Construction of Science Room at High School Ketson . Zone. Quilmuqam. District. Bandipora.

Earth work in excavation in foundation by mechanical means over areas (exceeding 30 cm in depth, upto 1.5 m depth, 1.50 m in width as well as 10 m2 on plan) including disposal of excavated earth upto 1 meters for cutting of edges, disposal earth to be leveled and neatly dressed. All kinds of soil

Providing and laying of hand packed boulders in foundation trenches including ramming watering all carriages of material involved complete job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering leadup to 50m and lift upto 1.5m complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including all cost and carriages involved.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Centering and shuttering including strutting, propping etc. and removal of form for:- i. Foundation , footings , base of columns etc for mass concrete

ii. Lintel , beams , plinth beams , girders , bressumers and cantilevers .

iii. Suspended floors, roofs, landings, balconies and access platforms.

Providing and fixing of wood work in frames of doors, window. Celestory windows, wrought framed of first class imported wood, including cost and carriage of materials etc complete job.

Providing and fixing of 40x5 mm flat iron hold fast including fixing of frames with nuts and bolts incl. cost and carriage of all materials involved complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Providing and applying of 12 mm Cement plaster of mix 1:6 ( 1 cement : 6 fine sand) including curing and all cost and carriages involved complete.

Providing & fixing paneled or paneled & glazed shutters for doors & windows and clerestory windows including ISI marked black enameled M.S Butt hinges with necessary screws excluding paneling imported wood .Including cost of carriage Etc complete

P/F of glass panes 3.50 mm thick including beading nails etc including cost of carriage and head loads complete

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on work including cost of carriage complete.

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. including cost of carriage and head load etc complete.

Providing and applying 2 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all carriages of material involved.

Structural steel work (welded) in built up sections, and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, all carriages of material involved & head load.

Providing colour coated high Rib GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers file with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick . all carriages of material involved.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including all cost and carriages invovled.

Finishing walls with water proof cement paint of approved brand and manufacture of required shade to give an even shade. New work ( two or more coats) applied @ 3.84kg/10sqm incl all carriages of material involved & head load etc complete.

Providing / Fixing of Hardware items including cost of carrriage involved complete . i. Handle 4"

ii. Tower bolt 6"

iii. Tower bolt 4"

iv. Handle 6"

v. L Drops 9"

vi. Lock

vii. Air Hooks

Providing & fixing paneling for shutters of doors of decorative prelaminated partical board with decorative laminations on both sides. Including cost of carrriage complete job

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including cost of carriage complete.

Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire, 6 amp on way switch 2 mm thick pvc conduit/ channel with bends junction boxes etc , 6 amp S pole MCB, 10 amp DP MCB , 2 way DB MCB and hylem sheet including cost of 8 watt LED bulbs etc complete job, incl. all cost & carriage of material involved.

Heating point (one Heating point includes wiring of lighting point in 2.5 sq.mm PVC insulated copper wire and 4.00 sq.mm PVC insulated multistrand copper wire, 16 amp on way switch 2 mm thick pvc conduit/ channel with bends junction boxes etc , 10 amp S pole MCB, 2 way DB MCB and hylem sheet etc complete job, incl. all cost & carriage of material involved.

Providing and fixing one fan point includes wiring for lighting points in 1.5 sqmm pvc insulated copper wire and 2.5 sqmm pvc in multi strand copper wire 1200 mm ceiling fan/ 225 exhaust fan with ceiling roses and pvc square block 350 watt electronic fan dimmer. 2 mm thick pvc conduit/channel with bends, junction boxes etc 6 Amp S pole MCB-10 amp DP MCB 2 way DB for housing MCB or ligting circuits and hylem sheet with wooden boxes recessed in wall with acccessories etc complete job incl all cost & carriages of material involved.

Carriage of material by mechnical Transport including ,oading, unloading complete for:- i. Sand average lead 20 km

ii. Bajri average lead 25 km

iii. Bricks average lead 85 km