Dindigul District Ayyampalayam Town Panchayat Retender 15 CFC - Tied -IInd Ins- Supply and Delivery of Open Well Submersible Motor 7.5 HP - 4 Nos and 1st ward Maruthanathi Dam near Vinayagar Kovil Open well weldmess cover slab-2 Nos in Ayyampalayam

Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B).

Plain Cement Concrete 1:4:8 mix (One Part of Cement, Four Part of Fine Aggregate and Eight Part of Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30. a) For Grade Beam

Plain Cement Concrete 1:2:4 mix (One Part of Cement, Two Part of Fine Aggregate and Four Part of Coarse Aggregate) Using 20mm ISS HBG Metal from approved Quarry including all cost conveyance of materials and labour charges for mixing,laying,finishing and curing etc. complete as per standard specifications and as directed by departmental Officers(TNBP No.28).

Reinforced Cement concrete 1:1 1/2:3 (One Part of cement, one and half Part of Fine aggregates and Three Part of Coarse aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Supplying, fabricating and fixing in position of mild steel angles,channels,I Sections,Gril Gate and Design Grill, including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials,Conveyence and all labour charges for fixing in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete as per standard specifications

Supplying and Fixing 7.50 x 5cm -10 Gauge Weld mesh Cover including cost of bolts and nuts, cutting all weld mesh sheets to required size if found necessary during execution etc. complete including cost and conveyance of all materials and all labour charges etc.complete as per Standard specification and as directed by the departmental officers

Painting with two coats of Approved colour of best quality synthetic enamel anti Corrosive paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A

Supply and delivery of Open well Submersible motor, Panel board,cables , HDPE, G.I.Pipes, Valves and Specials including cost for materials etc. complete i) Open Well Submesible Motor 7.5HP Pump set of 75Lpm X 100M Head of IS 14220/2002 With Panel Board WD-M1915

ii)16 Sqmm Submersible Cable

A RAMALINGAM CONTRACTOR (BID ID -1282900)