Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID | |
| 2 | L2₹38.8 L+₹3.6 L (10.1%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID | |
| 3 | L3₹42.7 L+₹7.4 L (21.1%)Rejected-Finance 80 G T ROAD FEROZEPUR CANTT PB | L3 | Rejected-Finance DUE TO HIGHER BID | |
| 4 | L4₹46.2 L+₹11.0 L (31.1%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID | |
| 5 | L5₹47.3 L+₹12.0 L (34.1%)Rejected-Finance | L5 | Rejected-Finance DUE TO HIGHER BID |
Tender Value
₹47.9 L
EMD Value
₹95,800
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST FEROZEPUR CANTT
GE WEST FEROZEPUR CANTT
PROVN OF BLDG NO T1A T 1A AND T1 A1 SEWAGE LINE SEPTIC TANK FOR DISPOSAL OF WASTE WATER OF COOK HOUSE AND WASHING AREA AND OTHER SANCTIONED WORKS UNDER GE WEST FEROZEPUR CANTT
2022_MES_545341_1
802022/GE-62/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST FEROZEPUR CANTT
₹95,800
Yes
15 Sept 2022
16 Aug 2022
7 Sept 2022
16 Aug 2022
5 Sept 2022
30 Aug 2022
Amount
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..
Supply and fix factory made Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.
S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of Zinc Chromate primer complete all as specified
S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
Supply and fix Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.
Supply and fix Factory made 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats.
S&F Powder coated of ( any colour ) aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete all as specified as per manufacturers instructions. Note: EPDM Rubber beading/gasket measured and paid seperatley.
S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.
S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.
M&L PCC (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.
Cutting holes in brick wall buillt in cement mortor exc half Brick wall but nexc one brick wall for inserting holdfast ,angle and making good dismantled portion in cement mortar 1:3 complete all as specified and directed .
Supply and fix Factory made Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification
Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.
S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S&F 300mm Mild steel helical door spring including roller and roller plate complete all as specified.
S&F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed.
S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as speciifed.
S&F Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified.
S&F 100mm size, Extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified.
S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed.
S&F sheet glass,ordinary quantity,in squares exc 0.5 sqm each pane 5.5mm thick complete all as specified and directed.
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed by Engineer in Charge
S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.
S&F 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.
S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.
Dismantling wrought iron/mild steel work in any position complete all as specified and directed
S&F rolled mild steel section of grade FE-410W (Gde E 250 quality A ) as in steel post/pillars of any shape (rectangular square where connected to roof/ truss etc built up from two or ,more channel sections or agles with plates ,including all stiffeners,gusset plates etc.,
S&F of Stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, etc. completeconforming to Fe-410-W (Gde E-250) quality A.
Roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces,cleats etc Fe 410-W (Gde E-250) quality B complete all as specified and directed.
S&F Rolled sections as in post/pillars where connected with angle cleats or other connecting plates etc of Fe 410-W (Gde E-250) Quality 'B' including fabrication, erection and fixing complete all as specified and directed by Engr-in-Charge
S&F rolled mild steel plates Fe 410 -W (Gde-E- 250) quality- A(plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes without any attachment complete all as specified.
S&F Mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n exc 22.5cm long complete all as specified.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including ornamantal and intricate design
Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.
M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.
All as per item No. 43 but using old bricks retrieved from demolition under item 42 including cleaning and removal of mortar from old bricks.
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L Rendering 15mm thick on fair faces of brickwork or concrete surfaces 'in CM 1:4 finished even and fair using with water proofing compound and all as specified and directed. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.
Supply only integral water proofing compound complete all as directed.
M&L Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or conrete surfaces, surfaces finished fair and even without using extra cement complete all as specified & directred.
M&L Rendering 10mm thick on any faces of brickwork or concrete 'surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.
Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.
M&L Non skid ceramic coloured (colour & shade as approved) tiles (square or rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 all as specified and directed
M&L for glazed coloured designer ceramic tiles of size 450x350x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.
S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
S&F Vitrified ceramic tiles single Charged 10mm thick Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
M&L machine cut kota stone flooring 20-25mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified & directed.
M&L machine cut kota stone 20-25mm thick as in risers of steps, skirting, dado etc over & including 15mm thick rendering in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as spedified.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar
M & L Granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified.
M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
S & F machine pressed precast 60mm thick concrete interlocking paver block (M-35) cement concrete tiles with grey cement and no pigment of approved design & pattern as approved by GE, set over & including 50mm sand cushion complete all as specified and directed. Note :- Sand will be measured and paid seperately
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified.
M&L Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified & directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
All as per item No 67 above but 6 to 8 mm dia .
M & L for Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping, including necessary form work complete all as specified.
M & L PCC (1:2:4), type B-0 using 12.50mm graded stone aggregate as in filling of steel chowkhats complete all as specified.
M & L for reinforced Cement concrete (1:2:4), type B-1using 20mm graded stone aggregate in floors, roofs, landing, balconies, canopies, deck slabs and in shelves set in cement mortor 1:4 complete all as specified.
M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.
M&L Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.
S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
All as per item NO: 75, but 0.71mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified.
M&L for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.
M&L Preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed
M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.
M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.
M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.
M&L of for washing rubbing down and stopping of cement based painted surfaces and applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, even in foul position complete all as direced by Engr-in-Charge.
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.
Removing excavated material as soil n.exc. 50 m and depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.
M&L for Hard core100 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.
M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.
M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in flooring in , surface finished even and smooth without using extra cement complete all as directed.
Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection, sub base etc 50mm thick, surfaces finished even and smooth without using extra cement complete all as specified.
Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge
M&L 25 mm thick PCC type B-2 1:2:4 (20mm graded aggregate) as in floors all as specified
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified.
S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .
S & F in rep of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.
Excavation in post holes (or similar holes) each n exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth arouond in layers n.exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface in soft/loose soil.
M&L for PCC 1:3:6 type C-2(40mm graded aggregate)as in posts etc all as specified.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red lead primed steel surfaces complete all as specified.
Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.
All as per item No. 104 here in before but 20mm dia.
S&F 15 mm bore fancy type chromium plated stop cock cast copper alloy screwed down, high pressure screwed both ends for iron pipe or for unions of 15mm bore fixed in repairs complete all as specified .
S&F as in repair 15 mm bore fancy type bib taps long shank and cup cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.
S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.
125mm dia PTMT grating fixed over trap with cement complete all as specified.
S&F vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedestal pan complete.
S&F in repair vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets,complete.
S&F in repair CP fency type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed (Make : Parko/Prayag or equivalent) complete all as directed by Engineer-in-Charge
S&F Chromium plated brass fancy type Bib taps 15 mm dia bore type with cruth handle, screwed down, screwed for iron pipe or famale all as specified and directed.
S&F 15 mm bore fancy type chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.
S&F in repair 1 mm thick stainless steel plate racks of size 750x600x250mm all as specified and directed.
S&F in repair Vitreous china squatting pan ,Orissa pattern size 580X440mm white, with integral foot rests including including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor
S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.
S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F in repair PVC connection 15mm size PTMT nuts of length 450 mm.
S &F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and all specified and directed.
S & F in repair to CP towel ring square.Complete all as spd and directed by Engineer in Charge
S&F Health faucet with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook all as specified and directed by Engineer-in-Charge. Make:Jaquar cat No: ALD-CHR-585; Cera Cat NO:F8030103,Prayag No:1871
S&F 15mm dia Wash Hand Basin mixer (hot and Cold) (Table mounted Model) with extended spot type with 450mm braided connection pipe (Without POP UP) Make: CERA Cat No:F 3002581/Jaquar Cat NO:CQT-233321B
M&L CP toilet paper holder all as specified and directed.
S&F 50mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified.
S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.
Supply & fixing PVC cabinet with mirror of size 350x450mm any Colour with all fixing arrangements as per manufacturer instruction as fixed in repair and all as fixed and directed by Engineer-in-Charge.Make : PRAYAG.
S&F brass CP 20mm dia tabular towel rail, 600mm long between flanges and all as specified and directed.
M&L CP soap dish all as specified and directed.
S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.
Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.
S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.
S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.
S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.
S & F 500 Ltr Rotational moulded, triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.
Dismantling of PVC boarding of any description and in any position complete all as specified.
S & F 16mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE
S & F 18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE
S&F 75mm size, extruded aluminium anodized, handle and fixed with screws complete all as specified.
Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.
S & F 75 mm size butt hinges of medium weight cold rolled mild steel and fixed with steel screws complete all as specified.
S & F 125 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-22 complete all as specified.
Cleaning and removal of foreign material from inside the Gully trap including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete all as specified and directed.
Cleaning of existing manhole of any size including removing & re-covering of RCC/CI cover of depth not exc 1.5 mtr by bailing out water/sewage by mechanical pump or manually including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground complete including cleaning sewage line by rodding manhole to manhole complete all as diercted.
Cleaning of existing manhole of any size including removing & re-covering of RCC/CI cover of depth exc 1.5 but n. exc 3.00 mtr by bailing out water/sewage by mechanical pump or manually including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground complete including cleaning sewage line by rodding manhole to manhole complete all as diercted.
Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 200 mm complete all as directed.
Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 150 mm complete all as directed.
Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 200 mm complete all as directed.
Demolition and breaking of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia 150 mm complete all as directed.
M & L for PCC 1:3:6 type C2, (using 40 mm graded aggragate) as in concrete bed to 200 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as directed.
M & L for PCC 1:3:6 type C2, (using 40 mm graded aggragate) as in concrete bed to 150 mm bore drain pipe including packing under and hunching against the sides of pipes after pipe laid and tested complete all as directed.
M & L for 200 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.
M & L for 150 mm bore (internal dia of pipe) salt glazed stoneware drain pipe grade A laid in trenches and jointed complete all as directed.
Excavation in trenches not exc. 1.5 mtr wide and exc. 1.5 mtr but n.exc. 3.00 mtr depth for cesspits, manholes etc. and getting out soft/loose soil complete all as specified and as direcetd.
Exacavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as direcetd.
Exacavating over areas, exc 1.5 m but n exc 3.00 mtr deep and getting out in soft/loose soil complete all as specified and as direcetd.
Providing cement concrete type B1 1:2:4 (20 mm graded aggregate) as in copings to brick wall, kneelers,bedplates and all other similar works including necessary form work complete all as specified and directed.
M&L for PCC (1:3:6), type C2 (40 mm graded aggregate ) in foundation filling and mass concrete for bottom of manhole complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.
Cleaning of sewage pipe lines of dia exc 100mm and not exc. 250mm systematically by passing/rodding ropes,knots,bamboo/wire/kandi, rotary cleaning rods complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.
M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
(b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch.
(c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch.
All as per Item No 172 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
S & F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make - Anchor/Havells/Legrand
S & F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make - Anchor/Havells/Legrand
S & F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make - Anchor/Havells/Legrand
S & F in repair Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all asper specified and directed. Make - Anchor/Havells/Legrand
S & F in repair Modular white cover plate including GI box inner, 3 module complete all as per specified & directed. Make : Anchor/Havells/Legrand
S & F in repair Modular white cover plate including GI box inner, 4 modulecomplete all as per specified & directed. Make : Anchor/Havells/Legrand
S & F in repair Modular white cover plate including GI box inner, 6 module complete all as per specified &directed. Make : Anchor/Havells/Legrand
S & F in repair Modular white cover plate including GI box inner, 8 module complete all as per specified &directed. Make : Anchor/Havells/Legrand
S & F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Make - Anchor/Havells/Legrand
S & F Switch piano flush type 6 amps, one way complete all as specified and directed.
S & F Switch piano flush type 16 amps, one way complete all as specified and directed.
S & F Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed.
S & F Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and directed.
S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked.
Supply and fixing ceiling fans complete with blade, down rod,electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single phase 230 V of size 1300 mm sweep with blade and frame and louvers complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
Supply and Fixing wall mounting fan single phase 230 volt 400 mm sweep swing wall fan complete with all accessories. Make- Havells/Bajaj/CG
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed.
S&F Sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as directed.
Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series VTPN DBs IP 43 Protection fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.
Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.
S & F MCB single pole neutral(SPN) 240 volts, 40 Amps, 10 KA complete all as specified.
S & F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as specified.
Supply and fix decorative type garden pole light IP 65 rated LED bollard 10W with robust and efficient light distribution including provide all necessary connecting items complete all as specified and directed. Cat Part No. LBLSR-10-CDL of Crompton or equivalent of Havells/Philips
Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core complete all as specified and direced by Engr-in-Charge.
M & L for sand cushioning in trenches for UG cables all as specified and directed by Engr-in-charge.
M & L Bricks (Size 23x11.5x7.5 cm) common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable complete all as specified and direced by Engr-in-Charge.
M&L for providing PCC (1:2:4) type B1 (20 mm graded stone aggregate) for couping of pole including necessary form work as required complete all as specified and directed.
M&L for cutting the existing road straight by manual,depth & width not less than 30 cm for pipes up to 80mm dia, 40 mm & 25 mm for pipes up to 100 mm dia & filling back with excavated soil up to 75% road portion & 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified & diected. Note : During road cutting contracter will get the approvel from the stn HQ/Civil Authority for diversion the traffic .
M&L Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of cable laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.
M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2x6 sqmm drawn through in and including PVC Concealed with 1x6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core, one run of PVC conduit shall be measured as single run)
Supply & Fixing LED tube light fitting 18/20 Watts,4 feet long decorative ultra slim linear LED lighting fixture (White/Warm white) with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips
Supply and fixing of LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and directed.
Supply and fixing of LED Mirror light 7 Watt 2 ft adjustable type enegy saving curve type complete all as specified and direceted.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Cat No.LCTLRN-36-FO-CDL of Crompton
Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips
Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.
S & F bell push piano flush type 5 Amps single pole duly ISI marked.
S & F bell ding dong AC 230 volts single pole complete all as specified and directed
S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed. Make Havells
Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)
Supply & Fixing Socket outlet 2 in one , 5/6 Amps flush type ISI marked.
Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 16 Sqmm 2 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .