Electrical works for site preparation and Up gradation for establishment of automated plating shop

REMOVAL OF ITEMS: Removal, Dismantling, Shifting & Handing over of Cable terminations, PVC / MS conduit pipes with wiring, Cables, Switch Boards, Switch Socket Boards, Tube light fittings with down rods etc. as per the direction of in charge engineer. The removal and shifting shall be done for above materials with all accessories complete.

LT CABLING: Supply & laying of 3.5 core x 400 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex / KEI

CABLE END TERMINATION: Supply and making of end joint kits suitable for 1100 volt grade XLPE insulated 3.5 core x (120 to 400) SQMM aluminum conductor armoured cables including supplying and fixing of required crimping lugs, etc, as per site requirement. The scope also includes making of end termination after making end joint kit. NOTE:-Crimping shall be done with hydralic crimping tool. Make:Dowells / Jainson / Denson

LT MAIN POWER DISTRIBUTION PANEL: Design, Fabrication, Assembly, Internal wiring, provisioning in place of old panel, Testing of vertical type floor mounted powder coated L.T. Panel made of 14/16 SWG CRCA Sheet (IP-54) as per site condition and bring to HAL site after PDI at manufacture site. The panels shall be suitable for medium voltage L.T. distribution with required digital MFM & 3 nos indication lamps. Aluminium bus bars of size suitable for 2500 Amp rating duly marked Red, Yellow, Blue for phases & 1 No Black for neutral of rating 1600 Amps with heat shrinkable sleeves and mounted on cast resin supports / moulds. The panel shall be treated with all anti-corrosive process before powder coating & 2 nos earthing terminals as per IS 3043. The degree of ingress protection for the panel shall be equivalent to IP-54 conforming to IS-13947 (Pt-1). All panel doors and covers shall be provided with suitable compressible neoprene gaskets for high degree of ingress protection against dust, dirt, moisture, insects etc. Note: Drawings approvals and panel diamentions to be taken from site as directed by EIC. Multi function meter: Digital meter with measurement of (Voltage, Current & Frequency, Power Factor, Power & Energy with RS 485 ) Make: Secure. Incomer : Provision for 1 No of 1600A 4P, EDO ACB for Incommer and Out Goings : 3 No of 800A, 4P,EDO ACB, 2 Nos of 630A, 4P, 50kA MCCB, Bus bars of 2500A ,Earth: 50 mm x 10 mm. Aluminium Flat ACB/MCCB Make: Legrand / Schneider / Siemens as specified and as directed by EIC

LT MAIN POWER DISTRIBUTION PANEL: Design, Fabrication, Assembly, Internal wiring, provisioning in place of old panel, Testing of vertical type floor mounted powder coated L.T. Panel made of 14/16 SWG CRCA Sheet (IP-54) as per site condition and bring to HAL site after PDI at manufacture site. The panels shall be suitable for medium voltage L.T. distribution with required digital MFM & 3 nos indication lamps. Aluminium bus bars of size suitable for 1200 Amp rating duly marked Red, Yellow, Blue for phases & 1 No Black for neutral of rating 1000 Amps with heat shrinkable sleeves and mounted on cast resin supports / moulds. The panel shall be treated with all anti-corrosive process before powder coating & 2 nos earthing terminals as per IS 3043. The degree of ingress protection for the panel shall be equivalent to IP-54 conforming to IS-13947 (Pt-1). All panel doors and covers shall be provided with suitable compressible neoprene gaskets for high degree of ingress protection against dust, dirt, moisture, insects etc. Note: Drawings approvals and panel diamentions to be taken from site as directed by EIC. Multi function meter: Digital meter with measurement of (Voltage, Current & Frequency, Power Factor, Power & Energy with RS 485 ) Make: Secure. Bus bar chamber to be made with the provision for future expansion of panel Scope also includes required 1600A/1200A rated 3-phase busbar links to be provided for connecting existing outgoing bus ducts. Incomer : Provision for 1 No of 800A, 4P, EDO ACB for Incommer and Out Goings: 1 Nos of 630A, 4P, 50kA MCCB, 3 Nos of 400A, 4P, 50kA MCCB, 3 Nos of 250A, 4P, 36kA MCCB, Bus bars of 1200A, Earth bar: 36 mm x 6 mm. Aluminium Flat, ACB/MCCB Make: Legrand / Schneider / Siemens as specified and as directed by EIC

LT CABLING: Supply & laying of 3.5 core x 150 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex / KEI

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm ISI marked FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including earthing the point with 1.5sq mm FRLS PVC insulated flexible copper conductor single core cable and supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5 / 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

Supply, installation, testing & commissioning of Recessed Mounted 2 X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro / FA /Havells / Bajaj

Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall with necessary accessories. make : Philips/Wipro/CGL / FA /Havells / Bajaj

Supply and fixing LED light fitting (50-75) Watt flame/Chemical proof, CMRI certified and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size as per direction of EIC & Make : Philips / Wipro / CGL / FA / Havells / Bajaj

BLDC ceiling fans: Supply and provisioning of BLDC ceiling fans, 1200mm sweep, 5 star rated on existing roof with electronic Regulator, downrod of required length as per site condition and all fixing accessories as directed by EIC. Make: Crompton / Havells / Orient / Usha / Atomberg

POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only)

POWER WIRING: Providing and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 6.0 sq mm and 2 runs of 4 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

POWER WIRING: Providing and laying of 4 runs of 10 sq mm and 2 runs of 6 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.6 Amp switch each & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch and 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens for 230V Supply

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 6/16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No - 160 A 4POLE (Icu=36 Ka) MCCB Out going: 04 Nos - 63 A ( Type 'C') TP MCB 04 Nos - 32 A ( Type 'C') TP MCB

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No - 125 A 4POLE (Icu=36 Ka) MCCB Out going: 02 Nos - 63 A ( Type 'C') TP MCB 02 Nos - 32 A ( Type 'C') TP MCB 06 Nos - 32 A ( Type 'C') SP MCB 06 Nos - 16 A ( Type 'C') SP MCB

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC

EARTH STRIP:Supply & laying of 25 mm x 5 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

LT CABLING: Supply & laying of 3.5 core x 95 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex / KEI

LT CABLING: Supply & laying of 3.5 core x 70 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex / KEI

LT CABLING: Supply & laying of 3.5 core x 50 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by supplying all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex / KEI

SINGLE PHASE INDUSTRAIL SOCKET: Supply fixing, testing and proving of 20A rated industrial socket distribution boards Universal mounting type with 2P+E 3 PIN controlled by suitable rating equvalent 2 pole MCB as per site requirement by supplying all necessory fixing accessories. Make:Legrand / Havells / L&T.

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 63A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

THREE PHASE 63A INDUSTRAIL SOCKET: Supply fixing, testing and proving of 63A (3P+N+E 5P) rated industrial socket distribution boards Universal mounting type with 3P+N+E 5P controlled by suitable rating equivalent 4P MCB as per site requirement for "Equipments" power supply. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / Havells / L&T.

FIRE POINTS: Supply, installation, testing & commissioning of intelligent analog addressable photothermal detector (Make: Bosch) complete with mounting base complete as required, device to be fixed on existing roof/struss & integrating with Bosch existing Fire Alarm system with fixing accessories as per site condtion

FIRE POINTS: Supply & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required on surface of the wall/roof/struss with fixing accessories as per site condtion and connecting to detectors/response indicator/horn cum strobe/manual call point/ Main fire alarm panel etc as directed by EIC

FIRE POINTS: Supply, installation, testing & commissioning of response indicator compatible to Bosch photothermal detector on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required device to be fixed on false ceiling & integrating with Bosch existing Fire Alram system with fixing accessories as per site condition

FIRE POINTS:Supply, installation, testing & commissioning of addressable horn/sounder cum strobe (Make: Bosch) with mouting base complete as required device to be fixed on existing roof/struss & integrating with existing Bosch Fire Alram system with fixing accessories as per site condtion.

FIRE POINTS:Supply, installation, testing & commissioning of addressable manual call point (Make: Bosch) complete as required with box type and glass device to be fixed on existing wall/panels/partition frames & integrating with existing Bosch Fire Alram system with fixing accessories as per site condtion.

THREE PHASE 32A INDUSTRAIL SOCKET: Supply fixing, testing and proving of 32A (3P+N+E 5P) rated industrial socket distribution boards Universal mounting type with 3P+N+E 5P controlled by suitable rating equivalent 4P MCB as per site requirement for "Equipments" power supply. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / Havells / L&T.

Supply and replacement LED flood light/street light fittings of 60W with necessary accessories as per direction of EIC. The scope includes the climbing of heights more than 5 meter for fixing / replacement the same . Make : Philips/Wipro/CGL/FA/BAJAJ

PROVISION OF SINGLE ARM OCTOGANAL POLES: Supply & fixing of 6.0 mts height hot dip galvanised octoganal pole along with single arm standard bracket 1.5 m long along with control box protection with 10 amps 1 No MCB. The pole shall be grouted on cement concrete pedestal of 300mm x 300mm size & 1250 mm depth with suitable fixing accessories like plates, nuts and bolts with interconnection complete as per site condition & instruction of EIC. Make:K-lite/Valmount/Bajaj. The scope includes supply and laying of 3 core 2.5 sqmm cable from MCB to light fitting with interconnection complete.

Supply and fixing of 12 inch exhaust fan with louvers & with necessary accessories as per direction of EICs Make: CGL / Usha / Almonard

20 PAIR TELEPHONE CABLING: Supply and laying of 20 Pair telephone cable by suppling all required fixing accessories as per site requrement. Make: Finolex / Polycab / Havells.

10 PAIR TELEPHONE CABLING: Supply and laying of 10 Pair telephone cable by suppling all required fixing accessories as per site requrement. Make: Finolex / Polycab / Havells.

5 PAIR TELEPHONE CABLING: Supply and laying of 5 Pair telephone cable with suitable PVC conduits on the surface of the wall by suppling all required fixing accessories as per site requrement. Make: Finolex / Polycab / Havells.

RJ-11 TELEPHONE SOCKET(Jack Type): Supply and fixing of RJ- 11 telephone socket with 2 mm thick GI modular box independent surface mounted / concealed in the wall with inter connection complete. Make Legrand / Seimens / Crabtree

Supply and installation of pushbutton type phones and connecting it to the nearest outlet module of telephone socket including line wire and rochet box.

PROVIDING OF SPEAKERS: Supply, installation, testing & commissioning of (6-8) Watts speekers on existing wall with all interconnections as per site requirements and as directed by EIC. Make: Ahuja /Philips

TRENCH MAKING: Excavation of all kinds of earth up to a depth of 1000mm x 300mm. The dug earth should be refilled after executing the work. Scope includes road cutting if required.

Provision of Double walled corrugated(DWC)HDPE duct: Supply and laying of Double walled corrugated (DWC) HDPE duct made as per specifications IS 14930 part- II of suitable dia mm for 120 sq mm cable and communication cables in above trench with proper DWC Coupler interconnection to enable to replace the laid cable in future if necessary as per ste condition and instruction of EIC. Make:Duraline(Dura guard) / CPE / Telerex. Colour: Orange

Supplying, fabricating by welding and erecting M.S rolled structural members like ,channels , angles M.S pipes, MS square pipes, M S plate etc in position of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing. Also Painting with FRP Paint

LAN CABLING:Supply and laying of CAT-6E cable with 20mm dia. and 2mm thick pvc condutes on the surface of the wall/ race ways by suppling all required fixing accessories as per site requrement.Make: D-Link / AMP.

RJ-45 UTP INFORMATION OUT LET:: Supply and fixing of information Outlet (Jack Type) with shutter with 2 mm thick GI modular box independent surface mounted / concealed in the wall with inter connection complete. Make Legrand / Seimens / Crabtree

Supply and Fixing of 15U Rack on existing walls by supplying all required accessories like 2 nos. PDUs and 2 nos cable managers as per site condition. The scope also includes dressing of all cables.

Supply, laying and testing of 12 Core Single Mode OFC on existing walls / trenches/ trays by supplying all required fixing accessories with suitable size HDPE pipe for protection of OFC as per site condition. MAKE: AMP/ Molex

Supply and fixing of Rack Mount LIU with 4 adapter plates loaded with Single mode LC/LC pigtails ( i.e, 2 X 12 pig tails := 24core LIU with SM LC pigtals(Fully loaded) in the existing rack by providing of fixing of all accessories as per site condition. MAKE: Amp.

Splicing, testing and proving of Pigtails in existing rack by providing of fixing of all accessories as per site condition..

Supply, Fixing, Installation, testing and commissioning of 24 port 10/100/1000 mbps switch + 4X SFP Ports (Enterprise Model) in the existing rack with all accessories as per site condition. The Scope includes the configaration of the switch as per requrement. MAKE: Extreem X-440-G2/EX5320-24T.

TRENCH MAKING: Excavation of all kinds of earth up to required depth for identification of faults in the UG laid OFC, identification of the faults and making joint and cylinder and providing protection, by covering top of the cable with protection after relaying repaired OFC cable and refilling the same as per site requirement.

Supply , fixing and termination of 24 port jack panel (Fully loaded) in the existing RACK of fixing of all accessories as per site condition Scope also includes supply of 2 Nos. of boxes each contains 100 nos. RJ-45 Jacks Make: AMP.

Supply and Installation of Extreme SFP Gigabit LX Modules (SFP SM Modules) in existing rack as per site condition.

Supply and installation of HI-Flow 400 mm sweep pedastal / Wall mounted BLDC fans with ivory /White color.Make: CGL/Wipro/USHA

HEAVY DUTY FANS: Supply and installation of Heavy Duty Flow 600 mm sweep wall / pedastal mounted fans on surface / wall / struss with fixing accessories as per site condtion. .Make: CGL / Wipro / USHA / Almonard

Supply and fixing of Heavy duty 450 mm exhaust fan with louvers & with necessary accessories as per direction of EICs Make: CGL / Usha / Almonard

MCCB ENCLOUSER: Supply installation, testing and proving of 4 pole 160A rated, 36kA industrial MCCB with suitable metal enclosure. The MCCB box shall be mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

Supply of 2 TR Hi-wall mount, Inverter type split air conditioiners with 5 star star rating as per following specifications Type: Inverter Model, high wall mount type split Air conditioner Rated Cooling capacity (i.e. at 100% load ) : 6100 Watt or better Star rating as per BEE: 5 Star ISEER : 5.0 or better Refrigerant: Eco friendly refrigerant. Compressor: Scroll/ Reciprocating/ Rotary type compressor. Evaporator & condenser Coil Material : Copper only with corrosion resistant coating. Shall be provided with cordless Remote. Unit shall have display of temparature. Power supply: Single phase, 230±10%, 50Hz ± 3% Make: Bluestar/ Daikin/ Carrier/ Lloyd/ LG/ O-Genaral/ Mitsuishi

Installation & commissioning of 2.0 TR wall mount split AC at proposed Locations including Gas charging ,testing. Scope include : 1. Positioning of indoor unit and ODUs on brackets. 2. Making a hole in the wall for copper lines and drain lines 3. Fixing a suitable PVC pipe in the hole to route copper line and drain line through it. 4. Laying copper pipeline, drain lines through the PVC pipe fixed in the wall. 5. Brazing copper lines, flaring, wiring and conducting leak check, vacuumising and refrigerent charging and checking the performance of unit. 6. Proper closing of holes in the wall.

Supply & laying of suction and liquid copper pipes of size as recommended by OEM with proper insulation suitable to 2TR split AC.

Supply and Laying of Suitable cable as recommended by OEM to connect power supply point to ODU for 2TR split AC (Make:Polycab/ Havells /Finolex/ Gloster only)

Supply and laying of CPVC drain pipe of size as recommended by OEM with suitable bends, couplings as per site condition. Pipe line make: Sudhakar/ Finolex/ Astral/ Ashirwad

Supply and fixing of suitable Ms stands/ brackets for Outdoor units of 2TR Split ACs as per site requirement.

No Rupees Only

HAL/HD/MT/CT/26-27/3

HAL/HD/MT/CT/26-27/3

Electrical works for site preparation and Up gradation for establishment of automated plating shop

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II