REPAIRS/REPLACEMENT OF ROOF SHEET, ROOF WATERPROOFING, JOINERY AND OTHER MISC B/R ITEMS AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick in cement mortar (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

S&F in repairs plastic seat cover coloured closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device.

S&F in repairs homemade single bowl Stainless steel kitchen sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, bowl size 600mmx450mmx250mm all as specified and directed

S&F in repairs PVC valveless, syphonic action type 10 ltr capacity flushing cistern, lowlevel, white or coloured, with inlet, ball valve,float and handle including brackets.

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia..

S&F in repairs bib tap 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&Fin repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S & F in repair for chromium plated fancy shower rose with or without swivel joints of 65mm size

S&F PTMT grating of size up to 100mm (Minimum weight 25gms)

S&F in repairs PVC connection 15mm size with brass nut of 450mm long size

S & F in repair stop valve , chromium plated fancy typewith long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

Demolition of cement concrete concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed vy EIC.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6.

M&L Non Skid ceramic tiles 7 to 8 mm thick for coloured tiles (square rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm , in floors etc, set and ointed in neat cement slurry and painted in coloured cement to match.

M&L double charged vitrified ceramic tiles (any shade (light/dark) 8 to10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match.Note : Shade will be deciced by Engr-In-Charge.

M&L rendering 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L glazed ceramic tiles coloured in vertical surface 300x600/300x450x6mm to 7mm thick set and joint in neat cement slurry and pointed in colour cement to match (coloured tiles).

Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F staineless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

Dismantlling of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid, bedded & pointed in any mortar.

S & F hand cut cudappa stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed layer measured seperately complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

S & F in repair for vitreous china wash down WC Pan Pedestal pattern type including fixing.

S&F in repairs vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in cement mortar 1:2 in wall completed all as specified and directed..

Taking up or down tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

15 mm dia

20 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

15 mm dia

20 mm dia

S&F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

15 mm dia

20 mm dia

S&F of PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls

75 mm dia

110 mm dia

S&F of PVC(SWR) bends of any radius

75 mm dia

110 mm dia

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each.

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window/ventilators shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 4.0 mm thick n. exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm dia with stainless steel wire stapples/GI screws/wooden beadings

S&F figured glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane as per instructions of manufacturers complete all as specifed and directed

M & L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of nitoproof 100 & nitopro 120 on plastered surface.Rendering again 10mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600mm long 20mm dia spout light grade & 1:3:6 C2 filling ,floor area of wc upto 1.5Sqm etc complete all as specified and directed.

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under:- (a) Applying bituminous oil based primer on cleaned and dried surface @ 0.7 kg/sqm. (b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 - 0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. (c) Apply two coats of bitumastic - aluminium paint over the membrane. Note: Ser No. (a),(b),(c) shall be of same make.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing from site.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified.

S & F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

S&F Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete,conforming to Fe 410-W (Gde -E-250)quality -A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

Alpha Construction

MAHIMA CONSTRUCTION

Vinod Enterprises

Vishal Constructions

M/S SAMEER SUBHASH PATANI

sunway associates

Samruddhi Construction

M/s S.D Construction Co