Special repairs to 06 toilet block at Depot area at Mil Stn Suranussi under AGE (I) Suranussi

Amount

Surface dressing not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

Dismantling of asbestos cement (Corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level. complete all as specified and as directed.

Dismantling, mild steel work of any description not otherwise provided for complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n exc 1.50 Sqm & removing from site complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed

Taking down shutter of area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed by Engineer - in - Charge .

Dismantling floor /Wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick/concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed

M&L for prepainted galvalume aluminum znic coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws Complete all as specified and directed

S&F Mild steel work conforming to Fe 290 Gde E-165 as in for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F Mild steel work conforming to Fe 290 Gde E-165 as in wind ties for roof, cutting tops to shape as directed , drilling holes, notching etc complete all as specified

M&L Brick work with sub Class'B' Bricks straight or curved on plan to any radius using old size bricks and built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as per Drg No CEJZ/TD-1019/08 Sheet No 1/3 to 3/3 :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : (i) Glass shall be measured and paid for separately. (ii) Requisite Drg has not been made part of tender documents (though applicable) & can be same in the office of AGE (I) SNS during working hours

Ditto all as per item No 15 above but with Gauged shutter complete all as per Drg No CEJZ/TD-1020/08 Sheet No 1/3 to 3/3. Note : (i) Wire gauge shall be measured and paid for separately. (ii) Requisite Drg has not been made part of tender documents (though applicable) & can be same in the office of AGE (I) SNS during working hours

Supply & fixing 35mm thick 2nd class hardwood (factory made) plain framed panelled shutters (two panels) with lock rail and panels of 12 mm thick veneered particle board with commercial veneering on both sides or 9mm thick BWR commercial ply and fixed to chowkat/frame complete. The size of rails and styles of 2nd class hard wood as per IS 1003 (Part-I). Kiln seasoned & chemically pressure treated complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer complete all as directed.

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm each panes complete all as specified.

S & F aluminium anodised tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .

Taking down steel water tubing 15mm bore and connections incl cleaning for refixing or removing to store. complete all as specified and as directed

Ditto all as per item No 22 above but 20mm bore tubing. complete all as specified and as directed

S&F tubes medium grade galvanized 15mm bore with all fittings and fixed complete to walls, ceilings or laid in floors etc complete.

Ditto all as per item No 24 above but 20mm bore tubing.

S&F in repair stop valves15 mm , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed.

Ditto all as per item No 27 above but 20mm bore.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs.

S&F in repair bib taps , 15mm dia cast copper alloy chromium plated , with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule and all as specified and directed.

S&F in repair gratings doom 140mm dia of PTMT (Min wt 50 gms).

S&F in repair grating doom 125mm size with waste hole (Min wt 40 gms).

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for rendering 12 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 other than fair faces of brick wall surfaces and surface finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for 5 mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement to ceiling/chajja’s complete all as specified.

M&L for preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete.

M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed.

M&L for complete removal of existing treatment, preparation of surfaces of walls and applying two coats of oil bound distemper complete all as directed.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of cement base paint on walls including prepration of the new surface etc complete all as specified.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and directed.

S&F solid PVC door frame of sie 50mmX47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed complete all as specified and directed by Engr-in-Charge.

S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified.

S&F 150 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified.

S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap, PCC (1:2:4) for fixing bolts / but excluding flushing cistern and flush pipe complete all as directed.

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

S&F in repair pvc connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 20mm size stop valves PTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including 20mm bore ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, specified in SSR Pt-1 complete all as specified and as directed.

S&F in repair PVC SWR pipe 110 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified.

S&F in repair PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified.

S&F 100 dia PTMT grating doom (min wt 25 gms) complete all as specified.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , incl over 15 mm thick screed or bedding layer in CM 1:6.

M&L for glazed ceramic tiles colouredof size 450 mm x 350 mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6 type C2 as in plinth protection with using 40mm graded stone aggregate etc all as specified.

M&L for 100mm thick cement concrete type PCC 1:4:8 type D-2 using 40MM graded stone aggregate as in sub floors/Sub base complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-0 as in base of floors complete all as specified and directed.

Material and labour for 20cmx20cmx25mm thick coloured chequred cement concrete tiles with grey cement and pigment, set, jointed and pointed neat cement slurry in floors , paths and aprons etc laid over and including 15mm thick cement screed or bedding layer in cement mortra (1:6) complete all as specified and directed by the Engineer-in-Charge. Note :- PCC sub base shall be measured and paid under respective item of BOQ.

Matarial and labour for cement concrete(1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching like works complete all as specified & directed by the Engineer in Charge. Note :- Form work shall be deemed to be included in unit rate quoted.

S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified.

S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap cast copper alloy, with capston head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe etc all as specified and directed by engineer-in-charge.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX 265mm, white with grating and union for discharge pipe including waste pipe complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or man holes, cesspits etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.

M & L 150mm dia (internal) SGSW pipes grade ‘A’ laid in trenches and jointed all as specified and directed by Engineer - in - Charge.

Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia (internal) after these are laid in trenches all as specified in clause 16.8.2 & 16.8.4 of MES-SSR-Part-I 2010 and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer-in-Charge.

Manhole for 10 users all as specified and as shown in drgs. Note :- (a) Form work shall be deemed to be included in unit rate quoted. (b) Reinforcement shall be measured & paid seperately.

Sokage well exc in ordinary soil, foundation in PCC 1:3:6 wells of honny combed and solid in M-25 concrete, incl. intercepting chember, screen chamber bricks work in CM , RCC cover slab in M-25/RR /Masonary/Filling with brick bats , complete of size 1.8 mtr dia x 3.0 m effective depth complete all as per Drg No CEJZ/STD-242/07 Sheet No 9/24 to 12/24.

Septic Tank for 10 users with Upflow filter including media, Excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers incl. RCC Precast manhole cover having 6 mm plate embeded all around/ fiber reinficed cover with angle iron frame vent shaft & sludge chember etc complete all as per Drg No CEJZ/STD-242/07 Sheet No 17/24 to 19/24.

Taking down carefully surface aluminium or copper point wiring on TW Batten/in conduit/ with PVC casing-caping/conduit (light, fan, socket, or power) complete and making good the disturbed surface of wall/celling etc including taking down fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and removing material from site aii as specified.complete.

M & L for concealed Point wiring complete with 1.5 Sqmm (nominal area) 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable in and including heavy duty PVC conduit not less than 20 mm (wall thickness 1.5 mm ) including fitting & accessories, with MS concealed terminal boxes with 3 mm thick laminated baklite (Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controled by one switch and (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm. solid copper conductor with green FR PVC insulating earth common earth dolly, complete all as specified. Note : Cost of cutting chases & making good shall be deemed to be included in unit rate quoted.

Supply & Fixing switch piano flush type single pole one way 5/6 amp complete.

Supply and fixing angular lamp holder insulated body with back plate including LED lamp 7 Watt suitable for pendent fittings complete complete all as specified and directed.

Supply & fixing exhaust fan 300 mm sweep heavy duty,AC single phase 230/240 volts metal body with louver shutters including making circular hole in existing wall to accommodate exhaust fan and necessary civil work and making good surface complete all as specified and directed.

Supply & Fixing ceiling rose surface backelite 65 x 50 mm three terminals complete all as specified and directed.

Supply and fixing sheet steel enclouser with double door, detachable gland plates flush/surface mounting for MCB fitted with bus bar, earth bar and neutral link 2 way SPN 240 V complete all as specified and as directed.

Supply and fixing MCB SPN 40 Amp 10 KA 'B' curve 240 Volts complete all as specified and as directed.

M & L for submain wiring with two runs of single core PVC insulated unsheaapproved copper conductor multi stranded cable of size 4 Sqmm 1100 Volts grade down PVC concealed conduit (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4 sqmm single core copper counductor multi stranded PVC insulated unsheathed cable as earth wire countinuity conductor complete all as specified and directed by Engr-in-charge Note :- Two runs of 4 Sqmm cable & one run of 4 Sqmm cable as earth continuity conductor and one run of PVC conduit shall be measured & paid as one unit length.

Supply and fixing of LED lights fitting 1 x 20 W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complect as specified.

Material and labour for Sand filling under floors in foundations including watering and consolidation.aii as specified and directed. Note :- Punned down thickness of sand shall be accounted for payment.

Supply and fix common burnt clay building brick Sub class B designation 75 all as specified and directed.

Supply ,laying and testing cable XLPE insulated ,screened ,PVC bedded ,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 6 sq mm 2 core. Note :- (a) Execuvation and earthwork shall be measured & paid seperately. (b) Sand cushioning & cable cover shall be measured & paid seperately.

S&F,25 mm bore GI tubing "light garde "in treches on pole for protection of cables complete all as specified & directed by Enginner-in Charge. Note :- Execuvation and earthwork shall be measured & paid seperately.

SONA BUILDERS

SUNRISE CONSTRUCTION COMPANY