REPAIR TO ROOF TREATMENT AND OTHER MISC WORKS UNDER AGE BR II OF GE (WEST) FEROZEPUR CANTT

Amount

Demolation of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

All as per ser item No. 2 here-in-before but using old bricks retrieved from item No. 1 demolition including cleaning and removal of mortar from old bricks.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) and removing from site complete all as specified and directed. Note :- Demolition of mud puska to be cut in average thickness from top surface of roof for creating the slope as directed.

M&L cement concrete 1:2:4, type B-1, (using 20mm graded stone aggregate), 50mm average thickness as in roof padding complete all as specified and directed.

S&F 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

All as per ser item No. 7 here-in-before but except tiles.

M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately under relevant item.

M&L rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) with water proofing compound @3% by weight of cement or as per manufacturer instructions complete all as specified and directed. Note: WPC shall be measured and paid for separately under relevant item.

M&L rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (with using extra cement) with water proofing compound @3% by weight of cement or as per manufacturer instructions including taking out of cement plaster complete all as specified and directed. Note: WPC shall be measured and paid for separately under relevant item.

Supply only water proofing compound.

M&L applying one coat of cold applied polymeric modified bituminous primer @ 0.30 Kilogram per Sqm including preparation of roof surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and directed.

M&L APP membrane to be finished with one coat of solar reflactive bituminous based Aluminium paint @ 0.1 kg per Sqm complete all as specified and directed.

M&L applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in cement mortar 1:3 including mixing of polymer latex additives 60mm average thickness (Chajjas fins, borders etc) complete all as specified and directed. Notes: (i) Quantity of polymer to be used by 15 % by weight of cement. (ii) Use the electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hours as required. (iv) Keep the surfaces moist using water fog for 5 to 7 days etc. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 m.complete all as specified and directed. Make (Epoxy bonding agent): Krishna, Dr. Fixit, MC Bauchemie and M/s Chemistik.

M&L raking out joints / pointing including flush pointing in cement mortar 1:3 to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc in cement mortar complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.

M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

Removing and refixing of existing water tank of capacity exceeding 250 litre but not exceeding 500 litre etc setting aside (or lowering if required) for repair, cleaning etc and hoisting reconnecting & refixing in position complete all as specified and directed. Note: The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates.

Removing and refixing of existing water tank of capacity exceeding 500 litre but not exceeding 1000 litre etc setting aside (or lowering if required) for repair, cleaning etc and hoisting reconnecting & refixing in position complete all as specified and directed. Note: The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates.

S&F rotational moulded triple layered polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F rotational moulded triple layered polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and directed.

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair, complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing & refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note: The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing & refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note: The cost of new fittings and accessories, if required shall deemed inclusive of quoted rates.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm complete all as specified and directed.

All as per ser item No. 36 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

S&F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed.

S&F factory made pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmX60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild sttel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

All as per ser item No. 39 here-in-before but size 125mmx60mm with double rebate.

M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats, bed blocks, coping etc including necessary form work complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent in approved makes

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

Refixing of shutters in same opening of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

S&F factory made 30 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

S&F factory made 35mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm extruded Aluminium alloy handle complete all as specified and directed.

S&F 100mm extruded Aluminium alloy handle complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Aluminium alloy and fixed complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F butt hinges 100mm size exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and directed.

S&F butt hinges 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300mm mild steel rait rail rod pattern springs including roller and roller plate as fixed in repair complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares not exceeding 0.50 Sqm complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L 18mm / 19 mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/steel frame in repairs complete all as specified and directed.

M&L providing and fixing factory made PVC cup boards/ shelf / partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm X 18mm as per required length. The front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm width and 1mm thick PVC sheet using solvent cement etc. complete as specified and directed by engineer-in-charge, manufacturer's specificaton and drawing.

S&F extruded Aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and directed.

S&F continuous (Piano) hinges mild steel bright finish or Electro galvanized 25 mm wide flaps (when open) including welding to existing frame complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples in repair complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F 15mm bore stop valves, angle cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe in repair complete all as specified and directed.

S&F bib tap of chromium plated brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.

M/S KRISHNA ENTERPRISES

Kissan contractor and engg works