REPAIR TO FLOORING TILING, PLINTH PROTECTION, MASONRY WORK, PLUMBING WORK, SANITARY FITTINGS AND CONNECTED WORK IN OTM ACCN IN THE AOR OF AGE BR-II UNDER GE(WEST)PATHANKOT

Amount

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.(Note:- WPC shall be measured and paid separately)

M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.

M&L for rendering 10 mm thick in cm 1:6 on other than fair faces of brick work , concrete surfaces of wall,finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

M&L for Preparing newly plaster surfaces & applying two coats of cement base paint over a Coat of Cement Primer of, any colour complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion finished without any brush marks on the surface including a coat of primer as per manufacturer instruction complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall, rubbing down and stopping of paintaded surface and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall, rubbing down and stopping of paintaded surface and applying two coat of cement base paint complete all as specified and as directed.

Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .

M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base finished surfaces of concrete to be even and rough to receive the topping layer complete all as specified and as directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for RCC structures including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.

M&L for providing Precast Cement Concrete Type B-1 1:2:4 (using 20mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc.) , water troughs and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed. Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar ( 1:6) complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone in riser of steps, skirting, dado and pillar 20-25mm thick over cement cement backing and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete including 10 mm thick screed bed in cement mortar ( 1:4) complete all as specified and directed by Engr-in-Charge.

M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for Coloured machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded glossy finish with grey cement and pigment complete all as secified and as directed. Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks (50% yellow and 50% Red) & laying pattern approved by GE.

M&L for Coloured machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade rubber moulded glossy finish with grey cement and pigment complete all as secified and as directed. Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks (50% yellow and 50% Red) & laying pattern approved by GE.

M&L for sand filling under floors or in foundations including watering and consolidation or layer of sand cushioning below interlocking paver block complete all as specified and as directed.

M&L for Cement Concrete , 1:2:4, type B1 (20mm graded aggregate) as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and as directed by Engr-in-Charge.

M&L for grinding and polishing to old kota stone flooring to obtain mirror finish complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed .

M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for joint free non skid coloured Ceramic tiles 07mm to 08 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for joint free non skid coloured Ceramic tiles 07mm to 08 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing in CM 1:4 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for joint free non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

S&F in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S&F in repair Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 & n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 & n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

S&F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms)

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

M&L for 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

M&L for 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed.

S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.

S&F in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.

S&F in repairs vitreous china under Counter Basin With Fixing Accessories, snow white, Size: 560x400x205 mm, of oval shape fixing complete with accessories such as CP waste coupling, waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipecomplete all as specified and directed by Engr-in-Charge.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed.

S&F in repair 450mm long PVC connection 15mm size with PTMT nuts

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs brass CP Pillar cock fancy type 15 mm bore, with 140mm extension body screwed down, with crutch handle screwed both end high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as spd & directed.

S&F in repair CP stop cock/angle valve cast copper alloy fancy type screwed down high pressure ,with capstan heads screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed

S&F in repair stop valves/ Angle valve (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with capstan heads , screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. Make Jaquar Cat part no. Health Faucet ALD-563 or equivalent in any of the make metnioned in list of product.

S&F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make : ACN-1173 of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair chrome finish Toilet paper Roll Holder with fixing arrangement complete all as specified and as directed.

S&F in repairs of overhead shower 100mm dia round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system complete all as specified and as directed. Make : OHS-1989 of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repair of wall mounted shower arms casted 190mm long light body round shape with flange complete all as specified and as directed. Make : SHA-477 of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repairs of 15mm bore brass chromium plated wall mixer with provn of overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down, high pressure complete all as specified and as directed. Make : CON -237KNUPR of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repairs of 15mm bore brass chromium plated centre hole basin mixer without popup waste system with 450mm long braided hoses, screwed down complete all as specified and as directed. Make : ACN-167KNB of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repairs of CP Grating with hole /with out hole of dia 125 mm complete all as specified and as directed.

S&F in repairs of sinks made of stainless steel 1 mm thick kitchen with plugs washers and wastes, including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 and exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm & but not exc 2.0 sqm each complete all as specified and as directed.

M&L for 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M&L for factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

S&F of mild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or grith and apply one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint finished without brush mark on surface complete all as specified and as directed.

S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

S&F solid PVC door frame of size 50 x 47mm made out of 5mm wood grain printed & edges will be painted to match with painted sheet, PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed

S&F Aluminium handles, fabricated type, anodised Size of handle in 125mm complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified and as directed.

S & F in repairs of 2 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.

M&L for Dismantling of wall and ceiling boards (fibre, plup, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 2mm dia GI bar hangers fixed with steel from purlins of the roof with hold down clips (Wt-0.0035 Kg/clip) complete all as directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. Note :- PVC frame shall be measured and paid for separately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F in repair of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and as directed.

S&F in repairs of 110 mm bore PVC (SWR) bends complete all as specified and as directed..

S&F in repairs of 75 mm bore PVC (SWR) bends complete all as specified and as directed.

S&F in repairs of PVC (SWR) 75mm bore 'T' equal or unequal complete all as specified and directed.

S&F in repairs of PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S&F in repairs of 75mm PVC(SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed.

S&F in repairs of stainless steel curtain rod 20 mm dia, 1mm thick with 6 Nos of PVC ring, heavy duty, per meter length will be provided complete all as specified and as directed.

S&F in repairs of stainless steel chromium plated curtain rod brackets with fancy type stainless steel finial heavy duty suitable for 20mm dia rod complete all as specified and as directed.

S&F in repair of 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & Fin repair of Sheet glass figured, pin head type or-dinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane , 3.0 mm thick complete all as specified and as directed.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 31,486.00 and any other reduction if any from quoted amount.

GANDOTRA CONSTRUCTION CO (BID ID -3087614)

JP AND CO. (BID ID -3093418)

Abrol construction co (BID ID -3084516)

Ambika Construction Co (BID ID -3087137)

INDERJIT SINGH (BID ID -3086958)

dadwal engineers (BID ID -3085984)