Modification of Conference Room And Two Other Rooms at Floor No. 5 and 6 (Technical Building). Job No. 948/DPPS.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Removing old scales, blisters etc. of interior surface of walls, ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge).

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. i)Water based interior grade Acrylic Primer (a) One Coat.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two coats) : plastered surface iv) Two coats (i) Luxury Quality).

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.

Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, anodized conforming to IS:1868 1983, fitted with all other accessories viz. EPDM gasket, cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with 4mm thick solid ACP board (weight not less than 5.50 kg/SqM ) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Anodizing film. Natural white. a) For unsupported length of vertical member up to 1.50 m. height of both ends of vertical member restrained but panel within 0.90 sqm. unit wt. of Top, bottom & side member @1.366kg/m; intermediate member @ 1.443 kg/m; glazing clip: 0.167 kg/m respectively).

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming toIS:732-1983 and IS:1285-1975; Anodized (with required film thickness and specified colour/natural ) matt finished conforming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer -In Charge. (A) In 10-12 Micron thickness Annodizing film (I) Natural white k) Movable door shutter. i) Door frame. (Top & sides).

ii) Shutter: Top Rail.

Bottom Rail.

Lock Rail.

Door vertical.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (d) Sal: Local.