SPECIAL REPAIRS TO BLDG NO P 324 P 326 P 328 AND P 329 SINGLE JCOS LIVING ACCN AND P306 RANE AUDITORIUM UNDER GE CENTRAL KHADKI

Amount

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and as directed by Engineer - in -Charge.

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site n.exc. 1.5 Sqm each complete all as specified and as directed by Engineer - in -Charge.

Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified and as directed by Engineer - in -Charge.

Taking down steel window / ventilator of any description n exc 1.8 sqm eachcomplete all as specified and as directed by Engineer - in -Charge.

S&F for powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and directed by Engr-in-charge Note : 4mm thick Glazing and 0.63 mm dia SS wire mesh with average width of aperture 1.4 mm shall be deemed to be included in unit rate quoted.

S&F for powder coated (Powder coating shall not be less than 50 micron of approved colour) anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and directed by Engr-in-charge Note: 4mm Glazing and 0.63 mm dia SS wire mesh with average width of aperture 1.4 mm shall be deemed to be included in unit rate quoted.

S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L for PCC M-15 grade (nominal mix) using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S&F factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood complete all as specified and directed by Engr-in-charge

Supply and fixing powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium door made out of hollow extruded aluminium section as mentioned below: i) Each door having 02 Nos disc or D type handles, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete all as specified and directed by Engr-in-charge ii) Chowkhat Frame : 101.60x44.45x1.55 mm iii) Shutter vertical/stile: 85.00x44.45x1.56 mm iv) Shutter middle rail : 83.50x44.45x1.54 mm v) Shutter top and bottom rail : 110x44.45x1.54 mm

S & F Flush shutter solid core 30 mm thick with brick board core & ply wood face panels commercial type on both sides complete all as specified and directed by Engr-in-charge

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.24 (a) and fitted to chowkhats complete all as specified and directed by Engr-in-charge

S&F in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed by Engr-in-charge

S&F Butt Hinges medium weight cold rolled stainless steel 100 mm long complete.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F Aluminium anodised, barrel tower bolts of 100mm length,of extruded section and fixed

S&F for Extruded aluminium alloy handles 150 mm, fabricated type, anodised

S&F for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long

S&F for mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete

M&L for double charged vitrified tiles 8-10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile & laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge

ditto as per item no.22 above but as in skirting over, including 10mm thick plasteras in backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile & laid over & including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

M&L for Glazed ceramic coloured tiles on vertical surface of size 450 X300 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile & laid over & including including 10 mm thick cement plaster 1:4 as in backing coat complete all as specified and directed by Engr-in-charge

M&L Dark shed Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile and laid over & including 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge

M&L Light shed Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile & laid over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge

M&L for vitrified ceramic coloured tiles in skirting surface of 8-10 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile & laid over and including 10mm thick rendering as in backing coat in CM 1:4 and complete all as specified and as directed by Engr-in-charge

M & L for preparing plastered or unplastered old surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-charge

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed by Engr-in-charge

M & L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and as directed by Engr-in-charge

M & L for applying wall care putty not less than 1mm thick as in interior on wall / ceiling surfaces of any description finishing surfce even and smooth complete all as specified and as directed by Engr-in-charge

M & L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge

M & L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge

M & L for complete removal of existing treatment including scrapping levelling & preparing the surface of wall and applying two coat of Lustre paint of (any tint) including one coat wall care putty not less than 1mm thick over a coat of primer on wall surfaces complete all as specified and as directed by Engr-in-charge

Removing of old water proofing treatment and cleaning the surface of slab with wire brush, removing dust,foreign materials and removing the rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L water proofing treatment over RCC slab by applying oil based bitumen primer @ 0.40 kg/Sqm and providing and laying 3 mm thick APP modified water proofing polymetric memberane with an overlap of 100mm & 150mm shall be provided on sides and ends respectively having weight not less than 3.6kg/sqm, reinforced with non woven polyster reinforced matt weighing not less than 160gms/sqm polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650N/5cm, by torching method and applying a coat of solar reflective aluminium paint @0.15 Kg/Sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatmentall as specified and directed. NOTE: i) Work shall be executed by authorized applicator of the manufacturer. ii) Disconnecting existing tanks upto 2000 litre capacity,including removal of ,setting aside (or lowering if required) for repairs and hoisting if required,reconnecting and refixing in position as in same position complete

M&L for 10mm thick rendering in CM 1:3 on RCC roof slab mixed with liquid water proofing compound as per manufacturers instruction finishing even and smooth to receive water proofing treatment complete without using extra cement complete all as specified and directed by Engineer-in-Charge. Note :- Liquid WPC shall be measured and paid separatelyunder revaent item of this BOQ.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. (Make: PIDILITE or equivalent make given under list of make) complete all as specified and directed incuding fixing packer for hydrophobic PU foam and Sealer as per manufacturers specification complete all as specified and as directed by Engr-in-charge.

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent make as approved by GE cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent make given under list of makes, curing, cleaning the surface etc, complete all as specified and as directed by Engr-in-charge and as per the sample done at ground floor.

M&L for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe complete including making good to floor fixed in repairs complete all as specified and directed by Engr-in-charge

M&L for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairs, complete all as specified and directed by Engr-in-charge

M & L Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.

S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engr-in-charge.

S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and as directed by Engr-in-charge.

S&F in repair Bib taps 15mm dia, cast copper alloy chromium plated, with CP flange complete all as specified and as directed by Engr-in-charge.

S&F in repair Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makes specified in PS fixed in repairs complete all as specified and as directed by Engr-in-charge.

S&F in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and as directed by Engr-in-charge.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS fixed complete all as specified and as directed by Engr-in-charge.

S&F Fancy type (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nut of length 450 mm fixed in all as directed.

S&F in repairs PVC connections 15 mm size with PTMT nut of length 600 mm fixed all as directed.

S&F in repairs PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 600 mm long fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store all as directed.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing or removal to store all as directed.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011complete all as specified and as directed by Engr-in-Charge.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed by Engr-in-Charge. .

Taking up or down steel tubing 40mm dia and connections including cleaning for refixing or removal to store all as directed.

Supplying & fixing to walls and ceiling 40 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed by Engr-in-Charge.

Refixing old steel tubing and connection of 40 mm dia in new or old position walls, ceiling, floor etc with new fittings complete.

Supplying & fixing Brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union fixed in repairs complete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block/brick masonry walls complete all as specified and as directed by Engr-in-Charge. .

M&L for 20-25mm thick machine cut machine polished Kota stone slab flooring and jointed in neat cement slurry mixed with pigment to match the shade including cutting and polishing and laid over & including 15 mm thick screed bed in CM 1:3 complete all as specified and as directed by Engr-in-Charge.

All as per item No 64 but on step riser skirtinglaid over and including 10mm thick renderingas in backing coat in CM 1:3 complete all as specified and directed by Engr-in-Charge.

Demolition/ Dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness & size complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick PCC M-7.5 grade (Nominal Mix) using 40 mm graded stone aggregate as in sub base below interlocking paver blocks complete all as specified and as directed by Engr-in-Charge.

M&L for 50 mm thick crushed stone dust filling under floors as cushioning for laying of interlocking paver block complete all as specified and as directed by Engr-in-Charge. .

M&L for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment,rubber moulded tiles M-35 Grade,as in floors,paving,path etc.complete all as specified and as directed by Engr-in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the same out side the primeses complete all as specified and as directed by Engr-in-Charge (below or above GL).

M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan, exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed

M & L 15 mm thick (10mm+5mm) plaster on fair faces of brickwork / concrete or PCC block masonry in CM 1:4 and surface finished even and fair by mixing liquid waterproofing compound as per manufacturers instructions complete. Note: Liquid WPC shall be measured & paid seperately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures over a coat of alkali resistant primer on walls complete all as specified and as directed by Engr-in-Charge

M&L for complete removal of existing treatment of old surfaces and applying two coats of weather proof acrylic exterior paint (100%) Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed by Engr-in-Charge NOTE:- (i) Before applying weather proof acrylic emulsion paint, contractor shall use the wire brush for the removal of loose paint, dust, algae, moss etc. (ii) Filling of cracks, holes and dents are includes in the quoted rates. (iii) Paint shall be procured through authorised applicator only and certificate of authorised applicator shall be submitted by contractor before commencement of work.

M&L for 75mm thick PCC M-10 grade (nominal mix) using 40 mm graded stone aggregrate as in plinth protection, Path, floor construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumin/Compound grade 'A' complete all as specified and as directed by Engr-in-Charge

Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B

Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge

S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed by Engr-in-Charge

M & L preparation of new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engr-in-Charge

S&F Bib cock with wall , cast copper alloy chromium plated, with all fittings complete all as specified and as directed by Engr-in-Charge. Make Jaquar KUP-M35037PM or equivalent make given under list of make.

S&F Bib cock with wall flange, cast copper alloy chromium plated, long body, with CP flangecomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Cat no CON-107KN or equivalent make given under list of make.

S & F Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings complete all as specified and as directed by Engr-in-Charge. Make Jaquar Cat no CON-053KN or equivalent make given under list of make.

S & F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, complete including making good to floor fixed in repairs complete all as specified and as directed by Engr-in-Charge. Make Prayag Cat no 4054 or equivalent make given under list of make.

S & F Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

S & F Vitreous China wash down water closet (Pedestal pan), white (including fixing bolts, flush pipe) fixed as in repairs, complete all as specified and as directed by Engr-in-Charge. Make Hindware Cat no 20012 (S-25.5/P-18)or equivalent make given under list of make.

S & F PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever fixed in repairs complete all as specified and as directed by Engr-in-Charge. Make Hindware Sleek essence single flush or equivalent make given under list of make.

S & F Swan Neck Tap with left hand operating Knob, cast copper alloy fancy type, chromium plated, screwed down high pressure, with all other fittings complete all as specified and as directed by Engr-in-Charge. Make Hindware Cat no F280012 or equivalent make given under list of make.

S & F Health faucet, Hand Shower, with 1mtr Long easy flex tube in chrome finish & wall hook complete all as specified and as directed by Engr-in-Charge. Make Jaguar cat no ALD-565 or equivalent make given under list of make.

S & F Tower shelf assembly consisting of chromium plated bracket guard and with CP aluminium railing complete all as specified and as directed by Engr-in-Charge. Make Hindware Cat no F870009 or equivalent make given under list of make.

S&F Towel ring, brass body, glossy finish omplete all as specified and as directed by Engr-in-Charge. Make Hindware Cat no F880007 or equivalent make given under list of make.

S&F fancy type MS curtain rod with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and directed

S&F for vitreous china Flat Back Large urinal size 37.5x39x59cm, starwhite pastel special, including and providing and fixing plugs,bedding urinalagainst wall in cement mortar (1:2),securing urinals to plugs with and including 60mm long brass screws,pointing around urinal back in cement;fixing automatic flushing cistern with brackets,flushing pipe, grating and union for discharge pipe complete all as specified and as directed by Engr-in-charge. Make Hindware cat no 60002 or equivalent make given under list of make.

S&F Full Pedestral Wash basin , size 55 x 40 x 87.4 cm, of Hindware, angle back including brackets brackets CP wastes and all other fittings complete all as specified and directed by Engr-in-charge. Make Hindware Cat. No 10125 Ped 11047 or equivalent make given under list of make.

Material and labour for rendering 10mm thick on brick or concrete surfaces on walls in CM 1:3 mixed with and including liquid WPC as per manufactureres instruction in Sunken portion complete all as specified and as directed by Engr-in-Charge.. Note :-Liquid WPC shall be measured and paid separately under relvant item of this BOQ.

Material and labour PCC M-5 grade (Nominal Mix) using 40 mm graded stone aggregate for sunkun portion of slab complete all as specified and as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring any size ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc

Taking down carefully submain wiring any size complete all as specified and as directed by Engr-in-charge.

Taking down DB including MCCB/MCB any type any size complete all as specified and as directed by Engr-in-charge.

M&L Point wiring concealed complete with 1.5 sqmm single core PVC insulated sheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed in wall or ceiling etc including 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including suitable size of GI/MS Sunken Boxes alongwith top cover plate and frame for etc.

One light/Fan/Exhaust Fan/Bell point controlled by one, one way switch.

One light point controlled by two way switch.

One 3 pin socket outlet 6A on independent board.

One 3 pin socket outlet 6A on same board with other switches

All as per item No 105 above but with copper stranded cable of size 2.5 sqmm for 3/6 pin socket outlet 16 amp on one independent board

M & L for concealed submain wiring with two single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC conduit with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two runs of 2.5sqmm Copper conductor cable with one run of 2.5sqmm Copper conductor cable earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for concealed submain wiring with two single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4sqmm (Nominal area) drawn through in and including PVC conduit with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two runs of 4sqmm Copper conductor cable with one run of 4sqmm Copper conductor cable earth wire and one run of PVC conduit shall be measured as one unit length.

M & L for concealed submain wiring with two single core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6 sqmm (Nominal area) drawn through in and including PVC conduit with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two runs of 6sqmm Copper conductor cable with one run of 6sqmm Copper conductor cable earth wire and one run of PVC conduit shall be measured as one unit length.

S & F modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete

S & F modular socket, 5/6 Amps, 2/3 pin 2 module (ISI marked) complete

S & F modular switch 1 way, 16 Amps, 1 module (ISI marked) complete

S & F modular socket, 6/16 Amps, 2/3 pin 2 module (ISI marked) complete

S & F modular Bell Push 6A 1 Module (ISI marked) complete

S & F modular switch 2 way 6 Amps 1 Module (ISI marked) complete

S & F modular fan step regulator 120W 2 Module AC 240 Volts, 50 Hz all as specified and as directed.

S & F in replacment angular Lamp holder of PVC/ Polycarbonate type with back plate all as specified and as directed by Engr-in-Charge.

S & F in replacment ceiling rose surface Bakelite three terminal all as specified and as directed by Engr-in-Charge.

S & F in replacment Sheet metal enclosure MCB DB SPN 08 way Double door, 240 Volts AC all as specified and as directed by Engr-in-Charge.

S & F in replacment Sheet metal enclosure MCB DB SPN 12 way Double door, 240 Volts AC all as specified and as directed by Engr-in-Charge.

S & F in replacment Vertical MCB distribution board, as MCB TPN incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

S & F in replacment MCB TPN 40 to 63 Amps, 415 volt 10 KA complete all as specified and directed by Engr-in-Charge.

S & F in replacment MCB, SPN 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed by Engr-in-Charge.

S & F in replacment MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed by Engr-in-Charge.

S & F in replacement LED Light batten 20 watt, 4 feet AC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge.

S & F in replacement LED Light batten 10 watt, 2 feet AC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge.

S & F LED lamp 12 watt, CDL, B-22 (Pin type), 230V, PF-0.95 (min) all as specified and directed by Engr-in-Charge.

S & F in replacement LED surface mounted downlighter of 12 watt 230 Volts complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable all as specified and directed. Make : Philips Cat No. SM250/260 LED 12S 6500 PSU WH or equivalent make given under lis of makes.

S & F in replacement LED building security light 25 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 25/32 mm dia bracket of total length 60 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and directed. Make : Philips Cat No. BRP029 LED 25 CW SLR GR PSU SPD or equivalent make given under lis of makes.

S & F in replacement exhaust fan made of sturdy engineering plastic complete with louvers and shutter voltage 230 volts 50 Hz RPM 1200 copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge. Note - Old unsericeable exhaust ceiling fan shall be deposited in MES store

S & F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge. Note - Old unsericeable ceiling fan shall be deposited in MES store

S & F in replacement electric water heater, storage type steel body with glass inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as anchor fastner for hanging of geyser, safety valve, thermostate, NRV, copper connection pipe, plug top 16 Amps etc complete all as specified and directed. Make : Usha Model : Warmboy or equivalent make given under list of makes. Note : Old unsericeable geyers shall be deposited in MES Store.

V.R.PRAJAPATI AND CO. (BID ID -3155833)

M/S. Suryawanshi And Brothers (BID ID -3156151)

Veekay Enterprises (BID ID -3155979)

S.R.M.K Enterprises (BID ID -3156003)

L.K.R.TIWARI CONSTRUCTION (BID ID -3156131)

agarwal and company (BID ID -3156010)

UNICON (BID ID -3155707)

M/s L. K. Agarwal (BID ID -3155244)

M/s.BAJRANG CONSTRUCTION (BID ID -3153933)