Providing and fixing of Chain link fencing in cement concrete blocks, Planting of 500 nos of willows,1000 nos of SBT and earthwork excavation of irrigation networks at Rongo-I of Nyoma Forest Range for the year 2024-25 under the scheme CAMPA.

Amount

Earth work in excavation by means of (Hydraulic Excavator) over area exceeding 30cm in depth 1.5mtr in width as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. Lead upto 50m and lift upto 1.5m

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. Crushed in blocks.

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns and for mass concrete

Providing and fixing of G.I chain link fabric fencing abric 4mm dia fence cold dip galvanised of required mesh size 10cm x 10 cm wire of (4x4) mesh, including strengthening/binding with 2mm dia wire out or nut bolts and washer as required completely.

providung and laying and strengthening of barbed wire at top of the fence post including all jobs

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm diaetc of complete job

providing and installation of fabric iron gates 6x12=1 Nos with an angle iron framed inckuding Master Pillars (6x6) with cutting hoisitng welding and all fitted and fixxture and all lead completely

Providing and installation of Febric gates 4x6 =1Nos with angle iron framed including master pillars (6x6) with cutting hoisting welding and all fitted and fixture and all lead completely

Providing and fixing MS Iron sheet 3 mm of required pattern for for sign board for main gate entrance with one coat of steel premier and two coats of paint including departmental logo and writing etc with cement concrete sizing (6x4) with 7.00' legs (50x50x6) =1Nos oncudling all jobs as directed by incharge.

Carriage of sand and stione agg. By mechanical Transport from source to working site for a distance of 10.00KM

Carraiage of cement by mechanical Transport from source to Nyoma by an average of 210.00 KM

Carriage of fencing materials by mechanical transport fromLeh to Rongo for an average of 210.00 KM

Extration of willow green cuttings this including carriage, collection bundling and internal carriage

Pits Planting of willow green cutting this including excavation of pits 0.45x0.45x0.45m along the contour as well as on flat surface. This includes the formation of water harvesting structure etc.

Pits planting of SBT in pit size of 0.35x0.30x0.30m along the contour or flat surface, this including cost and carriage of good earth, sand, extraction, and collection etc of complete job.

Carriage of planting materials from near sources to planting site by M. transport, this includes loading and unloading charges etc

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

M/S THINLES ANGCHOK CONTRACTOR (BID ID -147151)

M/S SD FABRICATION (BID ID -147137)

M/S YOKMA STEEL FABRICATION (BID ID -147107)

M/S JARA STEEL FABRICATION (BID ID -147102)

JOHAR ALI (BID ID -147104)

M/S BALTOK WIRE AND NAIL MANUFACTURING (BID ID -147051)