Construction of a new unshaded two-wheeler parking area near the vehicle exit gate and replacement of proposed CBI Logo with approved Bilingual (Hindi and English) logo at inner reception of CBI HQ Building, New Delhi

S.No. DESCRIPTION UNIT QTY RATE TOTAL AMOUNT

2 4.1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

All work up to plinth level

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal

size derived from natural sources) cum 80.00 6812.00 544960.00

3 4.20 Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete

work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the

engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110%

of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the

cost of extra cement.

4.20.1. All works upto plinth level :

4.20.1.4 Concrete of M25 grade with minimum cement content of 300 kg /cum

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

Total Amount (A) 1468734.00

Total Amount (A) 1468734.00

BOQ for Replacement of proposed CBI Logo with approved bilingual (Hindi & English) logo at Inner Reception at CBI HQ New Delhi

S NO MR DESCRIPTION UNIT QTY RATE TOTAL AMOUNT

S NO MR DESCRIPTION UNIT QTY RATE TOTAL AMOUNT

Supply & installation of SS Golden Letter Logo, fabricated using high-quality brass sheets, with precision laser cutting,

proper joint finishing, and iron welding support structure, completed with double-layer fabrication for enhanced depth

1 MR and durability. The job includes polishing, finishing, fixing with required hardware, and complete installation at site. Size- Each 1 321257.1 321257.14

6x1 feet Approx (with scaffolding)

Total amount (B) 321257.14

Total amount (B) 321257.14

Grand total 1789991.14

Grand total 1789991.14

Digitally signed by AMIT