PERIODICAL SERVICES AND MISC WORKS TO TRISHUL HOUSE AND SPORTS COMPLEX OF AGE BRI UNDER PERIODICAL SERVICES AND MISC WORKS TO TRISHUL HOUSE AND SPORTS COMPLEX OF AGE BRI UNDER GE AF SUBROTO PARK

Amount

Demolition of plain cement concrete in ground floors n. exc. 15 cm in thickness (below or above GL) unreinforced complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.

M&L for vitrified tiles 9 to 10mm thick (square/rectangular) in any pattern area of each tiles not exceeding 0.36 sqm, in floors/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 600x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement 1 :4 and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L Glazed printed/ coloured ceramic tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement 1 :4 and pointed in white or coloured cement to match the shade complete all as specified and directed.

S&F joint free anti skid printed and coloured ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.11 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L for 300mm x300mm x 10mm vitrified industrial (Endura) tile in floor set and jointed in set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L 16 to 18 mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, WHB counter and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl cutting for WHB etc over 10mm thick screed bed or bedding layer of cement mortar 1:4 and including moulding complete all as specified and as directed

M&L for cement concrete 1:2:4 type B-1(20mm graded aggregate), 40mm thick complete all as specified and as directed by Engineer-in-charge.

S&F 20 – 22 mm thick designers coloured glossy finished cement concrete floor tiles of size (30x30cm) or next higher size and design as approved set and jointed in neat cement slurry laid over 15mm thick cement screed mortar in CM 1:6 complete all as specified and directed.

S & F in repair 25mm dia Stain less steel 206 grade drapery rod in gloss finish including all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as directed and specified.

S&F in repair factory made uPVC white colour fixed glazing made of extruded profile with wall thickness of 2.0mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm) including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanized steel frame (28mmx21.5mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Note : Glass shall be measured and paid separately however cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose.

Providing and fixing factory made UPVC window/door frame for three track window / Door made of UPVC made of extruded profile with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm), sash (60mmx78mm). T profile (One vertical length in between two shutters) (60mmx71mm) Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanized steel frame (28mmx21.5mm) sash (31mmx27mm) 'T' profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Each shutter with zinc alloy touch lock, Zinc alloy roller, handle with mortice lock, rubber gasket etc, complete as per manufacturer's specification. Note : Glass and wire mes shall be measured and paid separately however cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose.

S&F 6mm thick tempered glass in uPVC door and window shutters /frame(for fixed window) complete all as specified and directed

S&F frosted lamination in required design over toughened/float glass incl making logo or design as approved. Note: for measurement full size of glass will be measured.

M&L powder coated aluminium wk as in partition wall/door Chowkhats/door/ windows shutters using JINDAL section single groove any suitable section conforming to IS-733 and IS-1285 amd coating grade A-153 confirming to IS-1868 fixed with rawl plug and screw or with fixing clips with expansion hold fasteners including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading packing anodised aluminium snap beading screws, powered coated anodised aluminium fittings etc gap of junction at top, bottom & sides to be filled with silicone fillers/Neoprene felt etc complete all as specified and directed.

M/L Powder coated aluminium door shutters, aluminium section weighing 1.3 kg/m approx including each shutter having 2 Nos. ‘D’ type aluminium handles of 200 mm long, 2 Nos. aluminium tower bolts of 200 mm long and 1 No. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly panelled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specified and directed. ( Glass & Prelaminated particle board paid separately)

M/L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m approx. including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to uPVC window /door frame complete all as specified.

S/F in repair vitreous china coloured One piece EWCs with integrated cistern, seat cover and twin flush fittings and including P or S trap etc. all as spfd and completed ( Cat part CARVEL of Cera or Equivalent )

Supply and fix in repair counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cm Cat part of Jaquar OPS-WHT-15901N or Equivalent in cera, hindware complete all as specified and directed.

Supply and fix in repair for toughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubical with sliding door etc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete, all as specified and directed by Engineer-in-Charge.

S & F in repair glass corner triple layer shelf assembly with CP frame complete all as specified and directed

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminium door or partition, any thickness, including cover fillets & framed work if necessary complete all as specified and directed.

Material and labour for gypsum false ceilings with size 60cm x 60cmx9mm thick false ceiling tiles laminated on face and side with decorative PVC films and a metalize polyester film on back sides back in dew drop texture Ceiling tiles shall be fixed over and incl Powdered coated GI T- grid system of size 600X600 mm as per the manufactures instructions. Note Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and as directed by Engineer-in-charge.

M&L for 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to sunk or raised moulding to flat surface over metal frame work incl reinforced with G.I. wire mesh & Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified and directed. Note Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed.

Same as above item no but as coup (down or raised portion) of POP 300mm wide and 150mm down false ceiling (for measurement only coup side will measured other portion will measured in above item) complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repair HIGH DENSITY FIBRE BOARD (HDF) 18 mm thick incl edges banding 2mm thick exterior grade termite proof, fixed with screws to frame as in cupboards, shutters, shelves, pelmet etc., complete all as specified and directed

Supply & fixing 0.8mm thick Matt finish acrylic Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed

S&F 100 mm size Stainless Steel handle, complete all as specified and as directed

S&F stainless steel 110 degree hinges for cupboard complete all as specified and as directed by Engineer-in-charge.

S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed.

M &L for ABS body magnetic latches of size 50mm complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement all as specified.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of cement base paint over a coat of lime wash complete all as specified and directed.

M & L for taking up or down 15mm bore steel tubing complete all as specified and as directed by Engineer-in-charge.

M & L for taking up or down 20mm bore steel tubing complete all as specified and as directed by Engineer-in-charge.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.

All as per item above but 20mm bore complete all as specified and as directed by Engineer-in-charge.

M & L for dismantling un serviceable water tanks any description exc 500 but not exc 1000 Liters complete all as specified and as directed by the Engineer-in-Charge

All as per item No 65 above but 250 but not exc 500 Liters complete all as specified and as directed by Engineer-in-charge.

S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks, triple layer (white colour) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by the Engineer-in-Charge

All as per item No 67 above but 250 but not exc 500 Liters capacity complete all as specified and as directed by Engineer-in-charge.

S&F In repairs PVC flushing cistern , 10 Ltrs Capacity low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes complete all as specified and as directed by Engineer-in-charge.

S & F in repair Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore complete all as specified and as directed by Engineer-in-charge.

S & F in repair Pillar cock, CP 15mm bore cast copper alloy with chromium plated fancy type screwed both ends, screwed down high pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower rose 125 mm size with swivel joints including fixing to pipe complete all as directed

S&F in repair 5mm thick glass sheet shelf 12 mm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-charge.

S&F in repair 5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall complete all as specified and as directed by Engineer-in-charge.

S&F in repairs CP towel rail 600 mm long complete all as specified and as directed by Engr-in charge

S&F in repairs PVC cabinet mirror complete all as specified and as directed by Engr-in charge

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with shutters in properly of any size in each pane incl hacking out complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs Aluminium die cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S & F in repair wash hand basins, vitreous china flat back of size 630 mm X 450 mm including cutting for and pinning in ends of brackets or erecting stand including brackets duly painted, 32 mm dia waste fitting of brass, PVC waste pipe of 32 mm dia and of suitable length etc complete all as specified.

S&F in repairs Vitreous china wash down water closet pan(pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe antisphonage pipe , etc including seat and cover for pedestal pan, flush pipe, incl all joints complete all as specified and directed.

S&F in repair vitreous china squatting pan “Orissa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed.

S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with screws complete all as specified and directed.

S&F in repairs 1mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F in repairs touch free automatic vitreous china urinals with concealed sensor with dual model (electrical and battery operated) cat part no Kinox-KUF of Euronics or 60018 of hind ware or 5005A of Cera incl necessary fittings complete all as specified.

S&F in repairs sensor dual model (electrical and battery operated) only for automatic vitreous china urinals incl necessary fittings complete all as specified.

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure complete all as specified and as directed by Engineer-in-charge.

S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side GLOSSY FINISH IN APPROVED COLOUR AND PATTERN BY GE and other side plain for kitchen cabinet/vanity below WHB shutter including machine pressed PVC edge banding in matching colour over all exposed edge Complete all as specified and directed.

S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed.

S&F factory made 5mm thick PVC sheet of density 600kg/cum manufactured by an ISO-900-2008 certified company. Plain 5mm thick PVC sheet panelling for back side(wall side) Complete all as specified and directed.

S&F 100 mm size Stainless Steel handle, complete all as specified and as directed

S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed.

M &L for ABS body magnetic latches of size 50mm complete all as specified and as directed by Engineer-in-charge.

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat to surfaces complete all as specified and directed.

Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm but n exc 4.0 sqm each complete all as specified and directed.

S&F for Factory made solid PVC moulded door with particle board core shutter 28 to 30mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and directed.

S&F PVC solid door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube, fixing in opening complete all as specified and directed.

S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.

S&F 100 mm long Aluminium handles, extruded type, anodised complete all as specified and directed.

S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L complete removal of existing treatment of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed

M & L complete removal of existing treatment of walls and applying two coats of exterior weather proof emulsion paint complete all as specified and as directed by Engineer-in-charge.

M & L complete removal of existing treatment of walls and applying two coats of plastic emlusion paint over a coat of wall care puty complete all as specified and as directed by Engineer-in-charge.

M & L complete removal of existing treatment of ceiling and applying two coats of plastic emlusion paint over a coat of wall care puty complete all as specified and as directed by Engineer-in-charge.

M & L complete removal of existing treatment, as preparation of old decorated surface of walls and applying two coats of cement based paint complete all as specified and as directed by Engineer-in-charge.

M&L preparation of old plastered surface and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and as directed by Engineer-in-charge.

JAIPAL and BROS

J D ENTERPRISES

Rishi Constructions