Loading
Loading…
Loading…
Tender Value
₹19.7 L
EMD Value
₹39,500
Closing Date
3 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Deposit Work
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
Tenderer must have to submit valid Electrical Contractor license as per Indian Electricity Rules for the respective category of works issued by Government Electrical License Board on or before the closing date of tender. Copy of the electrical contractor license should be submitted along with the tender offer, otherwise, the tender will be summarily rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
51 conditions · 5 needing a document upload
Whether the cost of earnest money deposited
Migration to GST regime - Special Tender Conditions: The rates should clearly indicate the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/ rate due to introduction of GST, shall be dealt with under Statutory Variation Clause. It should be ensure that bidders/tenderers are GST compliant and quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor should submit the GSTIN number and same should be mentioned in the bills along with a copy of GSTIN registration certificate while submitting the bills to accounts for audit and payment, As GST is scheduled to implemented wef 01.07.2017. Without GSTN, no bill will be accepted w.e.f. 01.07.2017
From 01.07.2017 GST has been implemented but the detail guideline is still not clear. Hence, new tax structure on materials and labour will be applicable to both Railway & contractor after getting proper notification
Payment of Earnest Money deposit (EMD) , in respect of e- tendering,should be accepted through net banking or online payment gateway only
A.Shifting of Electrical assets in connection with Construction of Community Hall by RLDA(Electric Portion). and B : Shifting of Electrical assets in connection with Construction of 158 nos. Quarters by RLDA(Electric Portion).
EL-LM-26-27-20~NFR
EL-LM-26-27-20
Open
Works - General
90 Days
Hojai, Assam
₹0
₹39,500
11 Aug 2026
11 Aug 2026
20 Aug 2026
30 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 14,32,932.08 | ||
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of HT heat-shrinkable type outdoor cable end termination kit suitable for 1-core, 11 kV grade, 120 sq.mm XLPE insulated armoured cable, complete with all necessary accessories such as stress control components, heat-shrinkable insulation tubes, sealing components, lugs, earth continuity arrangement, PG clamp and other required materials for terminating and connecting 11 kV cable to overhead line, complete in all respects as per relevant IS/IEC standards and as directed by the Engineer-in-Charge. | — | — | — | 31,987.2 | |
| — | 250.00 | — | — | ||
| Supply, laying, fitting and fixing of 200 mm dia Ductile Iron (DI) pipe for protection of electrical cables at track crossings/road crossings, including excavation, alignment, jointing, lowering, laying, backfilling and all necessary materials, fittings and accessories, complete in all respects as per site requirement and as directed by the Engineer-in-Charge. | — | — | — | 25,517.5 | |
| — | 250.00 | — | — | ||
| Provision, deployment and operation of HDT/HDD machine for horizontal boring outside the road/railway track embankment, with the boring setup positioned at a minimum distance of 6 m from the embankment ground level/edge and at a depth of approximately 2 m below the existing ground level, as directed by the Site Engineer. The work shall include complete preparation of the boring site, excavation and preparation of entry and exit pits, setting, alignment and operation of the HDT/HDD boring machine for making a 200 mm diameter horizontal bore for providing protective pipe/conduit for electrical cables. Suitable pipes for cable protection shall be supplied and placed through the bored passage by the contractor, including joining, alignment, installation and securing of the pipe. All required machinery, equipment, tools, tackles, operators, skilled/unskilled labour, fuel, water, consumables and other arrangements shall be provided by the contractor at his own cost. The work shall also include removal/disposal of spoil, dewatering wherever necessary and restoration of the site after completion, ensuring that the road/railway embankment and track stability are not disturbed. No open-cut excavation across the road/railway track shall be permitted. The complete work shall be carried out safely and in accordance with site requirements and instructions of the Engineer-in-Charge. | — | — | — | 8,88,482.5 | |
| — | 2.00 | — | — | ||
| Each Span | 6.00 | — | — | ||
| — | 25.00 | — | — | ||
| — | 1.00 | — | — | ||
| Construction of RCC electrical panel room of size 4 m x 4 m x 6 m (L x B x H), ground floor, including construction of RCC framed structure with suitable foundation, columns, beams, roof slab and required masonry works, complete with plastering, flooring, proper MS/steel door and suitable windows with grills, ventilators and other necessary openings. The work shall include all required civil, structural and finishing works, including reinforcement steel, shuttering, cement, sand, aggregate, brick/block work, concrete, plaster, flooring, painting and allied materials as required for a complete and functional panel room. Necessary provision shall be made for cable entry, cable trench/openings, earthing, ventilation and drainage, wherever required, as per site conditions. The contractor shall arrange and supply all materials, equipment, tools, tackles, scaffolding, formwork, consumables, petty items and other accessories required for proper execution and completion of the work, and all such costs shall be borne by the contractor. The work shall be executed with proper workmanship and in accordance with relevant IS codes, approved drawings/specifications and site requirements, including curing, finishing, removal of debris and making good the site, complete in all respects as directed by the Site Engineer/Engineer-in-Charge. | — | — | — | 3,29,607.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EL-LM-26-27-20.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].