PTMT ball valve epoxy coated aluminium rod and high density plastic ball of 40 mm dia as per site condition.

Disconneting existing tanks of capacity 1000 ltrs to 2000 ltrs, setting aside (or lowering if required) for cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. and reconnecting and re fixing in position after necessary cleaning.

Supply and Fix 100 mm long aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix in repairs 100 mm long aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix in repairs 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified and directed.

Supply and Fix hasp and staples 100 mm long, safety type, of aluminium anodised with mild steel hinge pin, including bolt to hinge plate fixed with screws all as specified and directed.

Supply and Fix in repairs hasp and staples 100 mm long, safety type, of aluminium anodised with mild steel hinge pin, including bolt to hinge plate fixed with screws all as specified and directed.

Supply and Fix in repairs 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete in mild steel fixed to MS frame or wooden frames all as specified and directed.

Supply and Fix in repairs 140 mm floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring fixed in floor all as specified and directed.

Supply and Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified and directed.

Supply and Fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified and directed.

Supply and Fix in repairs 4 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified.

Material and labour for preparation of old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying two coat of oil bound distemper over wall care putty 3 mm thick on walls all as specified and directed .

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of anti fungal paint over a coat of primer all as specified and directed .

Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed .

Material and labour for complete removal of existing treatment of old surface including preparation of surface and applying two coat of oil bound distemper over wall care putty 3 mm thick on walls all as specified and directed .

Material and labour for preparation of old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed .

Supply and Fix in repairs vitreous china wash down water closet pan pedestal pattern white (excluding flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device etc.,complete all as specified and directed .

Supply and Fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets including PVC Flush pipe 32 mm dia. 1.3 m long, and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified and directed.

Supply and Fix in repairs Vitreous China Urinal, half stall type, including 32mm size/bore flushing pipe and waste coupling all as specified and directed.

Supply and Fix in repairs PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity including flange valve handle, Bracket, PVC flush down pipe length upto 1.3 m height as required with bend all as specified and directed.

Supply and Fix repairs 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and Fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed all as specified and directed.

Supply and Fix in repairs brass chromium plated shower rose with or without swivel joint,125mm size including fixing to steel /CVPC pipes all as specified and directed.

Supply and Fix in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specified and directed.

Supply and Fix PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of 100/75 mm internal dia of any make all as specified and directed.

Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

Supply and Fix (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed

Supply and Fix PVC bends for 75 mm bore pipe with access door all as specified and directed.

Supply and Fix PVC bends for 110 mm bore pipe all as specified and directed.

Supply and Fix PVC SWR 110 mm dia branch pipe, single (Single Y) equal or unequal provided with access door all as specified and directed.

Supply and Fix PVC (SWR) vent cowl 110 mm dia all as specified and directed.

Supply and Fix in repairs CP soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed.

Supply and Fix 50 mm dia PVC LDPE pipes of pressure rating 6 Kgf/cm2 fixed complete to walls ceilings or in floors etc. including necessary clamping, bends, coupling, nipples where required all as specified and directed.

Removal of concrete and plaster debris to a distance 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of white wash on walls complete all as specified and directed.

Material and labour for cutting holes n exc 100 sq cm into or through cement concrte slabs, chajjas, etc. reinforcement cut through all as specified and directed.

Supply and Fix 0.71 mm thick plain aluminium sheeting in crumple portion all as specified and directed.

Supply and fix in repairs harrison rails 20 mm dia, anodized aluminium alloy, with fixing brackets etc all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in hard/dense soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed

Material and labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Material and labour for broken stone or boulders hardcore gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface all as specified and directed.

Material and labour for 75mm thick cement concrete , type D2 1:4:8 using 40mm stone aggregate as in sub base under floor all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr- in- charge.

Supply and fixing roof trusses (framed), trussed, purlins, cranes gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 290 (Gde E-165) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

Supply and Fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Supply and Fix prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Material and labour for providing precast cement concrete louvres and jallies set in CM (1:4), 25mm thick, type C0, 1:3:6, using 12.5mm graded stone aggregate (measured solid), including all mouldings but excluding frame complete all as specified and directed.

Material and labour for TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to rough finished edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like bands in walls complete all as specified and directed.

Supply and Fix Stainless steel Health faucet Ads body with 1 meter long flex tube in chrome finish and wall hook complete and all as specified.

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Taking down carefully unserviceable main switches/DB's from their position and removing materials from site all as specified and as directed .

Taking down old conventional U/S tube light fitting complete from its position on existing serviceable points and making good the disturbed surfaces all as specified and directed.

Taking down existing sub main wiring with aluminum conductor cable of 2.5 / 4/6/10 sqmm with GI earth wire on and including wooden batten/casing capping and removing materials from the site and making good distrubed surface of walls and and roofs complete all as specified and as directed by Engr-in-Charge .

Material and Labour for point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as directed by Eng -in Charge

One light point controlled by one, one way switch 5 Amp complete

One fan point controlled by one, one way switch 5 Amp complete

One 3 pin switch socket outlet 5 Amp independent

Supply and fix switch piano flush button single pole one way 5 Amp 240 V all as specified and as directed .

Supply and Fix swicth socket combination 2 in 1,3 pin 5 Amps flush type 240 volts complete all as specified and as directed .

Supply and Fix ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed .

Supply and Fix fan regulator, electronic, step type , flush mounting complete all as specified and as directed .

Supply and Fix Powder coated Batten for T5 28W with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core flexible copper conductor cable of suitable size all as directed Make & Model No for Batten : Havells Cat No. REGALBATTENT5UPTO1X18WSSBSWH and LED Lamp Havells Cat No CRYSTAL1213T8 DSTL20WLED 865SGLASS or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.21. on Sl Page No.178 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Sub main wiring with four single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 10 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with two runs 10 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Four runs of 10 sq mm cable and two run of 10 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 2.5 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 2.5 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 2.5 sq mm cable and one run of 2.5 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 4 sq mm cable and one run of 4 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Supply and Fix double door MCB DB SPN 8 way 240 Volts complete all as specified and as directed .

Supply and fix in repairs MCB SPN 32 Amps 240 volts, 50 Hz AC complete all as specified & directed .

Supply and fix in repairs MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Taking down ceilng fan,dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan .

Supply and Fix street light fitting LED 25 watt with fixing arrangement such as GI pipe bracket,MS clamp,Nut bolts etc and connecting all as specified and directed including taking down old UNSV one or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.21. on Sl Page No.178 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix ISI marked heavy duty Electric Alarm bell system suitable for school with minimum audible range of 250 metre including all minor accessories such as nut, bolt etc., complete all as specified and as directed including taking down old UNSV one.

Supply and Fix Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp Including taking out the unserviceable plug and socket.

DHAIRYASIL RAMAKANT DESAI

ASHIRWAD ELECTRICALS

Moulya Builders

Vinayaka Enterprises

G K CONSTRUCTIONS