Structural repair and visitors amenities to Megheswar Temple, Bhubaneswar for 2024-25

Providing and fixing double scaffolding system (cup lock type) on the exterior and interior side of Jagamohan and Garbhagriha, up to 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal &vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work for the required duration as approved and removing it thereafter at Megheswar Temple, Bhubaneswar.

Raking out stone joints in lime or cement mortar and preparing the surface for re-pointing, including disposal of rubbish to the dumping ground, all complete as per direction of Site-in-Charge at Jagamohan and Garbhagriha of Megheswar Temple, Bhubaneswar.

Drilling holes of 12mm dia up to 300mm depth and fixing nozzle for PMC Grout in the inner chambers for fill the gaps, voids, cavities, in the inner face for consolidation at Garbhagriha and Jagamohan of Megheswar Temple, Bhubaneswar.

PMC Grouting of roof area with acrylic polymer emulsion added with OPC one part having polymer loading 10% with appropriate dose non shrink powder 0.05 part (Cebex) and plastic sizer 0.05 part having pressure 0.2 to 0.5 Kg/Sqm at Jagamohan and Garbhagriha of Megheswar Temple, Bhubaneswar. Analysis for PMC Grout Rate for One Lot i.e. 25.340kg.

Provision of recess pointing remains ancient structures temples and floor with mortar 1 : 1 : 1 (1 Lime : 1 Brick Surkhi : 1 Course Sand) with mixing natural adhesive and use 10% of Polymer including cleaning of joints and water curing at Jagamohan, Garbhagriha and floor of Megheswar Temple, Bhubaneswar.

Removing worn out architectural stone members (0.01 Sqm to 0.10 Sqm) at different height and place with very carefully to maintain the original structure and stacking the same for reassembling the fallen members as per original at Garbhagriha and Jagamohan of Megheswar Temple, Bhubaneswar.

Resetting and prefixing the original Architect members (0.01 Sqm to 0.10 Sqm) with epoxy mortar (1 : 2 : 5) 1 Hardener : 2 Resign : 5 matching stone dust and clamping together with stainless steel rod 8mm to 10mm dia for proper anchoring for safety of view at Garbhagriha and Jagamohan of Megheswar Temple, Bhubaneswar.