REPAIR/MAINT TO SECURITY FENCING, COMPOUND WALL, GATES AND CERTAIN OTHER MISC WORKS AT TECH AREA AF STN GWALIOR

Amount

Dismantling of posts, struts (wood, steel or RCC) any section including taking out embedded portion in concrete or brick masnory of any position place incl swan neck fencing and making good disturbed portion removing excavated debries up to a distance n.exc 50M complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description at any place not otherwise complete all as specified and directed.

Fixing only in repairs of 4mm dia chain link fencing, of mesh (50mmx50mm) size, of any type to angle iron with MS Flat Iron, and fencing will be strengthened by fixing MS flat/round bars horizontally complete all as specified and directed. Note: (i) S&F of FI, Angle, round bar & bolts shall be measured and paid separately. (ii) Supply only of chain link fencing shall be measured and paid separately.

Supply only galvanised steel chain link fencing of mesh size 50mmx50mm with both ends of the fabric without knocking and twisting any size complete all as specified and directed.

S&F flat Iron, mild steel for securing chain link fencing, wind tie, welded to each other incl all necessary fittings such as screws, bolts, nuts, fastners, holdfast etc complete all as specified and directed.

S&F 12mm dia round bar for securing/weaving for securing chain link fencing, cutting, welded to each other complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and including galvanised MS wire, staples or steel pin etc complete all as specified and directed. Note :- Each line of wire to be measured.

M&L for mild steel angle Iron fencing post including cutting and welding tops to shape as directed, drilling holes, notching for wire etc fillets including necessary drilling, bolting or riveting and similar works, conforming to Gde-165 complete all as specified and directed. Make: ISI/BIS Marked As approved By GE.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in foundation, filling fencing post and mass concrete, sub base finished even and smooth without using extra cement including necessary formwork complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for preparation of new steel surfaces n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete.

Taking down existing MS Steel Gates (each shutter not exc 5.0 sqm) from its position and refixing the same at its position after necessary easing, welding repairing cutting & straightening all bend section, old hinging arrangement and replace with new purpose made floor/wall hinge for the smooth functioning and applying two coat of synthetic enamel paint after preparation of surfaces. Note: Any steel section/ hinges used for the hinging device shall be paid under respective item of BoQ

Demolition of reinforced cement concrete (reinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel TMT bars of 10 mm dia and over cut to length, bent to shape as required including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for securing with clips complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other tubular hollow sections with necessary running welding with gusset plates, guide rails, braces, drilled etc including MS plate /MS sheet to be prepared for hanging or sliding gates and including hooks, hold fasts etc complete all as specified and directed.

M&L for purpose made heavy duty hinges, hasps and staples, sliding door bolt, solid wheels for sliding gates any size mild steel specially made for MS Gates/doors suitable for fixing etc complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded aggregate) as in shelves, cover slabs for manholes/drains etc set in cement mortar (1:6) including necessary form work and MES marking etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)

M&L for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in flooring /Hard standing, haunching, coping, and securing holdfasts including necessary form work complete all as specified and directed

M&L for 16-18 mm Granite (of any type) work rounded and polished at edegs as in Gate pillars, step, jambs, wall lining (veneering to wall), platforms & window cills etc in neat cement paste and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick plaster/screed in CM 1:4 all as specified and directed.

Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

M&L brick work with sub class 'B'old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 23 here-in-before but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

M&L for 15mm thick rendering on fair face of brick walls in CM (1:4) surface finished even and fair without using extra cement complete all as specified and directed.

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

M&L for Preparation of newly Plastered surfaces and applying three coats of white wash complete all as specified and directed.

M&L for stone walling of random rubble masonry uncourse, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

All as per item No 28 here-in-before but, except stone complete all as specified and directed. (Note :- Old retrieved stones obtained from demolition in serviceable condition shall be used in the work).

M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.

Racking out joints to random rubble or polygonal rubble uncoursed or brought up to courses and all as specified and directed.

Demolition of cement concrete (unreinforced) ground floors and pavings of any description and in any position n. exc 15 cm thick below or above G.L including removing and disposal complete all as specified and directed .

M&L for PCC (1:3:6) type C-1, (using 20 mm graded stone aggregate) as in surface channel and drain bed complete all as specified made to shape and size as directed complete all as specified and directed .

Extra for forming fair finish drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stooped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto..

M&L for 600mm bore reinforced concrete pipes class NP-2 ,laid and jointed complete with collars complete all as specified and directed including dismantling of old RCC pipe & necessary excavation complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipes class NP-2 ,laid and jointed complete with collars complete all as specified and directed including dismantling of old RCC pipe & necessary excavation complete all as specified and directed.

M&L for concrete bed to drain pipe incl packing under and completely surrounding pipes with cement concrete 1:3:6 mix, type C-2 (using 40mm graded stone aggregate)complete all as specified and directed.

M&L 100mm thick cement concrete 1:2:4 Type B1 ( using 20mm graded stone aggregates) as floors/ hardstanding complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 Type B1 ( using 40mm graded stone aggregates) as sub base for floors/hardstanding etc complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring/tiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/screed and ruibidh off the premises complete all as specified and directed..

M&L for 10 thick designer parking/footpath tiles of size exc 0.09 Sqm but n exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 15mm thick screed bed with bedding layer in CM (1:4) complete all as specified and directed. Make: DUROTA, JOHNSON (Endura), ORIENT ETC.

Dismentling Stone slabs and tiles, pavers of any description or thickness aid dry or pointed in floors, aprons etc complete all as specified and directed..

M&L for 60mm thick machine pressed precast coloured concrete interlocking paver block, Glossy finish any shape and size and colour confirming to IS 15658-2006, M-35 Grade with grey cement and pigment including filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Make: ISI Marked as approved by GE.

M&L for sand/stone dust filling under floor watering and levelling to receive pavour blocks complete all as specified and directed..

M&L for desilting/removing of earth/sludge deposits from drains/nallahas/trenches etc of any description in any position, getting out including removing drain covers before cleaning and refixing after cleaning in its position and and disposal completely out of premises all as specified and as directed

M&L for desilting/removing of earth/sludge deposits under culverts/hume pipe/underpass up to 0.30mm thick etc manually /mechanically of any description & in any position, getting out and disposal complete all as specified and as directed. (Note:- Nature of sludge/silt/earth deposits in the drains/nallahas is soft/ loose and sandy soil).

S&F in repair concertina coil size exc 600mm in one rows between the double layer fencing including all fixing arrangement complete all as specified and as directed.

S&F in repair concertina coil size n exc 600mm in one rows between the double layer fencing including all fixing arrangement complete all as specified and as directed.

Taking down existing concertina coil any discription any size kept aside safely and refixing the same in its position care fully after repairing work of connecting chainlink fencing/Security wall fencing all as specified and directed.

M&L for preparing old painted steel & iron surfaces like fencing posts, Gates & Parking sheds etc over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling the cracks/depressions with putty/POP and applying two coats of exterior emulsion paint over acoat of primer afer prepration white or tinted complete all as specified and directed. Make:-ACE of Asian Paints, Wallmasta of Berger Paints or Siraksha of Narolac Paints

M&L for Preparation of old decorated surfaces of wall including removal of old loose layers by steel scrapers, brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and prepare the surface by filling the cracks/ depressions with wall putty/POP to make the surface even and smooth and applying two coats of exterior emulsion weather coat in camouflaging pattern on CCD scheme (Pattern as approved by GE & User) on surfaces of any type of buildings up to any height, including necessary scaffolding complete all as specified and directed.

J.N.R. Engineers and Builders

M/s Anjali Construction

M/s NILAY ENGINEERS

M/s Gulshan and Brothers

M/S YOGANSH CONSTRUCTION CO.

m/s vikash Engineers

SHRI RAM CONSTRUCTION

lodhi builders

M/S LAKSHYA CONSTRUCTIONS