REPAIR REPLACEMENT TO ROOF TREATMENT, PLASTERING, PERIODICAL SERVICES, JOINERY WORK, PLUMBING, SANITARY WORKS AND OTHER CONNECTED ITEMS OF MD ACCN IN MH LINES, STATION DENTAL OFFRS MESS, NEW OPD COMPLEX, PCC WARD AND CERTAIN BLDGS UNDER GE (EAST) D

Amount

S&F in repair 12 mm thick toughend glass partition / Fixed glass/ door (shutter) with hydraulic floor spring and top pivot and with set of new SS hydraulic floor spring & top pivot sufficent to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required incl figured/ frosted glass film of required pattern/ logo/ shape on one side and incl fixing on Aluminium / WPC Frame (As per site requirement) incl all required accessories rubber beading, silicon, SS Handle 600mm Long of required design and shape etc Colour as approved by Engr-in-Charge Complete all as specified and directed. Make of Hydraulic floor spring and top pivot set : Ozone, Ebco, Hardwyn

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises, complete all as specified and as directed.

M & L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion

M & L for Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement screed 1:6, complete in all respect as specified.

Description all as per item No. 4 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4, complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (300mm x600mm x 7-8 mm) thick fixed with chemical adhesive Fevi Mate of euivalent and joint shall be kept as 3mm filled with epoxy. to attain the best result 3mm thick tile spacers to be used,Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly, complete all as specified and directed.

M & L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm or 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including rendering 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion

M&L for cement concrete 25 mm thick in PCC 1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even, complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 sqm and not exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhat or frame not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm incl shutter after replacing chowkhats the old shutter shall be refixed in same opening complete all as specified and directed.

Taking down Shutters of any exc 1 Sqm but not exc 2.0 Sqm, complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, incl Filling hollow of frame with plain cement concrete 1:2:4, complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl Filling hollow of frame with plain cement concrete 1:2:4 complete, as specified and directed.

S & F IInd Class HW 35 mm thick Plain framed, panelled shutter (any No panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed.

S&F IInd Class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc, sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats, complete all as specified and directed.

S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats, complete all as specified and directed

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed, complete all as specified and directed.

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges,PVC magnet & necessary fitting and locking arrangement . (vi) Entire window shall be power coated with pure polyster coat of any shde as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium window as per TD Drg No CEDZ/TD-316 with following specification : (i) Outer frame of size 40mmx114mm with 1.mm thickness, corner 45 degree cut & aluminium welded (ii) Centre mullion of size 40mm x65mm (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3 mm thickness 45 degree cut mechanically joint with 6mm allen key boult clamp with 5mm clear glass both side EPDM rubbe gasket metal body hand layer type single point lock, aluminium kobra hinges 2 No per shutter. (iv) 12mm ss 202 grade round bar . (v) Welded wiremesh sutter (2 Nos)of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be power coated with pure polyster coat of any shade as approved by GE. (vii) window shall have provision of for installtaion of window AC/ Desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-Charge. (vii) Window shall be installed with silicone complete all as specified and directed by Engineer in-Charge.

S&F aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 5 mm thick frosted glass etc, provision for fixing the exhaust fan complete all as specified and directed.

S & F Aluminium powder coated of any colour (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) Frame work for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides witrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as drawing and engr in charge.

S & F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed.

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins, complete all as specified & directed.

S & F 4 mm thick ordinary glass and glazing with oil putty in square not exc 0.5 Sqm in each pane or rubber beading /putty as required, complete all as specified & directed.

S & F 4 mm thick Frosted glass and glazing with oil putty in square not exc 0.5 Sqm in each pane or rubber beading/putty as required, complete all as specified & directed.

S & F in repair Stainless steel glass door handle 600mm long with screw, complete all as specified and directed.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site to store, complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece, complete all as specified and directed. Make : Prayag/ Sintex/Vectus

S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed, complete all as specified and directed.

S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed, complete all as specified and directed.

S & F in repair ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed, complete all as specified and directed.

M&L for welding in repair of metal thickness not exc 6 mm and length of weld exc 2.5 cm, not exc 5 cm, complete all as specified and directed.

M&L for Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi?chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc

M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement, complete all as specifed & as directed. (Incl new brick work)

M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specifed & as directed.

M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement on ceilings, complete all as specifed & as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 white marble stone chipping 10mm nominal size with colour compound) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove, complete all as specified and directed.

S & F 32 mm dia Unplasticised PVC pipes of pressure rating (10 kgf/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed. Make:- Finolex / Supreme / Vectus

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty, complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick Birla putty complete all as specified and directed.

M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc, complete all as specified and directed.

M&L Granite (of any type) tiles 16 to 18mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 15 mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing, complete complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Demolition cement concrete (reinforced) of any description and in any position, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 making good of dismantled portion by plastered/ concrete work and match with existing surface, complete all as specified and directed.

M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seism and other similar bands, plinth courses, string course, lacings courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly round or chamfered angles and thorating, complete all as specified and directed.

S&F for steel windows fabricated from roll formed setions made of galvanized steel colour coated powder coated (Base steel as per IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60 mm. The coated section shall be with primer coated of primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50 - 60 microns thick with the following specifications :- (a) Main frame 72mm x 55mm x 0.58mm. (b) Mullion 72mm x 50 mm x 0.58mm. (c) Glaxed/guazed shutter frame 47 mm 20.20mm x 0.58mm. (d) Glass beads size 12 mm x 12 mm x 0.58mm Accessories. Each shutter shall be provided with the following fittings :- (i) Stainless steel pipe of hinges 01 set. (ii) Aluminium powder coated handle - 04 Nos. (iii) Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass. (iv) Wire Mesh - Stainless steel wire mesh of 0.3mm noninal dia of wire and average width of aperture 1.40mm. (v) Grills window shall be provided with grill made of 10mm square MS bars welded to 12mm x 6mm thick MS plate. Distance between bars should not be more then 12cm c/c . Total grill uit shall be enamel painted and fixed to window frame with screw. Note : The glazed /Guaged shutter including guard bars shall be measure once i.e. as per area of opening . No separate payment of separate shutter i.e.glazed and fly proof and guard by the contractor is deemed to inclusive of all aspects as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.

M&L for sunken treatment as following over it complete all as specified and as directed:- (a) Rendering 10 mm thiick in CM 1:4, (b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth (c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane

S&F 200 mm long brass barrel tower bolts, wth brass screws, complete all as specified and directed.

S&F 150 mm long Extruded Brass handles, fabricated type polished with brass screws, complete all as specified and directed.

S&F Brass butt hinges in 125 mm long type C11 with brass screws, complete all as specified and directed.

Supply and fixed Floor door stopper 140mm long of brass body and tongue with hard drawn steel spring, complete all as specified and directed..

S&F 250 mm long brass sliding door bolt and fixed with brass screws, complete all as specified and directed.

S & F in repair Aluminium extruded section body door closer, hydraulically regulated, design No 2, universal type, suitable for door shutter 701 mm to 850 mm in width and of weight 36 to 60 Kg each, complete all as specified and as directed.

S & F in repair Double action floor spring, hydraulically regulated, made out of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete for glass/aluminium door, complete all as specified and as directed.

S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed

S&F in repairs 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as directed

S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

Supply and fixed in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25 mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00m to 2.50m long), complete all as directed and specified.

S & F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover, complete all as specified. MAKE : Parryware / Hindware /Jaquar

S & F in repair Vitreous China wash down water closet pan (S-Trap/ P-Trap) 1st quality Semi pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover, complete all as specified. MAKE : Parryware / Hindware /Jaquar

S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litre capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern, complete all as specified. MAKE : Parryware / Hindware / Jaquar

S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with intergral foot rests, cast iron 'S' trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

S&F in repairs Square shape Hindware fonte ceramic table top wash hand basin Star white Italian collection (Model No. 91043 of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings, complete in all respect as specified and directed. MAKE : Hindware (Model No. 91043) or equivqlent in Kohler / Jaquar

Supply and fixing in repairs floor mounted coupled star white one piece water closet (Pedestal pattern) (Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set, incl flushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti syphonage pipe etc., complete in all respect as specified and directed. Make : Hindware cat part No 92551 (S-22) 70 x 38 x 73 Cm or equivalent in Kohler / Jaquar

S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe, complete in all respect as specified. MAKE : Kohler / Hindware / Jaquar

Supply and fixed in repair Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, (Item code : F-570012) round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes, complete in all respect as specified and directed by Engr-in-Charge. (Make:-Hindware CAT Part No:F-570012 or equivalent in Kohler / Jaquar

Supply and fixed CP finish Robe Hook, complete in all respect as specified and directed by Engr-in-Charge. Make:-Hindware CAT Part No:F890001 or equivalent in Jaquar / Kohler

S&F in repairs chromium plated health faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified . (Make:-Hindware CAT Part No : F-160122 or equivalent in Kohler / Jaquar

Supply and fixed in repairs chromium plated finish paper holder complete in all respect, complete as specified and directed by Engr-in-Charge. Make : Hindware cat. No. F840008 or equivalent in Kohler / Jaquar

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror, complete all as specified and directed. MAKE : CERA / Hindware / PRAYAG

Supply and fixed peg set of 6 fixed with rawal plug make ;- Prayag Cat no BEA-30 or equivalent in Shakti / Hindware / PRAYAG).

S & F in repairs Hindware Cat No. F-840004 Soap Holder (Brass) with tumber holder MAKE : Hindware Cat No. F-840004 or equivalent in Kohler / Jaquar

S&F in repair One piece white Wash Basin with full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602

S & F in repair plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

S&F in repair white, vitreous china, battery based, infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & as directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or Equivalent model of GROHE/KEROVIT (Kajaria)

S&F brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe for WHB, complete all as specified and directed.

S&F in repairs 40 mm bore PVC waste pipe for urinals/sink, complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin,complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals, complete all as specified and directed.

Supply and fixed in repairs 600 mm long C P finish CP Towel Bar complete in all respect as specified and directed by Engr-in-Charge. Make:- Hindware Cat. No. F840013 or equivalent in Kohler / Jaquar

S&F in repairs chromium plated cast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as directed. Make: Hindware Cat No. F-320006 or equivalent in Kohler /Jaquar

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make: Hindware Cat No. F-320005 or equivalent in Kohler /Jaquar

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete in all respect as specified.

S & F in repair 15mm bore Pillar cock Swan neck spoout and aertor for WHB, complete all as specified & directed. Make : Cera Cat No.: F1099104 or equivalent.

S & F in repair of SS chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed.

Dismantling water tanks exc 250 & not exc 500 ltr capacity and removing to store, complete all as specified and directed.

S&F 500 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB/Sink, complete all as specified and directed.

S & F in repair of Brass chromium plated towel ring, fixed with rawl plugs, complete all as specified and directed.

S & F in repair 600mm Long PVC connection suitable for 15mm bore pipes, complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 Ltr & not exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc incl reconnecting and refixing in position, complete in all respect as specified.

Disconnecting existing tanks of capacity exc 500 Ltr & n exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc incl reconnecting and refixing in position, complete in all respect as specified.

S&F in repair Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed,.Make : Prayag Cat No : BEA-55 or equivalent.

S&F in repair corner Glass Shelf 300mm (with brass brackets) complete all as specified and directed. Make : Prayag Cat No : BEA-44 or equivalent.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Steel work in tubular trusses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, polycarbonate sheet or any type of sheet, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curved steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness thickness (below or above ground level) and disposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed. .

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed.

M&L for 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hydraulic hinges (Make : Atlantic / Lapo/ Hettich) ,handle, ball catchers including mortice locking arrangement (Make: Doorset / Godrej / Yale), hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces, complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old wooden Surfaces width or girth exc 10cm including preperation of surfaces, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces, complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old Steel Surfaces width or girth exc 10cm including preperation of surfaces, complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of OBD of any colour, complete all as directed. (Asian Paints,Berger)

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper on ceiling, complete all as specified and directed. (Asian Paints,Berger)

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required)

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade/ CPVC fittings such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI / CPVC tubing upto 1.5 m included in rates)

S&F in repairs small fittings galvanised iron medium grade / CPVC fittings such as socket, elbow, nipple, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI / CPVC tubing upto 1.5 m included in rates)

S&F in repairs PVC handle for low level flushing cistern, complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting, complete all as specified. Make of Pipe :- Plasto / Prayag / Finolex

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting, complete all as specified. Make of Pipe :- Plasto / Prayag / Finolex

S & F 20 mm dia Brass Elbow

S & F 20 mm dia Brass Elbow (3/4 x 1/2)

S & F Union 20 mm

S & F 20 mm dia Brass Tee

S & F Male Brass Threaded Adaptor (MTA/ MBTA) ) 20 mm dia

S & F Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia

S&F CPVC BALL VALVE of outer dia 20 mm

S&F CPVC Tank Adaptor of outer dia 20 mm

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme/ Vectus

S & F 75 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Finolex / Supreme / Vectus

S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:- Finolex / Supreme/ Vectus

S & F 75 mm dia PVC (SWR) pipes (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:- Finolex / Supreme / Vectus

S & F 50 mm dia Unplasticised PVC pipes of pressure rating (10 kg/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed. Make:- Finolex / Supreme / Vectus

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as directed

S & F 110 mm PVC (SWR) bends any radius

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal

S & F 110 mm PVC (SWR) Cowl

S & F 75 mm PVC (SWR) bends any radius

S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal

S&F 150 mm PTMT Symet Bath assest Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry Make Prayag,

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified & directed.

M&L for returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed.

M&L for Removing surplus excavated material to a dist not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified & directed.

M&L for cement concrete 1:4:8 type D2, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F in repairs factory made manholes covers with frame, medium duty conforming to IS:12592(2002) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles existing roof treatment of any type , like plastic felt/HP tiles including existing plastering /concrete in covering of any thickness including removal of debris to be disposed out side of MOD premises complete all as specified and directed.

Demolition of mud in roofs any thickness complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M & L brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in roof padding complete all as specified and as directed.

M&L 15 mm thick Screed bed or bedding layer of CM 1:4 mixed with integral water proofing compound as per manufacturere's instructions . (water proofing compound shall be measured and paid seperately) complete all as specified and as directed.

Supply only water proofing compound liquid @ 200 ml / per bag of cement complete all as specified and directed.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L preparation of RCC roof slab by removing dust, dirt & applying bituminous primer at 0.5 ltr per Sqm & providing 3mm thick APP modified water proofing membrane weight not less than 3 kg/Sqm reinforced with non woven polyester mat weight not less than 150 gms per Sqm including min 10cm side/over lap complete all as specified and as directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner, colour and pattern of tiles as approved by engr-in-Charge. (Note: There should be use of min. 3 mm thick spacer to fix tiles and making 3 mm wide joints between tiles)

Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyond out side MOD land complete all as specified and as directed.

M & L uprooting of plants (girth not exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :- Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M & L hard drawn steel wire fabric cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire S & F in reinforcement weight not exceeding 4.00 Kg/Sqm, complete all as specified and directed.

S & F brass mortice lock 65 mm 6 lever vertical type with duplicate key and handle set, complete all as specified and directed.

S & F in repair brass mortice lock 100 mm, 4 lever, vertical type, with duplicate key, complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ wall paneling, blankets, any thickness, including cover fillets and frame, complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet (colour as approved by Engr-In-Charge) instead of Plain colour PVC sheet inclusive of PVC frame work, solvent cement, screws, fasteners and all required accessories and fixing the sheet at site on PVC frame as per specifications and drawing including, complete all as specified and directed. Make : Rajshri

M & L for providing & fixing semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge

S & F in repair 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC. (Make : Prayag Cat No. 9375 or equivalent in Kohler/Jaguar/Hindware)

S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. Make : Hindware cat No. F160146 or equivalent in Kohler/ Jaquar

S&F in repair sinks with drainage board made of stainless steel 304 grade 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and cp waste fitting.overall size 915mmx460mm bowl size 410mmx330mmx160mm to be fix in the concrete slab and make good the damage portion, complete all as specified and directed.

Supply & fix in replacement 125mm dia chromium plated gratings over nahani / floor traps including embedded the same in white cement to match, complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20 to 22 mm thick laid over and including 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L Machine cut kota stone 15 to 18 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing, complete all as specified and directed.

S&F in repairs Stain less steel plate rack made of stainless steel 1mm thick of grade 304, size 900mmx 600mmx250mm, complete all as specified and directed.

Cutting openings, through brick walls built with of cement concrete for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective rick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m incl make good the damage portion by making jambs with Cement mortar / PCC as per requirement, complete all as specified and directed.

M&L12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required, complete all as specified and as directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed..

M&L for cement concrete type E-2, 1:5:10 (using 40mm graded stone aggregate) in mass concrete and filling in sunken portion, complete all as specified and directed.

S & F in repair vertical venetian blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed. Make : Vista /Hunter Douglas.

S & F in repair roller blinds of any size and any colour (non-blackout series) with aluminium head rail, with chain operation complete all as specified and directed by Engr-in-Charge. (Make: Vista/Hunter Douglas)

M&L for preparation of Old wall / ceiling surfaces & applying two coat of plastic emulsion paint of ant tint, using roller brush, complete all as specified and as directed.

M&L for applying two coats of interior wall texture paint of authorised manufacturer/applicator including preparation of surface complete all as specified and as directed. Make: Asian Royale/Berger

M& L for endura chequerd tiles 30 cm x 30 cm with 20 to 22 mm thickness of approved colour and design pattern (Square/ rectangular) as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Suply only in replacement 15mm bore sensortonic senser faucet cromium plated swan neck/high neck for washbasins deck mounted complete with controll Box (Battery operated) all as specified & directed. Make : Cera Cat No.: F6010108 or Jaquar Cat No SNR- CHR-51011

M&L for epoxy based floor painr / synthetic enamel paint for chequered tiles/ cement concrete flooring of required colour complete all as per directed by engr in charge.

Note :- The work described in these items shall be executed in bldgs up to (G+1 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes where required, for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. Note :- Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates.

UNIQUE BUILDERS (BID ID -3497814)

DEV CONSTRUCTION (BID ID -3508836)

sony engineering works (BID ID -3503003)

M/S GEETANJALI ENTERPRISES (BID ID -3502937)

MAA SANTOSHI ENTERPRISES (BID ID -3501339)

Akhil Enterprises (BID ID -3508726)