CWE/P-12/2020-21 SPECIAL REPAIR TO CAPT MD ACCN BLOCK NO P-124 AT JANGLOT UNDER GE BASOLI

Amount

M & L for roof treatment with the following specification :- (a) Removal of existing old treatment of any type including PCC padding and roughening surfaces of old concrete by picking, sweeping, clean and washing down with water, apply neat cement slurry @ 3 Kg/sqm and 20 mm thick rendering in cement mortar 1:4, including mixed with liquid water proofing admixture @ 200 ml per bag of cement. (c) Applying water proofing membrane APP (Atactic Polyprobhlene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.5 kg/sqm and thickness not less than 3 mm, laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces complete all as specified and directed

M & L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding of average thickness 50mm, and finishing the surfaces even & fair without using extra cement, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.

Dismantling of floor hearth and wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

M&L light shade vitrified ceramic tiles10 mm thick (square / rectagular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

M&L Glazed ceramic coloured tiles in skirting/dado 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as in backing coat rough finished surface complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including taking out hold fast complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each including taking out hold fast complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M & L Plain cement concrete 1:3:6 type C-1(using 20mm graded crushed stone aggregate) as in back filling hollow of frame , complete all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified and shown in relevant drg

M & L factory made solid PVC moulded door shutter with Wood Free EPS. 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet onthe front face and 2 mm prelam colour PVC sheet on back face & fixing in frame at site as per specification & drawing

S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 size of hinges 100 mm, complete all as specified and directed.

S & F 30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all as specified.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated including one coat of pink primer all as specified.

M & L steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings, 10mm square bar grills and one shop coat of red oxide primer all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as specified and directed by Engr-in-Charge.

M&L Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

M&L 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

M&L 4.00 mm thick frosted glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

S & F Butt hinges, mild steel cold rolled and fixed 75 mm, complete all as specified and directed.

Supply and fix hasp and staple of size 100 mm, aluminium anodised, including bolt to hinge plate and fixed with screws.complete all as specified and directed.

S & F extruded aluminium alloy handles, fabricated type, anodised of size 125mm and fixed, complete all as specified and directed.

S & F Aluminium anodised, barrel tower bolts of extruded section of size 200mm and fixed, complete all as specified and directed.

S & F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixed, all as specified and directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Material and labour rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including mixing water proofing compound as per manufacturere's instructions finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separetely

M&L rendering 05 mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound. complete all as specified and directed.

M & L Taking down , dismantling of broken/loose portion of chajja, facia upto 450 mm wide and making good the surface with cement mortar 1:3 or PCC 1:1.5: 3 including necessary formwork/scaffolding and matching with existing surface of facia (including white/colour wash or cement base paint ) upto 1st floor complete all as specified and directed by Engr-in-charge

M & L 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays,complete all as specified and as directed.

M & L Complete removal of existing treatment for internal surface of wall by steel wire brush and filling hole and crack with cement mortar 1:3 to obtain smooth/regular finish using sand paper and applying cement based 3mm thick wall care putty and two coat of oil bound distemper complete all as specified

M & L Complete removal of existing treatment for external surface of wall by steel wire brush and filling hole and crack with cement mortar 1:3 to obtain smooth/regular finish using sand paper and applying two coat of cement base paint over a coat of primer complete all as specified

M & L Preparation of old decorated surface of ceiling & applying one coats of white wash complete all as specified.

M & L Preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M& L applying three coats of white wash including prparation of newly plastered surfaces of ceiling complete all as specified.

M & L Preparation of new plastered surface of wall and applying a coat of primer and two coat of oil bound distemper complete all as specified

M & L Two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Preparation new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE complete all as specified.

Preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in complete all as specified.

M&L 15 to 20 mm thick granite (of approved type black colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified. Note: (a) Rate will also includes for necessary raking, circular cutting ot notching and waste on Granite for fixing of W. H. B counter top/cooking platform counter top.

S & F in repairs, PVC valve less symphonic action type flushing cistern 10 ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed, complete all as specified and directed.

Supply and fix in repairs vitreous china Wash hand basin, white with pedestal , flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc , complete all as specified.

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed

S & F in repairs, Vitreous china squatting pan (Orissa pattern) with integral foot rest ISI marked size 580 x 440 mm, white, including trap set, PCC bed and making good disturbed floor complete, all as specified and as directed.

Supply and fixing in repairs, bib taps,cast copper alloy, fancy type, chromium plated with capstan head and cup screwed down for iron pipe 15 mm bore, complete all as specified.

S & F in repairs 15 mm dia Stop valves, cast copper alloy, chromium plated , fancy type screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fixing in repairs, concealed stop cock, fancy type , chromium plated with long shank and cup , screwed down, high pressure, with capstan head, screwed both ends for iron pipe of 15mm bore, complete all as specified and directed.

Supply and fixing in repairs, brass CP mixer for mixing hot & cold water screwed down for iron pipe for bore of pipe 15 mm complete all as specified and directed.

S & F 20mm bore gun metal globe or gate valve (ISI marked) iron wheel head,screwed both ends for iron pipe complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20mm grade crushed stone agregate as in shelves of size as per site requirement or as directed by Engr-in-Charge including necessary formwork complete all as specified and directed.

M & L TMT bars, 8mm dia , cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

M&L Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

M & L Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

M & L in repairs mild steel peg set of six hooks size 50mm to 60mm complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

M & L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified.

S & F PVC connection 15mm size with PTMT nuts on both ends of length 450mm , screwed for iron pipe of 15mm bore complete all as specified.

S & F brass chromium plated shower rose 125 mm size complete all as specified and directed.

S&F chromium plated brass Soap Dish ISI marked fixed with and incl chromium plated screws of as approved complete all as specified and directed by Engr-in-Charge. Make: Jainko Cat Part No. SDJ 1/Jaquar cat Part No AQN-7731/ Cera Cat Part No CA-206

S&F Three tiers glass shelf assembly with brass frame of chrome matt finish , with all manufacturer's accessories complete all as specified and directed by Engr-in-Charge Make: Jainko Cat Part No. CSJ 3 /Jaquar cat Part No ACN-1173/ Cera Cat Part No CA-502

Dismantling/ taking down of cast iron or unrienforced concrete or PVC soli waste and drain pipe upto 110 mm dia with all fittings complete all as specified and directed

M & L PVC (SWR) pipes 75 mm dia any length single socketed with rubber ring joint, fixed to floor or trenches as soil pipe(vent pipe), complete all as specified and directed.

M & L PVC (SWR) pipes 75 mm dia any length single socketed with rubber ring joint, fixed to walls as soil pipe(vent pipe), complete all as specified and directed.

M & L PVC (SWR) pipes 110 mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe(vent pipe), complete all as specified and directed.

M & L PVC (SWR) pipes 110 mm dia any length single socketed with rubber ring joint, fixed to walls as soil pipe(vent pipe), complete all as specified and directed.

M & L 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

M & L 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

M & L PVC (SWR) junction single, (Single T), 110 mm bore , equal or unequal provided with access door complete all as specified and directed.

M & L PVC (SWR) junction single, (Single T), 75 mm bore , equal or unequal provided with access door complete all as specified and directed.

M & L PVC (SWR) reducers , 110 mm bore complete all as specified and directed.

M & L PVC (SWR) floor trap, 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed.

M & L 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S & F 300mm ordinary rat tail mild steel rod pattern springs including roller and roller plate complete all as specified and directed.

S & F Cast iron body door closer hydraulically regulated, designation No 3, universal typesuitable for door shutters of weight between 61 to 80 kg complete all as specified and directed.

S & F Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified.

M&L 20mm thick UV coated mediun density PVC board prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cup board shutters, frame and shelves, complete all as specified.

M & L stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed, complete all as specified.

Supply and fxing in repairs stainless steel kitchen plate rack of size 900 x 900 x 225 mm dia (ISI Marked) all as specified.

Supply and fix in repairs coloured (other than black) rotational moulded polythene water storage tank tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug and including brass ball valve 20mm, high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Supply and fxing 25 mm dia Curtain rails (ISI marked), mild steel chromium plated wih fixing brackets, stops, rollers etc. all as specified.

M & L continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each, complete all as specified and directed.

M&L machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Sqm, including rubbing and mirror polishing including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L Kota stone slab 16 to 18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & including rendering 10mm thick cement plaster 1:4 to receive kota stone complete aggregate all as specified & directed.

S & F Coloured chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 15mm thick screed bed in cement mortar 1:4,complete all as specified and directed.

M & L tera kota tiling 10 mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in Chajjas including over 15 mm thick screed bed in cement mortar 1:4 complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified.

M&L PCC 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregates) as in copings, ,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 99 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 99 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 99 here in before but for one bell/buzzer point controlled by one bell push button on same board with other switch or independentwith cable 1.5 Sqmm size all as specified and directed.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L modular switch 1 way 6A, 1 module, complete all as specifed.

M&L modular push bell switch 1 way 6A, 1 module, complete all as specifed.

M&L modular switch 1 way 16A, 1 module, complete all as specifed.

M&L modular socket 6A- 2/3 pin combine 2 module, complete all as specifed.

M&L modular socket 6A/16A- 2/3 pin combine 2 module, complete all as specifed.

M&L Ceiling rose, 3 phase/bakelite 65x50mm two or three therminals isolated body fixed on PVC round block complete all as specified.

M & L bell multi music type 230 volts AC supply all as specified and directed by Engineer-in-Charge.

S&F fan step regulator, 120 W- 2 module for ceiling fan 1200/1400 mm sweep complete all as specified.

S&F Lamp holder PVC/Polycarbonate type with back plate having matching colour to holder for angle/batten fittings (ISI marked) complete all as specified and directed.

S & F LED Tube light fitting 20 watt , 230 volts,box type complete with bipin holders,connector block and retro LED rod of 20 Watt, 4 feet long with aluminium housing provided for efficient heat dissipation with polycarbonate diffuser having high efficacy (double side connection) complete with all accessories internally prewired batten (double side connection) and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings ,complete all as specified and directed. Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 2 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange arrange 70% material at site for approval of GE before incorporation in the work.

S&F in replacement LED ceiling light fittings flush Mount ceiling light fixtures including (BL 20 W Round LED down light), lamp holder etc connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

S&F in replacement LED bulkhead fitting luminaries with opla diffuser including (LED lamp type 10 watt LED 6000 K), lamp holder etc connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified and directed.

M&L Sheet metal enclosure factory made (Double door) for DBs, Tripple pole and neutral, 415 volts, 50 Hz, 8 way with 200Amps rated copper bus bar, neutral link, earth bar and din rail fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

Supply & Fix Ceiling fan AC single phase 230/240 volts of size 1200 mm sweep complete type BEE 5 star rated including blade ,down rod etc including connecting to ceiling rose all as required or directed . Note: Test report and Warranty certificate from OEM for minimum 2 years to be submitted before claiming for payment.

Supply & Fix Exhaust fan AC sinlge phase 230/240 volts of size 300 mm sweep steel body with louvre including connecting to ceiling rose all as required or directed including connecting to ceiling rose all as required or directed.including dismentling old unsv and depositing to MES storeyard.

S&F Geyser 25 Ltrs capacity, 230 volts, vertical type , BEE with 5 stars rating incl necessay drilling, provn of anchor bolts of suitable size and making electrical connections complete all as directed by Engr-in-charge. Make: Model "monza-ec" of Havells or equivalent models of Bajaj/ Racold/ Usha Lexus/ Voltas

M&L MCB TPN 63 Amp, 415V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F Sheet metal enclosure powder coated factory made (Double door) for DBs, single pole and neutral, 240 volts, 50 Hz, 08 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

M & L MCB SPN 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S & F in repairs MCB SP 6 to 32 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.

Supply and laying in repairs of existing circuit/submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of adequate size and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size wiil be measured as a one unit.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

Supply laying jointing and testing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core complete all as specified. Note : Earth work , sand cushioning, GI pipe , brick covering for mechanical protection will be measured and paid separately under respective item of Schedule.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation laying poles, stay assembly and laying of LT/HT cables in any type of soil and getting out, complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed. Make -Trupati /Equivalent

M & L GI pipe medium grade 50 mm bore with all fittings for cable protection fixed to walls/ poles or laid in trenches, under road/ under culvert/ under path/ under floor /on wall etc with fixing clamps, nuts bolts etc all as specified.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

Standard engineers

Neeraj Enterprises