REPAIR REPLACEMENT MAINTENANACE AND PETTY REPAIR OF WIRING, FANS, GYSERS AND CONNECTED ACCESSORIES IN FACULTIES, SINGLE LIVING ACCN,CENTRAL AMENITIES VISHWAKARMA COLONY SHIVAJI COLONY, HASTKUSHAL COLONY , D FLAT , BRIG LANE, CAPT ACCN, MAP, MD ACCN

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :-

(a) One light point controlled by one switch

(b) One fan/exhaust fan point controlled by one switch and regulator

(c) Socket outlet, three pin 5 Amps on the same board

(d) Socket outlet, three pin, 5 Amp, independent

All as per item No . 2 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multi pin 15 amps socket outlet flush type on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

(a) One light point controlled by one switch

(b) One fan/exhaust fan point controlled by one switch and regulator

(c) Socket outlet, three pin 5 Amps on the same board

(d) Socket outlet, three pin, 5 Amp, independent

All as per item No . 4 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multi pin 15 amps socket outlet flush type on independent board.

S & F in replacement switch piano, flush type, single pole one way 5 amps complete all as specified and directed.

S & F in replacement switch piano, flush type, single pole one way 15 amps complete all as specified and directed.

S & F in replacement bell push flush type single pole one way 5 amps complete all as specified and directed.

S & F in replacement socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.

S & F in replacement socket outlet 5 in 1, 5 pin, 15 amps flush type complete all as specified and directed.

S & F in replacement switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F in replacement ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacement Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 1 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 2 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 3 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 4 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 6 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 8 module complete as per existing make and model all as specified and directed.

S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten(LED tube light fitting complete 20/22W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting.

S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten(LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks inch taking down old UNSV fitting.

S&F new generation energy saving LED Bulk Head fitting 10 Watt made up of Poly carbonate housing with diffuser incl taking down old UNSV fitting.

S&F LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old UNSV one.

S&F decorative wall light fitting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base incl LED lamp (cool/warm white) 9 watt incl taking down old UNSV one. Cat part No.HLWB-01-B22/E27 Make Halonix or equivalent

S&F in replacement IP65 new generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

Ditto- as per item No 34 above but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

Ditto- as per item No 34 above but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

Ditto- as per item No 34 above but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one. .

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 100 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

S&F in replacement MCB distribution board double door 240 volts 4 way with 100 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 63 Amps,415 V, AC incl taking down old unserviceable one complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular

All as per item No 47 above but of size 6 sqmm complete all as specified and directed.

All as per item No 47 above but of size 4 sqmm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specified and directed.

All as per item No 50 but of size 175 x 100 x 50mm complete all as specified and directed.

All as per item No 50 but of size 200 x 150 x 50mm complete all as specified and directed.

All as per item No 50 but of size 250 x 200 x 50mm complete all as specified and directed.

M&L in replacement of Hylam White 3 mm Electrical Switch Board Sheet, Finishing Type

M&L in replacement of LED Inverter Bulb 9 watt with inbuilt battery back up upto 4 hours cat part NO. SZBLV22009-IVB Make Shakti and Equivalent complete all as specified and directed.

S&F in replacement surface panel round Slim 18 watt 6500 K complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 63 Amps 16 kA incl taking down old unserviceable one.

S&F in replacement modular single phase motor starter for AC with green and red button complete all as specified and directed.

S&F in replacement modular 32 Amps DP switch without fuse complete all as specified and directed.

M&L for servicing repair/servicing at site of ceiling fan of any capacity complete incl carrying out lubrication, greasing and to make the ceiling fan noise free and smooth functioning, including replacement of worn out/unserviceable minor spare parts such as split pin, fan body bolts, spring washer, fan rod bolt, capacitor etc assembling the ceiling fan and testing to the entire satisfaction of user/engineer in charge and refixing the same at site. (Note :- Replacement of Major spares parts except specified above, flexible wire/rewinding of ceiling fan/shall be measured and paid separately under respective item) Note :- (a) Cost of labour for taking down and refixing of fan after servicing deemed to be included in the quoted rate of this item no extra shall be admissible to the contractor (b) Contractor team will report to AGE E/M Sub Div daily except Sunday and holiday at 0900 Hrs to collect ceiling fan complaints.

All as per item No 60 above but for exhaust fans of any size and capacity (metal body)

All as per item No 60 above but for exhaust fans of any size and capacity (PVC body)

All as per item No 60 above but for wall mounting/air circulator fan of any size and type

Taking down ceiling fans any type/sweep 230 V AC and refixing after cleaning and making connection complete.

M&L for rewinding of ceiling fan, of any make/type and size (1200/1400mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufactures specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of starter/rotor, capacitor, connection & testing complete.

All as per item No 65 above but exhaust fan upto 400 mm sweep working on 230 volts AC supply (metal body)

All as per item No 65 above but exhaust fans upto 300mm sweep working on 230 volts AC supply (PVC body)

All as per item No 65 above but wall mounting/air circulator fan of any sweep working on 230 volts AC supply

Labour for remetalling of worn out shaft of fan , cutting,brazing,machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the engineer satisfaction of engineer in charge to ensure smooth and noise free operation (bearing shall be measured and paid separately )

Supply only ball bearing of any size and type, suitable for any type/make/size of ceiling fan complete all as specified and directed.

All as per item No 70 above but for exhaust fan of any type/make and size complete all as specified and directed.

All as per item No 70 above but for wall mounted fan of any type/Make and size complete all as specified and directed.

S & F in repair fan hanging hook any type or size suitable to hang on wooden block, MS bar etc with rubber reel, nuts, bolts, split pin etc suitable for ceiling fan complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement ceiling fan down rod including drilling, cutting, threading & white painting for ceiling fan 1200/1400mm sweep of length 12" complete all as specified and directed.

All as per item No 74 above but of length (18") complete all as specified and directed.

All as per item No 74 above but of length (24") complete all as specified and directed.

All as per item No 74 above but of length (30") complete all as specified and directed.

All as per item No 74 above but of length (36") complete all as specified and directed.

All as per item No 74 above but of length (48") complete all as specified and directed.

All as per item No 74 above but of length (60") complete all as specified and directed.

Supply and fix PCB controller suitable for 240 V single phase supply for BLDC fan with PVC cover and all fixing arrangement complete all as specified and directed.

S & F in replacement canopy for ceiling fans upper and bottom (Set of two) complete all as specified and directed.

S&F in replacement louver shutter made out of MS sheet metal 1.2 mm thick for exhaust fan upto 400 mm size round or square as per site condition including fixing arrangement with fixing material complete all as specified and directed.

Supply and fix in replacement PVC terminal connector complete all as specified and directed.

S & F capacitor 2.5 mfd 230 volts complete all as specified and directed.

Supply only capacitor 4 mfd 230 volts complete all as specified and directed.

Supply and fixing of GI/ MS anodized bolts with anodized nuts, spring washers, split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole complete all as specified and directed.

S&F in replacement of fan blade of three pieces suitable for 1200mm dia ceiling fan complete all as specified and directed.

S&F in replacement of fan blade suitable for upto 300 mm dia PVC exhaust fan complete all as specified and directed.

S&F in replacement of PVC fan blade suitable for wall mounted fan upto 600mm dia complete all as specified and directed.

Taking down and refixing ceiling fan after replacement of fan rod with anti suicide fan rod (12") white, MS pipe zinc plated, 19mm OD, 1.8+/-0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 Kgf and above and spring hidden in the pipe will expand to about 1 mtr or more complete all as specified and directed.

All as per item No 91 above but of length (18") complete all as specified and directed.

All as per item No 91 above but of length (24") complete all as specified and directed.

All as per item No 91 above but of length (30") complete all as specified and directed.

All as per item No 91 above but of length (36") complete all as specified and directed.

Supply and connection of PVC insulated, unsheathed multi stranded, three core twisted copper flexible cable of size 1.5 Sqmm as required. .

M&L for spray painting of ceiling fan with first quality synthetic enamelled paint of approved colour all as directed and specified.

All as per item No. 97 above but for exhaust fan upto 450 mm complete all as specified and directed.

Repair to oscillation moving part of wall mounted fan including replacement of all worn-out components, bearing , lubrication and assembling complete.

M & L for servicing solar water heater (Flat Plate collector/tube collector) by removing the flange plates, cleaning the top glass, collectors internally & externally by using descaling solution, removing the blockages in the collectors complete and refixing the flange plates, recharging the water in recharge tank testing for satisfactory function all as specified and directed.

S & F heating element 25mm to 32mm dia, ISI marked for solar water heater of capacity 3 KW all as specified and directed by Engr in charge.

S & F flange plates of size 25 mm dia suitable for flat plate collectors including taking down old unserviceable flange plate all specified and directed.

S & F flexible heat resistance rubber pipe (from inter connect plate collector to hot water tank) of size 25 mm to 32 mm dia etc with fixing clamp etc complete all as specified.

Taking down the collector from its position, removing the top glass of collector and carry out welding/brazing work to the collector and arresting the leakages in the collector, refixing top glass back with all sealing agent, testing for satisfactory function all as specified and directed.

Steam Bath : Checking of electrical wire connection , level sensors, Heaters coil, earthing leakage, electronic circuits, control panel & safety arrangements of the water level & units. Cleaning the sensors, descaling of hard water tank, servicing of electrical, pneumatic valve, proper insulation for the boilers including replacement of defective spares and fixing the same with new including testing one etc complete. Note - (a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge. (b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt. (c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only".

Sauna Bath :- Checking of the heater coil, electronic temp control, calibrating temp device, accuracy, safety cut off the heater & cleaning the sensors of the electronic devices / equipments etc including replacement of defective spares and fixing the same with new including testing etc complete. Note - (a) Contractor has to visit the plant once in a month and carry out comprehensive maintenance as directed by Engr-in-Charge. (b) During emergency contractor has to visit the plant to rectify the fault without any extra cost to the Govt. (c) Any spares required during comprehensive maintenance and during emergency repairs shall be measured under respective item as " Supply only)

Supply only 15 psi safety valve (Pressure relief valve)

Supply only 240 V 5 amps glass fuse

Supply only auto drain solonied valve 12 volts 6 watts for steam bath.

Supply only water inlet solonoid valve 12 volt 6 watts for steam bath

Supply only Boiler insulation glass wool pad 25mm thick 40 Kg density with aluminium foil for steam bath

Supply only steam generator power heating element 3KW for steam bath

Supply only high limit temperature (i.e 105 degree) switch thermostat for steam bath/sauna bath

Supply only temperature sensor including extension wire of length 6 metre for steam bath

Supply only Digital Control steam processor circuit board for steam/Sauna bath.

Supply only step down Transformer with dual output primary 230 V and secondary 35 Volt 5 Amps for steam bath.

Supply only Mains power Terminal 4 way connector 63 amps

Supply only silicon heater washer

Supply only power contactor 40 Amps 440 volts, 50 Hz

Supply only temperature thermostat range 30 to 110 degrees.

Supply only 4 way channel terminal strip connector 32 Amps.

Supply only low density industrial Sauna heating element S/S 2000 watt.

Repair/checking of storage type water heater (geyser) of any capacity including replacement of required spares such as heating element thermostat, indicator, fusible plug dead weight, hot/cold water hose pipes incl any other repairs work at different locations within the CME all as specified and directed by Engr in charge for the Note : 1. Spare components will be measured and paid separately. 2. Contractor will detail mechanic to AGE E/M complaint cell at 0900 daily to collect docket.

Supply only thermostat complete with manually temperature setting knob extra long (11 inches) ISI marked suitable for geysers 25 liters to 50 liters capacity

Supply only thermostat with auto cut-out knob complete at tripping 90 degree (+5%) Temperature of length (7 inches) ISI marked suitable for geysers 25 litres to 50 litres capacity.

Supply only fusible plug ISI marked suitable for 25 to 50 litres capacity Geysers.

Supply only safety valve (to be fixed on outlet connection) ISI marked suitable for 25, and 50 litres capacity geysers.

Supply only heating element upto 2 KW as required at site including rubber washers (ISI Marked) suitable for Bajaj/Racold/Usha/Jaquar/Jilco/Crompton/ Havells make geyser complete.

Supply only non return valve(NRV) brass of 15mm bore, after dismantling old unserviceable NRV of any size all as specified and directed.

S & F Hot/Cold water flexible hose pipe 12/16mm dia and 450 to 900mm long heavy duty covered with metal wires heat resistance with both ends PVC hexagonal check nut with washer to fixed on 15mm dia GI pipe all as specified and directed.

M & L for preparation of steel surface of geysers , apply putty to make the surface smooth/ even and applying one coat of synthetic enamel paint white including writing of MES Nos with black paint complete all as directed & for any size or capacity of geysers .

Taking down loose geysers of any capacity from store/site & installing the same at new location within the CME complete with grouting of bolts & all necessary pipe connections and making good the disturbed wall surfaces all as directed. Note :- spares if required shall be measured and paid separately.

S & F GI tubing (Medium grade) with all fitting and fixed to complete on wall and ceiling or laid in trenches of size 15mm bore incl taking down old unserviceable one all as specified and directed.

M & L for stop valve, cast copper alloy, screw down high pressure, crutch handle screwed both end for iron pipe, fancy type, chromium plated for 15mm bore pipe incl taking down old unserviceable one .

M & L for Bib tap, fancy type, chromium plated for 15mm bore pipe

S & F gasket rubber ring for heater plate of any size geyser.

S & F indicator lamp of geyser 25-50 litres capacity of RED/GREEN colour.

S & F PVC copper conductor cable 3 core 2.5 sq mm flexible multistranded 1100 V grade unsheathed cable.

M & L for switch socket combination 2 in one 3 pin 16 Amps 240 volts flush type complete all as specified and directed.

M & L for plug top porcelain 3 pin 15/16A 230 V AC supply

Supply and laying in replacement of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for outer dia 16mm complete all as specified.

Supply and fix in replacement ball valve suitable for 16mm dia CPVC pipe complete all as specified and directed.

Supply and fix in replacement brass elbow suitable for 16mm dia CPVC pipe complete all as specified and directed.

Supply and fix in replacement brass tee suitable for 16mm dia CPVC pipe complete all as specified and directed.

M&L for lagging to pipes used for hot water supply 15 to 25mm dia or plumbing all round with 25mm thick bonded mineral wool pre-formed 'SNAP ON' pipes section of density 144 Kg/Cum, incl chicken mesh netting of 20mm mesh and 0.01mm thick aluminium foil cladding around the pipe complete all as specified and as directed by Engr-in-Charge.

Pritam Electro Mechanical Services (BID ID -3271290)

Priyanka Power line (BID ID -3272984)