REPAIR TO CERTAIN OTM ACCOMMODATIONS UNDER AGE BR I AT AMRTISAR CANTT

Amount

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 02 above but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused ).

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 12 mm thick on brick work or concrete surfaces on walls in cement mortar 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:4 finishing fair and even without using extra cement complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors/walls etc.laid, bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, unifoRunning Metre colour of each stone size not exceeding 0.25 Square Metre fixed over 10mm thick plaster in cement mortar 1:3 with and including, making V groove at top, bottom & sides of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment and fasteners complete all as specified and directed.

Material and Labour for textured interior paint of required shade on new plastered vsurfaces (Two or more coats applied @ 3.28 litre/10 Square Metre) over and including priming coat of interior primer applied @ 2.20Kilogram/10 Square Metre complete all as specified and as directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 Square Metre each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 10 above but size of opening exceeding 1.5 Square Metretr but not exceeding 4 Square Metre.

Taking down Shutters of any description of size not exc 1Square Metre each complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and directed.

Supply and fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in bed blocks for hold fast & similar work etc including necessary cuttings, form work etc.complete all as specified and directed

Supply and fixing factory made IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats incl. a shope coat of pink primer complete all as specified and directed. (Glazing / wire cloth shall be measured and paid for separately)

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Supply and fixing in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed in repairs with stainless steel wire staples complete all as specified and directed

Supply and fixing in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed.

Material and labour for two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new surfaces complete all as specified and directed.

Supply and fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

Supply and fixing 150mm long Aluminium handles, cast type anodised complete all as specified and directed.

Supply and fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter and Supply and fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 Square Metre in each pane including and glazing with oil putty/wooden beading as per site requiremnets complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll form process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: In case of variation in profile dimensions on higher side, no extra payment on this account shall be made to contractor .Glazing shall be measured and paid for separately.

Supply and fixing in repair powder coated aluminium frame for doors ,windows, ventilators, partition with one or more rebates including joining cleats, rubber neoprene packing for fixing complete all as specified and directed ( Min. thickness of powder coating 50 micron). Glazing shall be measured and paid for separately.

Supply and fixing in repair powder coated aluminium glazed shutter(for doors ) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading complete all as specified and directed. ( Min. thickness of powder coating 50 micron). Glazing shall be measured and paid for separately.

Supply and fixing in repair Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed (Min. thickness of powder coating 50 micron). Glazing shall be measured and paid for separately.

Supply and fixing in repair Anodised aluminium grill of approved design/pattern, with approved standered section and fixed to the window frame with CP brass/SS screw@ 200mm c/c, including cutting the grill to proper opening size for fixing and opration of handle and fixing approved anodised aluminium section around the opening all complete as per requirement and direction.

Taking down aluminium door shutters of area exc 1 Square Metre but n.exc 2 Square Metre each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified and directed.

All as per item No 31 here above but area not exc 1 Square Metre each window shutters.

Supply and fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 Square Metre in each pane including rubber packing and aluminium beading complete all as specified and directed.

Material & Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required complete all as specified and directed.

Material & Labour for providing and fixing toughned glass 08mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required complete all as specified and directed.

Material & Labour for providing and making toughned glass (of any thickness) to frosted by using process of controlled thermal and chemical treatments , Acid-etched glass; of approved shade & design complete all as specified and directed.

Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Supply and fixing door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm complete all as specified and directed.

Supply and fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.

Dismantling structural steel work in doors, gates, Trusses, etc. in any position complete all as specified and directed.

Supply and fixing Steel work in tubular trusses including special shaped washers etc. using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding including backing layer of any thickness, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fixing glazed ceramic coloured designer tiles 450x300mmx7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed. Note: Colour and design of tiles shall be as per approval of Engineer-in-charge.

Material and labour for for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, in floors etc shade as approved by Engr-in-Charge set and jounted in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:6 all as directed. Note: Colour and design of tiles shall be as per approval of Engineer-in-charge

Material and labour for Vitrified ceramic light shade tiles 9 to 10 mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 Square Metre in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.Note: Colour and design of tiles shall be as per approval of Engineer-in-charge

Supply and fixing in repair of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore complete all as specified and directed. Make: CERA/Kerovit/Jaquar

Supply & Fixing in repair vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply and fixing in repair Vanity of size 820mmx450mm with vitreous China wash basin white,with suitable size including CP waste coupling 32mm bore,waste PVC pipe complete all as specified and directed.

Supply and fixing in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle Note: Colour and design of tiles as per approval of Engineer-in-charge.

Supply and fixing in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed.

Supply and fixing in repair Pillar taps mixture 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed.

Supply and fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs and removal material complete all as specified and directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), roof treartment if any complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete of required thicness as directed fair finished, roof curbs, mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and as directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Square Metre including priming coat, cleaning surfaces etc. complete all as specified and as directed.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Square Metre reinforced with polyester non wove fabric (weight not less than 150 gms/Square Metre) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms complete as per manufacturer's instructions and all as specified & directed.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:4 and joints grouted and pointed flush in cement mortar mixed with 5% crude oil by weight of cement complete all as specified and as directed.

All as per Srl Item No.63 here-in-before but except brick tiles. Note:-Old serviceable tiles obtained from demolition shall be reused.

Disconnecting existing tank 1000 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tanks 500litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

S & F in repair 5 mm thick interlocking PVC wall lining consisting of plain colour PVC sheet 1 mm yhick inclusive of solvent cement,PVC frames,PVC fasteners/SS screws and all necessary items like C-section at edges/L-section at corners of matching colour etc for fixing at site complete all as specified and directed.

Dismantling boarding including frame work , any description , fixed in any position with screws complete all as specified and directed.

Material and labour for 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially foRunning Metreulated jointing compound and 48 mm wide fibre tape to provide seam less finish including two coats of distemper as required complete all as specified and directed. (Frame work for ceiling shall be measured and paid for separately)

Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/inteRunning Metreediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the inteRunning Metreediate channel with connecting clips across the inteRunning Metreediate channel at 457 mm centre to centre complete all as specified and directed.

Material and labour in repair for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over and including anodised aluminium snap grid 600mmx600mm frame work, reinforced with G.I. wiremesh complete all as specified and directed.

Supply and fixing in reapair 25mm dia stainless steel Curtain rods/ rails fancy type, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc.complete all as specified and directed.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof/wall coverings complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.

Supply and fixing in repair 100mm bore PVC (SWR) gully trap, plain with grating including jointing with solvent cement complete all as specified and directed

Supply and fixing in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts incl white seat cover with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe). Make: CERA/Jaquar/Somany/Parryware

Supply and fixing in repairs vitreous china squatting pan of Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including making good the dismantled portion to match with existing surface of floor all as specified and directed. Make: CERA/Jaquar/Somany/Parryware

Supply and fixing in repairs 10 ltrs capacity PVC valveless syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia comlplete all as specified and directed. Make: CERA/Jaquar/Somany/Parryware

Supply and fixing in repairs plastic water closet seat cover white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed. Make: CERA/Jaquar/Somany/Parryware

Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain all as specified and directed.

Supply and fixing in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut complete all as specifed and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

Supply and fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed.

Supply and fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators, etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items shall be made as per schedule of credit) including necessary cuttings/chases and making good disturbed surface of walls, floors, ceiling, etc.as per existing complete all as specified and directed.

Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 Square Metrem ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken teRunning Metreinal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 Square Metrem single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly complete all as specified and directed. Note : Switches. sockets, regulators, ceiling roses, lamp holders etc. shall be measured and paid for separately. a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way

b). For one three pin socket outlet 5 Amps independent board complete

c) For one three pin 5 Amps socket outlet on the same board with other switches

d) For one light point controlled by two way switch

All a per item No 92 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 Square Metrem ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken teRunning Metreinal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 Square Metrem single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly complete all as specified and directed. Note : 1. Switches, sockets, regulators, ceiling roses, lamp holders etc. shall be measured and paid for separately. a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way.

b). For one three pin socket outlet 5 Amps independent board.

c) For one three pin 5 Amps socket outlet on the same board with other switches.

d) For one light point controlled by two way switch.

All a per item No 97 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete all as specified and directed.

Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed.

Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed.

Supply and fixing ceiling rose 65X50 mm three teRunning Metreinals complete all as specified and directed.

Supply and fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.

Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed .

Supply and fixing in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and dircted with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement MCB single pole 6 to 32 Amps complete all as specified and directed.

Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed.

Supply and fixing in replacement 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.

Supply and fixing in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps complete all as specified and directed.(for AC and geyser).

Supply and fix in replacement ,Fresh Air fan of size 250mm, Plastic body 1200 RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan complete all as specified and directed. Note: Making suitable opening for fixing air fan if required shall be deemed included in the quoted rate of item.

Supply and fix in replacement , Exhaust fan of size 300mm, Heavy duty 1200 RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Note: Making suitable opening if required for fixing exhaust fan shall be deemed included in the quoted rate of item. Note for Sr item no - 129 and 130 Old retrieved material shall be deposited in MES store yard.

Supply and fix in replacement LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and fix in replacement LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and fix in replacement SMD/PLUTO NEO LED luminare 36/40 watt 600 x 600 mm 220 V AC LED ceiling light recessed/surface type with high efficiency PMMA diffuser soft glass free light complete with driver ,holders and LED lamps stable for roof/ceiling including fixing arrangements and connecting with copper wire flexible three core 1.5 Square Metrem PVC insulated 3 core cable from ceiling rose to light fitting complete all as specified and as directed.

Supply and fix in repalacement decorative Ceiling light 12 watt light fitting LED type with accessories including any type complete all as specified and as directed.

Supply and fixing in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 Square Metrem 2 core cable complete all as specified and directed.

Supply and fixing in replacement, Sub main wiring with two single pole 6 Square Metrem (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 Square Metrem (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 : Two runs of 6 Square Metrem main cable one run of 6 Square Metrem for earth cable shall be measured as one unit/ one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 6 Square Metrem (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 Square Metrem (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1: Two runs of 6 Square Metrem main cable one run of 6 Square Metrem for earth cable & conduit shall be measured as one unit/ one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 4 Square Metrem (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 Square Metrem (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 : Two runs of 4 Square Metrem main cable one run of 4 Square Metrem for earth cable shall be measured as one unit/ one running metre.

Supply and fixing in replacement, Sub main wiring with two single pole 4 Square Metrem (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 Square Metrem (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 :Two runs of 4 Square Metrem main cable one run of 4 Square Metrem for earth cable & conduit shall be measured as one unit/ one running metre.

Matterial and labour in repair for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below noRunning Metreal ground level) with top edge of the plate not less than 1.5 mtr below noRunning Metreal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work including charcoal dust & salt in alternate layers, 25 mm dia light grade, funnel, wire mesh, plain concrete 1:3:6 type C-1 for pit, RCC pit cover, 20mm dia watering pipe, bends, elbows complete all as specified and directed. Note : RCC pit cover shall be precast of RCC 1:2:4 type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Square Metre.

Sai Construction Co. (BID ID -3335475)

M/s. M Company (BID ID -3326612)