Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹49.9 L+₹6.0 L (13.6%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹95,400
Closing Date
25 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri GanganagarCantt Rajasthan-335001
SPL REPAIR TO BLDG NO P-169 AND BLDG NO P-294 AT MIL STN SRI GANGANAGAR
2023_MES_625495_1
GE SGNR/TOK-55 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Sri Ganganagar(Raj)
D Class a(i) and b(i) and for un-enlisted, refer NIT para 8.
7 documents required · 7 mandatory
₹500
GE Sri Ganganagar
₹95,400
Yes
29 Dec 2023
28 Oct 2023
27 Nov 2023
28 Oct 2023
25 Nov 2023
11 Nov 2023
Amount
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engineer - in - Charge.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified and directed by Engineer - in - Charge.
Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening ,adjusting & removal of old colour with grinding and priming the surface with filling cracks & joints with putty complete all as specified & directed by Engr in Charge.
Supply & fixing Factory made prefabricated Pressed steel Door frame made out of mild steel 1.25mm thick girth of frame 185mm including necessary MS rawl plug/bolts and fixing 75mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with Locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm (Make Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8 mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not -visible from front) and hammer tone paint on exterior surface ( visible from front) as per Godrej Pattern complete all as specified and as directed by Engineer-in-charge.
S&F factory made Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engineer - in - Charge.
S&F factory made for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed by Engineer - in - Charge.
M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and directed by Engineer - in - Charge.
S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.
S&F 2nd class hardwood factory madeGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters supplied and fitted to chowkats, but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed by Engineer - in - Charge.
S&F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer - in - Charge.
M&L for Plain fillets or beading of sectional area Exc 3 & n. exc 6 sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar works put together with glue pinned at joints in complete all as specified and directed by Engineer - in - Charge.
S&F for factory made Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and directed by Engineer - in - Charge.
S&F butt hinges of size 100 mm "medium weight", stainless steel ISI marked for FRP frames complete all as specified and directed by Engineer - in - Charge.
S&F butt hinges of size 100 mm medium weight, mild steel ISI marked complete all as specified and directed by Engineer - in - Charge.
S&F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge.
S&F in repair butt hinges of size 50 mm medium weight, mild steel ISI marked for door knobs complete all as specified and directed by Engineer - in - Charge.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed by Engineer - in - Charge.
S& F aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified and directed by Engineer - in - Charge.
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer - in - Charge.
S&F in repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer - in - Charge.
S&F 250 mm long mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engineer - in - Charge.
S&F in repair 250 mm long mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engineer - in - Charge.
S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge.
S&F 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.
S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, articles of 2nd class hardwood, articles not exc 200 cu.cm each complete all as specified and directed by Engineer - in - Charge.
S&F 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed by Engineer - in - Charge.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge.
S & F hasp and staple, safety type of aluminium anodised100mm size fixed with screw complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified and directed by Engineer - in - Charge.
M&L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old painted surfaces including as knotting, stopping, Burning off or removing, scraping etc,and then applying two coats of synthetic enamel paint (ordinary tint) on old steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge.
M & L for applying two coat of synthetic enamel paint on old wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces complete all as specified and directed by Engineer-in-Charge.
Dismantling of boarding any description fixed in any position with nails/ screws complete all as specified.
M&L for block board, 18/19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in cup board shutter/shelves/cabinet etc, complete all as specified and directed.
M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.
S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed by Engineer - in - Charge.
S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws complete all as specified and directed by Engineer - in - Charge.
M&L for Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed by Engineer - in - Charge.
M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge
S&F Aluminium window (glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with Tower bolt 100 mm (02 Nos) powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: The Glass and wiremesh will be measured and paid seperately.
S&F Alumunium powder coated ventilator including frame and shutter including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) with Tower bolt 100 mm (01 Nos) powder coating of any colour (thickness of powder coating not less than 50micron)etc complete all as specified and directed by Engineer - in - Charge. Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items .
S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified and directed by Engineer - in - Charge.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer - in - Charge.
M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed by Engineer - in - Charge.
All as per item above but pin head type, figured glass complete all as specified and directed by Engineer - in - Charge.
S&F Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Roughning of surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engineer-in-Charge.
M & L for Non Skid ceramic coloured tiles 7 to 8 mm thick square area of each tile exceeding 0.18 but not exceeding 0.38 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed bed) in cement mortar (1:6) and finish the surface rough to receive the tile complete all as specified and directed by Engineer-in-Charge.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, cut to reqd size and shape as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down plaster complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed by Engineer - in - Charge.
M&L for 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engineer - in - Charge. Note :- Rendering will be done in course sand (Toka sand) only
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engineer - in - Charge.
M&L glazed ceramic coloured tiles grade, (300x600)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer - in - Charge.
Material and labour 20mm thickness approved shade granite of minimum size equal to width of slab (not less than 610mm) machine cut, granite duly factory grinding and polishing and chamfering the outer edges (table rubbed and mirror polished) as in cooking platform and like laid over and including 15mm thick cement mortar (1:4) screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including accomodate the hole for gas pipe complete all as specified and as directed by Engineer-in-Charge.
M&L, Machine cut kota stone slab flooring, cills 18 to 20mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete used in a single pieces in steps osf stair case complete all as specified and directed by Engineer - in - Charge.
M&L, Kota stone slab 18 to 20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including taking down plaster complete all as specified and directed by Engineer - in - Charge.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer - in - Charge.
Water proofing treatment to sunken slab and adjjoining vertical surfaces complete all as specified and directed by Engineer-in-charge ad under :- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.
M&L for water proofing treatment to RCC sunken slab as specified below asd as directed by engr-in-charge:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer. NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.
Providing and applying APP based polymeric memberane minimum 3mm thick reinforced with polyster with non wove fabric (wt n. Less than 150gm/Sqm) land on primed surface by forced application keep ovelap margin for minimum 100mm both the smoothened and pressed into seam using overlap excess compound should be smoothened and pressed into seam using hot trowel including and applying one coat of solvent based bitumen primer @ 0.50 Kg/Sqm evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces with wire brush/coir, brush to free from all loose materials like dust, durt etc and make wattah/coving of 5 x75 mm with PCC 1:2:4 type B1 at all horizontal and vertical joints to avoid right angle turning complete all as specified and directed by Engr-in- charge.
Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified and directed by Engineer - in - Charge.
M&L for PCC 1:5:10, type E-2 using 40 mm graded stone aggregate as filling of sunken floors complete all as specified and diredted by Engineer-in- charge..
M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed by Engineer - in - Charge.
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where complete all as specified and directed by Engineer - in - Charge.
Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where complete all as specified and directed by Engineer - in - Charge.
M & L for cleaning of old Roof wall/ concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed by Engineer-in-Charge.
M&L for cement concerete type C2 1:3:6 (40mm graded aggrigate) as in filling and mass concerete etc complete all as specified and dirceted by Engineer-In-Charge.
M&L for Cement concrete tiles 25cmx25cmx22mm thick,machine pressed ; set, jointed and pointed in neat cement slurry in roof terrace, and cut and polished including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified and directed by Engineer - in - Charge.
M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick over a truly rammed surface as in sub base, floors and pavings, plinth protection complete all as specified and directed by Engineer - in - Charge. .
M&L for PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified and directed by Engineer -in -Charge.
M&L for PCC 1:2:4 type B2(20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer - in - Charge.
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing complete all as specified and directed by Engineer - in - Charge.
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engineer - in - Charge.
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing complete all as specified and directed by Engineer - in - Charge.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engineer - in - Charge.
Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing complete all as specified and directed by Engineer in chgarge.
S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed by Engineer - in - Charge.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer - in - Charge.
M&L for providing cement concrete 1:2:4 Type B1 using 20 mm graded aggregate for platforms of water tanks on roof, as in coping, benching kerb concrete etc including weathing slightly rounded or chamfered angles and throating including necessary formwork etc all complete all as specified and directed by Engineer - in - Charge.
Dismantling water tanks of any description exc 250 and n.exc 1000 ltrs capacityand removal from site complete all as specified and directed by Engineer - in - Charge.
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.
S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer - in - Charge.
S&F 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engineer - in - Charge.
S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and as directed.
S&F in repairs, stop valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed by Engineer - in - Charge.
S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer - in - Charge.
S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed by Engineer - in - Charge.
S&F in repairs soap dish of any size fixed with screws complete all as specified and directed by Engineer - in - Charge.
S&F in repairs grating doom 100 mm dia of stailess steel with and without hole complete all as specified and directed by Engineer - in - Charge.
S&F in repairs stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed by Engineer - in - Charge.
S&F Stainless Steel grating 100mm dia without hole (Minimium weight 25 grams) complete all as specified and directed by Engineer - in - Charge.
S&F in repair sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer - in - Charge.
S&F in repairs corner wash hand basin of size 450 x 390 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer - in - Charge.
S&F in repairs cabinet of PTMT with looking mirror of size 450x600mm complete all as specified and directed by Engineer-in-charge.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer - in - Charge.
S & F in repairs PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engineer - in - Charge.
S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.
S&F in repairs brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer - in - Charge.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engineer - in - Charge.
S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer - in - Charge.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer - in - Charge.
S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engineer - in - Charge.
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as complete all as specified and directed by Engineer - in - Charge.
S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.
M&L for 25mm dia fancy type PVC coated MS Pipe ivory coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed by Engineer - in - Charge.. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
Dismantling and disconnecting existing CI soil waste/vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer - in - Charge.
Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairss complete all as specified and directed by Engineer - in - Charge.
S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairss complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engineer - in - Charge.
M&L Branch pieces, 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
M&L Branch pieces, 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge.
M&L Bends suitable for 100mm dia CI pipe with duck's foot or heel rest as in repairs complete all as specified and directed by Engineer-in-Charge
M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complete all as specified and directed by Engineer - in - Charge.
M&L for extra Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed by Engineer - in - Charge.
M&L for extra Joints over cast iron pipe of 75 mm bore pipes, bend joints. etc is provided lead joints in lieu of cement joint, complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 100 mm CI connection socket to fit out let of WC complete all as specified and directed by Engineer - in - Charge.
S&F in CI cowls 100 mm complete all as specified and directed by Engineer - in - Charge.
Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified and directed by Engineer - in - Charge.
Returning filling in including spreading, levelling, watering & well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer - in - Charge.
Removal of excavated material to a distance exceeding 250m & deposited where directed at level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer - in - Charge.
M&L PCC 1:3:6 type C-2 using 40mm graded stone agg as in conc bed to drain pipe including packing under & haunching against the sides of pipe 150 mm dia ( internal) after these are laid in trenches complete all as specified and directed by Engineer - in - Charge.
Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm. complete all as specified and directed by Engineer - in - Charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer - in - Charge.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed by Engineer - in - Charge.
M&L for rendering 15 mm thick in cement mortar 1:4 (10mm thick rendering in first layer and 5 mm thick rendering in second layer)on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge. Note : - Supply only water proofing compound shall be measured and paid for separately.
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed by Engineer - in - Charge.
M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) M&L wall care putty in two coats on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified and directed by Engineer - in - Charge. (b) M&L two coat of interior acrylic emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified and directed by Engineer - in - Charge. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible .
M&L for prepration of New external plastered wall surface complete all as specified complete all as specified and applyingthe following :- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of exterior acylic emulsion by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified . Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible.
M&L for prepration of New plastered ceiling surface complete applying the following :- (a) M&L wall care putty in two coats on ceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified and directed by Engineer - in - Charge. (b) M&L two coat of interior acrylic emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified and directed by Engineer - in - Charge.
M&L for complete removal of existing treatment including filling depression of scraped surface with wall care putty in two coats on old internal wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of interior acrylic emulsion of approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified and directed by Engineer - in - Charge.. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible .
M&L for complete removal of existing treatment including filling depression of scraped surface with wall care putty in two coats on oldceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of interior acrylic emulsion of approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified & directed.
M&L for complete removal of existing surface finishes of wall and applying two coat of white wash on old plasterd wall surfaces etc complete all as specified.
M&L for complete removal of existing treatment including filling depression of scraped surface with wall putty two coats 1.5 mm thick each on Old external wall surfaces of any desciption , prepratio of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following :- (a) M&L two coats of exterior acylic emulsion by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible
M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.
M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.
Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition).
M&L for reinforced cement concrete type M-25(20 mm graded stone aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge.
M & L RCC M25 (20mm graded stone aggregate) design mix as in beams,cantileavers,bressummers,lintel over 1.50m span complete all as specified and directed by Engineer - in - Charge.
M & L RCC M25 (20mm graded stone aggregate) design mix as in chajja complete all as specified and directed by Engineer - in - Charge.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer - in - Charge.
M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer - in - Charge.
Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engineer - in - Charge.
Formwork to sides and soffits of lintels & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and directed by Engineer - in - Charge.
Formwork to chajjas, troughs and similar items including edges for rough finished surface of concrete complete all as specified and directed by Engineer - in - Charge.
M&L for Shotcreting average thickness 25mm in RCC columns, beams and slab etc. (with mix minimum cement content of 350 Kg per Cum, M-25). Concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6mm to 10mm size in proportion as per design criteria) incl the cost of centering and shuttering at edges and corner etc as directed by Engr-in-Charge incl chipping of unsound/week concrete material 25mm average thickness from slabs, beams/columns etc with mannual Chisel or standard power driven percussion type all of approved makes incl tapering of all edges, making square shoulder of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removel of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron as per manufacturer's instruction and specification, including removing rubbish material from building and thrown in low lying empty area at any distance from the site as directed complete as specified and as directed by Engineer-in-Charge. Make :- Sika / Fosroc/Pidilite or Techno commercial equivalent make approved by GE in writing from E-in-C's approved list. Note : Complete treatment to be executed by approved applicator.
Supply and fixing hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer - in - Charge.
Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and directed by Engineer - in - Charge.
Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus ~ 2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement: per kg of material consumed Make: Sika - SikaDur 52 LP/ Fosroc- Conbextra EP 10/ Pidilite Dr Fixit Epoxy Injection Grout or equivalent make approved by GE in writing from E-in-Cs Br approved list.
Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
M&L half brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick PCC as in sub base of floor/path type D-2 (1:4:8) (40mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.
M&L for Machine pressed Precast cement concrete interlocking coloured ( glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 40mm thick sand cushining complete all as specified and directed by Engr-in-charge.
M&L providing and fixing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in Kerb Stone of any section indicated with plain fair faces including chamfers weatherings throughting etc and setting in CM (1:4) complete with joints to match all as specified and directed by Engineer-in-Charge.
S &F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F steel work in tubular trusses or (round pipe used for purlins,vertical post etc for shed)including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to is.1161-1998 grade St-240 all as specified and directed by Engineer-in-Charge.
M&L for Mild steel work as ISMB,joists channel,angle or tee section fixed adjacent to ceiling and embedding in floor and brickwork including cutting welding and the like including caps.bases,splices etc,built from one or more beam or channel section or angle with plates including all lattice bars, stiffeners,gusset plates including necessary welding,rivetting etc.confirming to Fe 410 (Gde E-250) quality A etc complete all as specified and directed by Engineer - in - Charge.
M&L for 25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.
S&F Aluminum Grill of approved design/pattern with aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engr-in-charge.
S&F in repair water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap all as specified and directed by Engr-in-charge.
S&F, in repair vitreous china wash hand basin bowl type, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts.
S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge.
Supply only pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer in charge.
S&F hat pegs and hooks (cloth hanger with five peg set each) complete all as specified.
S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
M&L for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge.
M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap and including jet spray/nozzle with pvc pipe 15mm bore dia complete all as specified and directed by engr-in-charge.
S&F in repairs vitreous china urinals, Full stall type flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Eng in charge.
S&F Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer in charge.
M&L for granite (of any type) 20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges (moulding of edges) and polishing complete laid over 15 mm thick screed bed in CM 1:4 etc all as specified and directed by Engineer in charge.
M&L brick work with fly Ash old size Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.
M&L three coats of white wash on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of cement base paint over and including a coat of priming with alkali resistant primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M & L two coat of distemper oil emulsion on old decorated plastered wall over and including one coat of chalk whiting as in priming surface with complete removal of existing treatment of walls complete all as specified and directed by Engineer - in - Charge
M&L two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L two coat of cement base paint on old decorated surfaces of walls including complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes suitable length and thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.
All as per Srl item No -204 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No -204 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 204 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
All as Srl item No. 204 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.
All as Srl item No. 204 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.
S & F switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed by Engineer – in - Charge.
S & F bell push flush type 5 Amp complete all as specified and directed by Engineer – in - Charge.
S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S & F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.
S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified.
S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S&F in replacement decorative wall light fixture made up of poly carbonate suitable for 10 watt LED lamp complete all as specified and directed by Engineer - in - Charge.
S & F in replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery (new pattern) with 10 Watt LED strip light all as specified and directed by Engineer - in - Charge .
S&F in replacement MCB protected Socket -25Amps in renewal with plastic box and plug top vertical din rail mount type suitable to operate at 240V current rating range 25A , 50Hz 1Ph, complied IS specification 13032 & 8623 complete all as Spd and directed by Engineer in Charge .
S & F stepped type,single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in concealed PVC conduict dia 20mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC conduit shall be ISI marked)
S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge
S&F in replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge.
Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for laying of cables including taking up or down LT cable complete all as specified.
M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-charge. Note : Thickness after punning shall be considered for payment.
Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge.
Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.
S&F steel body exhaust fan of 300mm sweep, 900 RPM, 240 volt, 5 Star complete with louvers and shutter and mouted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheasthed copper counductor flexible cable 24/0.2mm from ceiling rose to fan complete including braking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in CM (1:4) white washing maching with existing door complete all as specified and directed by Engineer - in - Charge.
M&L for Earthing complete with GI earth plate electrode 60cm x 60cm x 6m thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 Mtr below ground level, connection to GI Strip 32 X 6 mm as earthing lead, by means of bolts, nuts and washers of GI and protection by provision of GI medium grade pipe 50mm bore including provision of concrete pit in PCC(1:2:4) type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less 4 gs/sqmm) and frame of angle iron 25mm X 25mm X 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out out of 40mm X 8mm FI with fixing arrangement, funnel, wire mesh and earth work inhard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50mtrs all as per electric plate no. 3 of SSR part 1 and connecting to earch test point including taking out unserviceable earthing with all accessories all specified or indicated including tesing on completion all specified and directed by Engineer - in - Charge.
Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
PAREEK AND COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .