Loading
Loading…
Loading…
Tender Value
₹5.4 Cr
EMD Value
₹4.2 L
Closing Date
2 Apr 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or 'V' which ever is less, where V= Advertised value of the tender in crores of Rupees N= Number ofyears prescribed for completion ofwork for which bids have been invited. The average annual contractual tumover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, tho audited balance sheet of the fourth previous year shall be considered for calculating average annual bontractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Provision of lifeline arrangements in Industrial sheds/Workshops
31 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
SPECIAL CONDITION FOR GST-•The details of supply of Goods & Services are subject to GST rules applicable with effect from 01.07.2017.
Special Conditions for GST-All the Tenderers are requested to submit their "GSTIN" registration numbers at the time of tendering or at the time of submitting their invoice without which, payment will not be made.
The materials should be supplied as per the approved make list mentioned in the tender document
Proposed lifeline arrangement in Shop 30, 30A, 54, Dispatch shed and DPRS shed in Furnishing division.
2026377212158
2026377212158
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹4.2 L
2 Apr 2026
12 Mar 2026
19 Mar 2026
16 items across 1 schedule · ₹5,38,56,216 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Anchor Plate Standard Straight Eye : MOC - SS316 , Cable Tensioning: 5.0 kN ,Net Weight kg (lb): 0.35 (0.8) . Minimum Breaking Strength kN (lb) :45kN (10000) . Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part- 8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. | Numbers | — | — | — |
| 2 | Supply of 19kN Peak Force, 5kN System Tensioner Built - in Energy Absorber : MOC - SS316 & System should have Twin ZORBIT Energy Absorber with built-in Tensioner for better stability & ensure adequate Safety to entire system & users. Built-in Tensioner should Tension Indicator like Green & Red Marking on the device to attain required tension of Life Line. Inline energy absorber with an 19kN (4270 lbf) peak arrest force. Includes 5kN (1125 lbf) system tension indicating spring. Total elongation 0.61m (24"). Maximum 4 users capacity, 6kN (1350lbf) or 8kN (1800lbf) peak force connecting device, dependent on system layout. Cable Tensioning: 5kN Net Weight kg (lb): 2.5 (5.5) Minimum Breaking Strength kN (lb): 38KN (8550) Peak Deployment Force kN (lbf): 19KN (4270) Average Deployment Force kN (lbf): 16KN (3600) Total Elongation m (ft): 0.6M (2) Should be capable of providing 30 Meters Span Column to column . Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part-8)/ EN 795:2012 Type C/ CEN/TS 16415:2013 The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 43.00 66946.00 | — | 28,78,678 |
| 3 | Supply of Overhead Traveler : MOC: SS316 Operating Temperature Range: 120°C (248°F) to -50°C (-58°F) Capacity: 1 user, 141kg (310lbs) maximum including clothing and tools. Non detachable traveler. Net Weight kg (lb) 1.2 Kgs Minimum Breaking Strength kN (lb) 22.2 (5000) Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA / INOVATIX/ DELTAPLUS/U NICARE/PIP-HSP ] or Equivalent. The item shall comply with the requirements of IS 3521 (Part-8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. " | Numbers | 146.00 41609.00 | — | 60,74,914 |
| 4 | Supply of 8mm 7x7 SS Cable : 250 Mtrs - 8mm Permanent Horizontal Lifeline applications. 7X7 Core strands - 8mm SS316 Cable Life Line Minimum Breaking Strength 38.7kN Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/ DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part- 8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Metre | 7965.00 459.00 | — | 36,55,935 |
| 5 | Supply of INTERMEDIATE BRACKET : Material - SS316 - Natural Finish Breaking Strength - 24kN Should be capable of providing 30 Meters Span Column to column . Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part-8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 224.00 2879.00 | — | 6,44,896 |
| 6 | Supply of Hex Swage Toggle : MOC - SS316 - Used to terminate cable at one end of system. For use with 8mm 1X19 Cable. Minimum Breaking Strength kN (lb): 38kN (8550). Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/ DELTAPLUS/U NICARE/PIP-HSP ] or Equivalent. The item shall comply with the requirements of IS 3521 (Part-8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 43.00 7219.00 | — | 3,10,417 |
| 7 | Supply of Dampner 5KN : For use in systems where mechanical and thermal cyclic loading are likely as a means to reduce the effects these external loads have on the system components through changes in tension. Also includes of tensioning capability and visual tension indication. Automatic Cable Tensioning: 5kN ( 500 Kgf ) Operating Temperature Range: 120°C (248°F) to -50°C (-58°F) should be capable of providing 30 Meters Span Column to column. Product and corosion resistance warranty for 10 Years . Make:3M DBI SALA /INOVATIX/DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part-8)/ EN 795:2012 Type C/ CEN/TS 16415:2013. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 43.00 52038.00 | — | 22,37,634 |
| 8 | Supply of COMFORT HARNESS : 5-points adjustment full body harness with dorsal D- ring, Impact Indicator Approval: EN APPROVAL Make:3M DBI SALA /INOVATIX/ DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part- 1). The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 146.00 3098.00 | — | 4,52,308 |
| 9 | Supply of Retracting Fall Arrester 10 MTRS : Rugged, lightweight thermoplastic housing 10 MTRS - GI Wire rope - 7/32 in ( 5.6 mm ) Stackable housing design Built-in carrying handle 140kg Capacity CE EN360 Certified Make:3M DBI SALA /INOVATIX/ DELTAPLUS/U NICARE/PIP-HSP] or Equivalent. The item shall comply with the requirements of IS 3521 (Part- 2). The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete." | Numbers | 146.00 31925.00 | — | 46,61,050 |
| 10 | Supply of Aluminium anodized System Tag with screen printing letters The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. | Numbers | 43.00 2592.00 | — | 1,11,456 |
| 11 | Supply & Fabrication of Drop Post With Weld at both existing Structure for LIFE LINE ANCHORAGE (DP) SHS100x100x4mm. The item shall comply with the requirements of IS 800/IS 4923. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. | Numbers | 75.00 9027.00 | — | 6,77,025 |
| 12 | Supply & Fabrication of 6mtr L Post With Civil Work LIFE LINE ANCHORAGE (LP) . SHS200x200x5mm vertical column with column to column span Minimum 25 MTRS & Maximum 30 MTRS, 3.5M Cantilever beam and cross support SHS 150x150x5mm, End to end 12m max tie beam SHS100x100x5mm. FOUNDATION : 1.2m deep x 1mL x 1mB size, Footing 1mLx1mBx0.3mH, RCC piller 0.45mLx0.45mBx1.1mH with 8nosx12mm TMT rod vertical with 8mm ring, Foundation bolt M20x750mm long 6nos. The item shall comply with the requirements of IS 800/IS 4923. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. (Tie beam will be paid under item No: 14) | Numbers | 221.00 116230.00 | — | 2,56,86,830 |
| 13 | Supply & Fabrication of 7mtr L Post With Civil Work LIFE LINE ANCHORAGE (LP) . SHS200x200x5mm vertical column with column to column span Minimum 25 MTRS & Maximum 30 MTRS , 3.5M Cantilever beam and cross support SHS 150x150x5mm, End to end 12m max tie beam SHS100x100x5mm FOUNDATION : 1.2m deep x 1mL x 1mB size, Footing 1mLx1mBx0.3mH, RCC piller 0.45mLx0.45mBx1.1mH with 8nosx12mm TMT rod vertical with 8mm ring, Foundation bolt M20x750mm long 6nos. The item shall comply with the requirements of IS 800/IS 4923. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. (Tie beam will be paid under item No: 14) | Numbers | 25.00 134520.00 | — | 33,63,000 |
| 14 | Supply of TIE Beam of single hollow section of size 125X125x4mm ,MOC - IS 2062. The item shall comply with the requirements of IS 800/IS 4923. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. | Metre | 579.00 3363.00 | — | 19,47,177 |
| 15 | Supply & Fabrication of Beam bracket with chemical anchor bolt from existing RCC Beam for LIFE LINE ANCHORAGE (BB). The item shall comply with the requirements of IS 800/IS 4923. The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. | Numbers | 2.00 19824.00 | — | 39,648 |
| 16 | Installation charges: Installation need to be carried by OEM Certified Installer and necessary validity certificate need to be submitted.The rate quoted shall be inclusive of contractor's materials, transportation, scaffolding, labour, tools and plant, lead and lift, taxes etc. complete. Note: The rate is inclusive of Installation of all the above items (Sl.No: 1 to 15) in 43 different locations. The drawings for each location shall be submitted along with BOQ for approval. The life line shall be capable of supporting 4 persons (4*68 Kg minimum). The components of life line shall be designed/manufactured as per IS/EN standards. The work to be taken up after the approval of drawings only. The installed life line shall be certified for compliance with IS/EN code by a third party auditor approved by Govt of India and Safe certificate in this regard shall be submitted to ICF. Note: Physical completion certificate will be issued only after the submission of safety certificate. The lifeline items covered under Sl Nos: 1 to 9 shall be procured from any one manufacturer only & Each component shall be laser embossed with CML Number. | Numbers | 43.00 14750.00 | — | 6,34,250 |
| Schedule total | ₹5,38,56,216 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
lifelinepdf.pdf
ATTACHMENT
Conservancycharges.pdf
ATTACHMENT
CompleteBiddocument_compressed.pdf Bid document
ATTACHMENT
jpo_1.pdf
ATTACHMENT
Additionalsafetyaspects.pdf
ATTACHMENT
gccwithcorrectionslips.pdf
ATTACHMENT
CompleteBiddocument_compressed.pdf
ATTACHMENT
RevisedProcedureOrder-11-02-2026Final.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .