REPAIRS MAINTENANCE OF INTERNAL WIRING FITTING AND FIXTURES AND CONNECTED ITEMS IN TECHNICAL AREA OF AGE E M WEST JALAHALLI UNDER GE M AF JALAHALLI BANGALORE

Amount

Taking down carefully aluminium Point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, etc. all as directed.including taking down fittings such as switches, ceiling roses, regulators, sockets,lamp holders, ceiling fittings, bulk head fittings, any type tube light fittings/building security light fitting etc. complete all as specified.

Supply and fixing for Existing concealed conduit Point wiring with 1.5 Sq mm multistranded copper conductor FRLS PVC insulated and unsheathed cable ISI Marked & drawing in and including non-metallic PVC concealed conduit 20 mm bore medium grade & ISI marked on walls/ceilings/steel frame structure (with necessary arrangement as required at site) including cutting chasing for concealed wiring , pinning in making good & finishing of disturbed surfaces,white wash matching with the existing surface colour & including all conduit fittings, clamps, gutties etc. for one light/fan point controlled by one switch or one fan point controlled by one switch and regulator each including provision of new pressed steel terminal boxes not less then 1.6 mm thick; with provision of new 3 mm thick plastic laminated sheet of and PVC insulated stranded copper continuous earth wire 1.5 Sqmm size FRLS to common earth and connecting to earth dolly, complete all as specified and directed. (Switch/socket, regulators shall be measured & paid for separately). Note- All the wires will be used with approved colour coding and as directed by Engr in-charge.

All as per item 2.00 above but for 3 pin socket outlet 5 amp independent but not below the main board In the same vertical plane complete all as specified.

All as per item 2.00 above but for 3 pin socket outlet 5 amp on the same board controlled by separate switch complete all as specified.

All as per item 2.00 above but with 2.5 sqmm copper conductor for 15 amp switch socket outlet combination n1. including 1.5 sqmm copper earth wire complete all as specified..

All as per item 2 above but with 4 sq mm copper conductor with 2.5 sqmm copper earth wire.

Supply and fixing for surface conduit Point wiring with 1.5 Sq mm multistranded copper conductor FRLS PVC insulated and unsheathed cable ISI Marked & drawing in and including non-metallic PVC concealed conduit 20 mm bore medium grade & ISI marked on walls/ceilings/steel frame structure (with necessary arrangement as required at site) including cutting chasing for concealed wiring , pinning in making good & finishing of disturbed surfaces,white wash matching with the existing surface colour & including all conduit fittings, clamps, gutties etc. for one light/fan point controlled by one switch or one fan point controlled by one switch and regulator each including provision of new pressed steel terminal boxes not less then 1.6 mm thick; with provision of new 3 mm thick plastic laminated sheet of and PVC insulated stranded copper continuous earth wire 1.5 Sqmm size FRLS to common earth and connecting to earth dolly, complete all as specified and directed. (Switch/socket, regulators shall be measured & paid for separately). Note- All the wires will be used with approved colour coding and as directed by Engr in-charge.

All as per item 7.0 above but for 3 pin socket outlet 5 amp independent but not below the main board In the same vertical plane complete all as specified.

All as per item 7.00 above but for 3 pin socket outlet 5 amp on the same board contraolled by separate switch complete all as specified.

All as per item 7.0 above but with 2.5 sqmm copper conductor for 15 amp switch socket outlet combination n1. including 1.5 sqmm copper earth wire complete all as specified..

All as per item 7.0above but with 4 sq mm copper conductor with 2.5 sqmm copper earth wire.

Supply & fixing in replacement of switch piano flush button type 6 Amp 240 Volt one way single pole complete all as specified.Make-Havells/Anchor/Indo asian

Supply and fixing Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5A complete all as specified.

Supply and fixing switch socket combination multi purpose 5 Amp /16 Amps, 5 in1, flush type complete all as specified and directed.

Supply and fixing electronic double space rotary step fan 5 speed socket type regulator 120- 280 Volts complete all as specified.Make-SSK/HPL/Havells

Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and directed.

Supply & fixing in replacement of electric bell AC ding dong type 240 Volt complete all as specified

Supply and fixing modular type switch 6 Amps, one way complete all as specified. Make- Crabtree/Havells/ Legrand or equvalent approved make.

Supply and fixing Modular Type Socket outlet, 6 Amps, complete all as specified. Make- Crabtree/Havells/ Legrand or equvalent approved make.

Supply and fixing Modular Type Socket outlet, 6/16 Amps, complete all as specified. Make- Crabtree/Havells/ Legrand or equvalent approved make.

Supply and fixing Modular Fan step regulator, 100/120W - 2 module Electronic step type complete all as specifed and directed. Make- Crabtree/Havells/ Legrand or equvalent approved make.

Supply and fixing lamp holder, PVC/Polycarbonate insulated body with back plate batten / angle / pendent type complete all as specified and directed.

Supply and fixing the White cover plate with frame 2 Module complete all as specified and directed by Engr-in-charge..Make-Indo Asian/havells/legrand

Supply and fixing the White cover plate with frame 3 Module complete all as specified and directed all as specified and directed by Engr-in-charge .Make-Indo Asian/havells/legrand.

Supply and fixing the White cover plate with frame 6 Module complete all as specified and directed all as specified and directed by Engr-in-charge..Make-Indo Asian/havells/legrand

Supply and fixing the White cover plate with frame 8 Module complete all as specified and directed

Supply and fixing the Metal flush box 2 Module complete all as specified and directed by Engr-in-charge.Make-Indo Asian/havells/legrand

Supply and fixing the Metal flush box 3 Module complete all as specified.Make-Indo Asian/havells/legrand

Supply and fixing the Metal flush box 6 Module complete all as specified.Make-Indo Asian/havells/legrand

Supply and fixing the Metal flush box 8 Module complete all as specified.Make-Indo Asian/havells/legrand

Supply and fixing of Modular blanking plate etc complete all as specified and directed.

Supply & fixing in replacement of lamp LED type of 10 Watt suitable for complete all as specified and directed Make : CG/wipro/Havells

Supply and fixing the Batten tube light fitting suitable for 18 watt LED tube light single wall/ceiling mounted with all accessories internally prewired and including LED T5 lamp with high frequency power factor 0.9connecting up with twin core copper conductor cable of size 23/.0076 from ceiling rose to connector block all as specified Make : CG/wipro/Havells

Supply and fixing LED Tube light fitting 2 feet 1 x 10 watt 230 Volt, with reflector,drivers,LEDs and , complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down. Make : CG/wipro/Havells

Supply and fixing bulk head LED Light fitting deep drawn anodised alluminium body, epoxy white powder coated, heat resistant, prismatic glass cover with specially designed complete att all as per directed by Engr- in - charge Make : CG/wipro/Havells

Supply and fixing box type mirror LED light fitting of 10 watt ith anty glare diffuser & decorative complete att all as per directed by Engr- in - charge Make : CG/wipro/Havells

Supply & fix the Square LED down lighter 15 watt fit at surface/Ceiling complete all as specified and directed Make : CG/wipro/Havells.

Supply & fix in repair the surface/recced type LED down lighter of 36 watt fixing with accessories complete all as specified and directed Make : CG/wipro/Havells.

Supply and fixing in repair LED Street/security Light Fittings with Cast aluminium body and PC diffuser with 20 watt lamp and other connected accessories including service bracket of GI pipe 40 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers as required at site and making electrical connection complete all as specified and directed. Make- CG/Phillips/wipro

Repair to circuit Point wiring for light/fan/socket 5 Amps and 15 Amps by fault circuit, removing and replacing the burnt and unserviceable wire with new PVC cable copper conductor 1.5 Sqmm size, jointing with same size wires, replacing the saddles, refixing the loose/hanging conduits properly complete all as specified

Repair to circuit Point wiring for light/fan/socket 5 Amps and 15 Amps by fault circuit, removing and replacing the burnt and unserviceable wire with new PVC cable copper conductor 2.5 Sqmm size, jointing with same size wires, replacing the saddles, refixing the loose/hanging conduits properly complete all as specified

Supply and fixing switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix in repair the unserviceable Switch socket combination flush type 2 in 1, 3 pin, 5 Amps 230V and connecting circuit complete all as specified.

All as per item No 44 above but Switch socket combination flush type 3/5 pin, 15 Amps 230V.

All as per item No 44 above but ceiling fan regulator electronic type 100 to 180 Watt & capacitor surface type complete all as specified.

Supply and fix in repairs and including copper flexible wire 3 core 1.00 sqmm copper cable connecting up the light fittings all as directed.

Material and labour in replacement of 3 mm thick 75 x 100 mm size laminated sheet cover ISI mamrked including cutting of holes for mounting, switches, sockets, fan regulator etc of following sizes complete all as specified and directed.

All as per item No-48 but 100 x 100 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No- 48 but 100 x 150 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No -48 but 150 x 200 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No . 48 but 350 x 200 mm laminated sheet cover with 04 Nos screw with washers complete.

Supply and fixing in replacement of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

All as per item No No 53 but 200 x 150 x 50 mm deep complete.

All as per item No item No. 53 but 250 x 200 x 50 mm deep complete.

All as per item No .53 but 350 x 300 x 50 mm deep complete.

Supply and fixing in repair mounting block with cover in round shape for junction of wiring circuit etc complete all as specified and directed.

Repair to light fitting & fixture fluorescent tube light ,Surface&ceiling downlighter/any rating/make/model in position including testing of serviceability of connected accessories, and wiring upto respective switch/control unit including replacing unserviceable minor items otherthan specified under item No 60 to 67 and making light functional. (Note : Major spare will be measured and paid seperatly in respective items.)

Supply & fix the CFL 36 watts 4 pin.Make : Bajaj/CG/Havells

Supply & fix 4 pin holder suitable for CFL 36 watts

Supply & fix Choke electronic slim type suitable for fluorescent light fittings 14/20/28Watts.

Supply & fix the LED FTL rod 4 Feet capacity 20 W Make : CG/Bajaj/Havells

Supply & fix LED FTL rod 2 Feet capacity 10 W Make : CG/Bajaj/Havells

Supply & fix electronic LED driver 40W for panel type fitting of suitable size complete all as specified.

Supply & fix electronic LED driver 29W for panel type fitting of suitable size complete all as specified.

Supply & fix LED driver 18W/20/22W of fitting suitable size complete all as specified.

Taking down carefully DB box any type and capacity including connected accessories etc complete removal of materials from site & making good the disturbed surfaces of wall, to match with the existing surfaces complete all as directed by the Engr-in-Charge and specified.

Supply and fixing for sheet metal enclosure MCB DB, IP-43, SPN, 240 volts ,6 way, double door type grouted in wall in cement mortar 1:3 and making electrical connection, complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing for sheet metal enclosure MCB DB, IP-43, SPN, 240 volts ,8 way, double door type grouted in wall in cement mortar 1:3 and making electrical connection, complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing in replacement of TPN Vertical Type Distribution Board, IP-43 protection, fitted with bus bars, neutral links, blanking plates (with out MCCB), 415 volts, 4 way double door type, grouted in wall in cement mortar 1:3 and making good of disturbed surface and matching with existing surface, complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing in replacement of MCCB, 4P, rated current 63 Amp, breaking capacity 16/18 kA thermal magnetic type and making electrical connection, complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing in replacement of MCCB, 4P, rated current 100 Amp, breaking capacity 16/18 kA thermal magnetic type and making electrical connection, complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing MCB SP, 5 to 32 Amps, 240 volts, 10 KA, 'C' Curve characteristics, including taking out old unserviceable MCB/Isolator, electrical connections and removal from the site complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing MCB SP,63 Amps, 240 volts, 10 KA 'C' Curve characteristics, including taking out old unserviceable Isolator & electrical connection and removal from the site complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing MCB SPN,32 Amps, 240 volts, 10 KA 'C' Curve characteristics, including taking out old unserviceable Isolator & electrical connection and removal from the site complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing MCB SPN,40 Amps, 240 volts, 10 KA 'C' Curve characteristics, including taking out old unserviceable Isolator & electrical connection and removal from the site complete all as specified and directed. Make : Legrand/Indo asian (optipro)/ Schneider

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 2.5 Sq mm drawing in & including medium grade PVC concealed conduit pipe 20 mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 2.5 Sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed.Make for Pvc conduit -Plaza/Diplast/finolex Make for copper Cable -Havells/Grandlay cable/Polycab Note : Two run of wire and one run of earth wire shall be measured as one RM.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 4 Sq mm drawing in & including medium grade PVC concealed conduit pipe 20 mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 4.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed.Make for Pvc conduit -Plaza/Diplast/finolex Make for copper Cable -Havells/Grandlay cable/Polycab Note : Two run of wire and one run of earth wire shall be measured as one RM.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 6 Sq mm drawing in & including medium grade PVC concealed conduit 20mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 6 Sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed.Make for Pvc conduit -Plaza/Diplast/finolex Make for Cable -Cable -Havells/Grandlay cable/Polycab Note : Two run of wire and one run of earth wire shall be measured as one RM.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 10 Sq mm drawing in & including medium grade PVC concealed conduit 20mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 10 Sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed.Make for Pvc conduit -Plaza/Diplast/finolex Make for Cable -Cable -Havells/Grandlay cable/Polycab Note : Two run of wire and one run of earth wire shall be measured as one RM.

Supply and fixing for Renewal of earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI earth wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.3 of SSR Pt-I, connected to earthing lead upto main switch board/main board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit pre-cast RCC cover, charcoal/salt, funnel with wire mesh etc complete all as specified and directed by Engr-in-charge.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Material and labour for provide earthing pit cover made of RCC of size 450x450x40mm with handle 6 mm dia round bar and making good the earthing pit by mean excavation and refiing the earth around the pit complete all as specified.

Material and labour in repairs of Earth condinuity conductor Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above the ground complete incl. taking down all as specified and directed.

Material and labour in repairs of Earth condinuity conductor or main earth lead fixed to wall/roof/floor on batten/recess/GI pipe or chases with 32x6 mm galvanised iron strip complete all as specified and directed.

Material and labour in repairs of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drwan in conduit/pipe of fixed to poles or any other indicated situation for loop earthing etc. as required with copper strip of 20x3mm size complete incl. taking down all as specified and directed.

All as per item No 87 above but 4mm dia GI earth wire

Supply and fixing testing single pointed air termination aluminium rod 12 mm dia and 300 mm long complete all as specified and directed by Engr in charge.

Supply and fixing provision of Test point terminal block made of gun metal or phosphorus bronge size 75x75x25 mmdrilled and screwed including 3 nos 8mm dia 25 mm long hex. Head screw complete all as specified and directed.

Scraping of old paint from the lightening arrester of steel tubular pole 11 mtr height with out removing accessories and preparation of surfaces for repainting and repainting the pole with one coat of synthetic alumn paint . Marking the LA with black enamell paint. Repainting the remaining pole and iron parts i.e U clamps, chanels etc of all as required at site or directed.

Disconnecting and taking down the complete ceiling fan from ceiling hook/bolts/fan box any size/make/sweep from any OTM of technical Area and refixing after repairs/replacement of various component of ceiling fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of ceiling fan shall be measured and paid seperately against respective items). Note -The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and body of ceiling fan greasing, oiling of bearing/bushes is included in the quoted rate against this item.

Material ans labour for rewinding of motor of ceiling fan 1200/1400 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

Supply and Fixing Ball bearing suitable for 1200/1400 mm sweep ceiling fan of ball bearing N0 6201/6202/6203 complete all as specified and directed. make- SKF/NBC

Supply and fixing for replacement of bush made out of stainless steel approved make for Ceilling fan any sweep/size/model complete all as specified

Supply and fixing for replacement of hanging clamp (hanger) with nut/bolt and rubber bush suitable for mounting/hanging of ceiling fan any type/any size all as specified and directed.

Supply and fixing in replacement of sefty split pins of down rod of suitable size for any sweep make model of ceiling fans complete all as specified'

Material ans labour replacement of GI tubing 15 mm bore medium grade of any length (down rod) both end screwed , in length as required duly painted with white synthetic enamel paint suitable for any make/ size/sweep of ceiling fan all as specified and as directed.

Supply and fixing for replacement of capacitor 2.15/2.5 mfd for ceiling fans of any make /model/sweep, complete all as specified and directed .Make CG/Tibcon/EPCOS

Supply and fixing for scraping all foreign materials with emery paper, cleaning the body, blades and down rod (preparatory work) for painting ceiling fan with one coat of supper enameled white paint (spray paint) and writing of MES No. with capital letter of size 20 mm height and 03 mm width with synthetic enameled black paint all as directed.

Supply and fixing fan blade set (set of three) made out of MS iron sutaible for 1200 mm sweep ceiling fan, as per exisitng size and guage all directed by Engr-in-Charge Make : Usha/compton/orson

Supply and fixing in repair bottom cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.Make : Usha/compton/orson

Supply and fixing in repair top cover suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.Make : Usha/compton/orson

Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan any make.

Supply and fixing in repair stator suitable for 1200/1400 mm sweep of any make as required at site & directed by engr- in charge.Make : Usha/compton/orson

Disconnecting and taking down the complete Exhaust fan with bracket any size/any type form any OTM of technical area and refixing after repairs/replacement of various component of Exhuast fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of Exhaust fan shall be measured and paid seperately against respective items). Note -(i) The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and greasing, oiling of bearing/bushes is included in the quoted rate against this item. (ii) Material and labour for rewinding item No 107 to 108 shall be measured and paid

Materia and labour for rewinding of motor of exhaust fan 300 to 375 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

Materia and labour for rewinding of motor of exhaust fan 450 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

Supply and fixing for replacement of capacitor 3.15 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .Make CG/Tibcon/EPCOS

Supply and fixing for replacement of capacitor 4 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .Make CG/Tibcon/EPCOS

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 300 to 375 mm sweep single phase 230 volt completed all as directed by the Engr-in-Charge and as specified.

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 450 mm sweep single phase 230 volt completed all as directed by the Engr-in-Charge and as specified.

Supply and fixing for replacement of gun metal bush of approved make for exhaust fan any sweep/size/model complete all as specified

Supply and fixing for replacement of rubber pad sutaible for mounting exhaust fan any size complete all as specified

Supply and fixing for replacement of mounting brackets with nuts and bolts 300/350 mm size for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing for replacement of mounting brackets with nuts and bolts 450 mm for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing for rewinding of motor of wall mounted air circulating fan of 450 mm sweep any make with super enameled copper winding of appropriate gauge including replacement ocsillation knob, greasing and testing including taking down and refixing after rewinding complete all as specified and as directed.

Supply and fixing for replacement of blade assembly with locking nut and spinnner for wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of Mounting plate with screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of Rear and front grill locking screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of rotary knob with pull cord speed control of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Vasavi Electricals

Shanthi Construction

RAMESH BABU CO