Construction of HMV and MMV Parking Shed Storage Accommodation and Rest Room at BMT Complex IRBN HQ SW Providing IEI and EEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double Door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing of following rating four pole, 415 switch Disconnector with SS Enclosure and rotary handle etc complete similar to Havells Cat No. IHCSFE0063 or its equivalent as required. a) 63A

Supplying and fixing Plastic Board of 3.5" x 6" on surface including providing and fixing 5 Pin 5/6 (2&3 Pin) amps socket outlet and 5/6 A, P.T Switch connection painting etc., as required.

Supplying and fixing Plastic Board of 3.5" x 8" on surface including providing and fixing 6 Pin 6/16 amps socket outlet and 16 A, P.T Switch connection painting etc., as required.

Supplying and fixing of surface mounted LED batten fitting for 20 W T-8 Lamp Similar to crompton Cat No. DMLN1LT8-16 with 20 W Retro fit LED Lamp Crompton Cat No. LT8-20-865-2 or its equivalent.

Supplying and fixing Bakelite batten/ angle holder including connection etc., as required.

Supplying of 12Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12W/B22 as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying of A.C Ceiling fan (1200 mm) sweep (Color: White/ Brown) Similar to make Crompton Empower 50-1 Star & ISI Marked with out regulator or its equivalent as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Single phase 300mm sweep 900 RPM Heavy duty Exhaust fan similar to Havells Cat No. Turbo Force SP including Bird Gauard as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing of 45 Watt LED Street Light Luminaire similar to C&S Cat No. INDUS- i/45W / LTESSI45WLED on the existing Street Light pole i/c replacement of existing defective MS clamps as required.

Supplying and fixing of 25 Watt LED Street Light Luminaire similar to C&S Cat No. INDUS- i/25W / LTESSI25WLED on the existing Street Light GI Bend Pipe as required.

Supplying & fixing of 40mm standard pre- casted street light G.I Bend Pipe suitable for wall mounting for fixing of street light fitting.

Supplying and erection of out door Feeder panel of size 0.6mtr x 0.5 mtr x 0.3 mtr made up of 3mm thick CRCA sheet having double sided hinged doors on both side (front back) with self supported 0.6 mtr length legs with 30 mm x 30 mm x 3 mm equal angle including locking arrangement to accommodate 100 Amps capacity Aluminium Bus Bar on suitable DMC support and 3 Nos. 100 amps Cut out and neutral as required.

Supplying of following XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: No. 7098 (Part-I) and IS: No. 1554 (Part-I) 1958 as applicable. a) 16 Sq.mm x 4 Core

b) 25 Sq.mm x 3.5 Core

c) 50.0 Sq.mm x 3.5 Core

Supplying and Laying of following one Number Double walled corrugated high density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE filling for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation & refilling the trench etc as reqd. a) 50 mm outer dia and 38 mm inner dia

b) 63 mm outer dia & 50 mm inner dia

Supplying and fixing of following one Number Double walled corrugated high density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE filling for protection of 1.1 KV grade directly on wall surface as required a) 50 mm outer dia and 38 mm inner dia (clamped with 1mm thick saddle

Supplying and Laying of following one Number Double walled corrugated high density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE filling for protection of 1.1 KV grade directly on ground/wall/ surface etc as required. a) 50 mm outer dia and 38 mm inner dia

b) 63 mm outerdia & 50 mm inner dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required a) 80 mm dia

Supplying and making end termination with aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 16 sq. mm (28mm)

b) 3½ X 25 sq. mm (28mm)

c) 3½ X 50 sq. mm (35mm)

Supplying and replacement of defective AC Ceiling Fan (1200 mm) Sweep (Color: White/ Brown) Similar to make Crompton Empower 50-1 Star and ISI Marked with out regulator or its equivalent as required. (for Admin. Block, Jawan barracks, SOS Mess, NCO Mess etc.)

Supplying and Replacement of defective 20W Retro Fit LED Tube Lamp Similar to crompton Cat No. LT8 -20 -865-2 or its equivalent as required. ( for Admin. Block, MI Room Armory Block etc.)

Supplying and Replacement of defective 12W LED Ball Lamp B22 Similar to C&S Cat No. LTHPLEDLAMP12W/B22 or its equivalent as required. ( for Admin. Block, MI Room Armory Block etc.)

NAVJEEVAN ENTERPRISES

M/s Sai Electrical Works

POWER ENGINEERING CO

ELECTRICAL PLAZA

DAYAL HALDER

SHANTI ENTERPRISES

M K ENGINEERING