Providing Galvalum Sheet shed and Special Repair Works to Chatram No 5 of Arulmigu Bannari Mariamman Temple Bannari sathyamangalam Erode district

Earth work excavation for foundation in all soils and sub Soils to full depth as may be directed except hard requiring blasting inclusive of shoring, strutting ans bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15 cms thick well rammed and consolidated shown by the departmental officers etc. Complete as per standard specification

Cement concrete 1:5:10 mix using 40mm HBG stone metal including cost and conveyance of all materials to site and labour charges including curing etc., complete.as per standard specification

Supplying and FILLING GRAVEL in 'foundation and basement in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling in foundation and basement with filling M.sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.

Supplying and fixing MS steel truss by using 80mm x40mm x 3.20mm rectangular tube, 40mm x 40mm x 3.20mm square tube for purlins and using 150mm x 150mm x 3.20mm size using vertical post . The cost and conveyance of all materials and labour charges but excluding of priming coat etc., complete complying with standard specification

Supplying and fixing colour coated galvalume sheet of size 0.47mm tk. The cost is including of all material and labour charges etc., complete

Brick work in Cement Mortar 1:5 using best quality II class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification.

Plastering with cemet mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three crushed stone sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.