PROVN OF GYM AT BLDG NO GH-87, PROVN OF UNIT SHOP, OHT STAGGING NEAR ARJUN MESS AND IMPROVEMENT TO ELECTRIC FITTINGS/FIXTURES INCL CONNECTED WORKS IN ARJUN MESS AT DSSC WELLINGTON.

Amount

B/RPORTION Demolition of unreinforced plain cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing unserviceable debris from site complete all as specified and as directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

M & L for providing precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) set in CM (1:6) complete in walls all as specified and as directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for providing RCC (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in arch beams, cantilevers, bressummers, lintels over 1.5 m span etc., complete all as specified and as directed.

M & L for use and waste of timber as in formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc., also splays between floors and beams, etc., for fair finished surfaces of concrete flat all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Description all as per Item No 8 above, but 5 mm dia and over upto and including10 mm dia as in stirrups, spacers and binders all as specified and as directed.

M & L for vitrified ceramic jointless tiles 8 to 10 mm thick, light shade (square/rectangular) polished, area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles, laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Description all as per Item No 10 above, but on vertical surfaces such as skirting, dado etc., laid over and including 10 mm thick rendering/ backing coat in CM (1 :4) complete all as specified and as directed.

M & L for digital non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular ) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for digital glazed ceramic coloured tiles of size 600mm x 300mm x 8-10mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering/ backing coat in CM (1:4) complete all as specified and as directed.

M & L for providing and laying 20mm thick and 20mm depth PMM (Polymer Modified Mortar/ Fibre Reinforced Mortar) for joining existing and new brick /solid PCC block work /RCC members as per manufacturer's instructions complete all as specified and as directed. Make : Asian/Cico/STP/ Fosroc

M & L for preparation of new plastered surfaces of walls and applying two coats of Asian Paint Royale Shyne paint (coloured/white) over a coat a Deco prime primer with brush /roller, finished even and smooth with one coat of acrylic wall putty complete all as specified and as directed.

M & L for preparation of existing treatment from old plastered surfaces of walls and applying two coats of Asian Paint Royale Shyne paint (coloured/white) with brush/roller, finished even and smooth with one coat of acrylic wall putty complete all as specified and as directed.

M & L for preparation of existing treatment from old plastered surfaces of walls and applying two coats of external weather coat over a coat of Deco prime primer with brush/roller, finished even and smooth complete all as specified and as directed.

Taking down aluminium window door exc 4 Sqm each complete all as specified and as directed.

Demolition of brick work /precast concrete article built in cement mortar any description and removing unserviceable debris off the premises complete all as specified and all as directed.

M & L for UPVC white/ coloured door all as per manufacturer's direction and following specifications all as directed :- (i) The profile for costruction of UPVC Door shall be of overall size 60 x 58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. (ii) The corners shall be plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm + or - 0.1mm. (iv) The door shall be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 Nos on each side. (v) The top portion of door shall be provided with plain glazing of 6 mm thick fixed to door shutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick. (vi) The bottom portion of door for 1 m height shall be provided with UPVC hollow board not less than 6 mm thick. (vii) The door shall be provided with :- (a) Moritise lock of brass size minium 100mm four lever with two keys as per manufacture's specification and instruction. (b) Two Nos of fan light pivot size 170mm on one shutter. (c) 03 Nos of 3D hinges on each shutter. (viii) All the fittings shall be provided with using self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engr-in- Charge. Make: Madhu Industries / AMD Overseas Ltd/Gadli Industries/ Simta Astrix.

M & L for modular false ceiling systems in ArmGym-FB for vinyl face, washable metallized polyester foil backing vinyl covered edges of 09mm thickness of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm and fixed with bottom face powder coated suspension system (Grid). The size of the same is 24mm x 32mm. The galvanized iron sheet of thick 0.30 mm used in the manufacturing of grid is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as per manufacturer's instruction and as directed. Make: Armstrong/ Diamond/ Saint Gobain.

M & L for 500 x 500 x 20mm thick inter locking rubber tile flooring laid and pasted with suitable glue pigment to match the shade of the surface complete all as specified as per manufacturer's instruction and as directed.

M & L for White/ Coloured UPVC fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (i) UPVC ventilator frame shall be made of PVC material confirming to IS 10151. The ventilator frame shall be made of extruded UPVC section having overall dimension of 60 x 60 mm having wall thickness 2.5 mm ± 0.2 mm. (ii) Corners of wall frame shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (iv) Glazing shall be provided with 6mm thick frosted glass fixed with appropriate size beading as per manufacturer's specifications/ instruction. Make : Madhu Industries/ AMD Overseas Ltd /Gadli Industries/ Simta Astrix.

S & F aluminum anodized door /windows shutters or frame etc., with one or more rebates using suitable size of standard aluminium sections including door stopper, including necessary joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading screws complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing wooden fillets /rubber beading in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M & L for Granite stone slab flooring in skirting 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white/ coloured cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required, laid over and including 15mm thick rendering/ backing coat in CM (1 :4) to be fixed on door /window cladding /openings complete all as specified and as directed.

S & F looking mirror of any size using 6 mm thick mirror edges rounded fixed with studs fixed to wall with chromium plated studs complete all as specified and as directed.

S & F vitreous china coloured WHB of Make: Jaquar, Cat No : CNS-WHT-705 or equivalent in Prayag/ Parryware/ Hindware/ Cera, oval shaped counter top of min size 595 x 420 x 200 mm including waste coupling, PVC waste pipe etc., complete all as specified and as directed. Note : Granite slab for mounting WHB shall be measured and paid separately under respective item of this schedule.

S & F bevelled edges looking mirror of any size using 5 mm thick fixed with clips /studs fixed to wall with suitable glass screws complete all as specified and as directed.

S & F corner glass shelf of Make : Jaquar, Cat No : ACN-1173 or equivalent in Prayag/ Cera/ Parryware/ Hindware complete all as specified and as directed.

S & F vitreous china wash down water closet of Make : Parryware (Cascade Classic), Cat No: C0217 (Coupled Closet) & C0711 (Cistern) or equivalent in Jaquar/ Prayag/ Hindware/ Cera, white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including cistern complete all as specified and as directed.

S & F CP Health faucet of Make : Jaquar, Cat No : ALD 573 or equivalent in Prayag/ Cera/ Hindware/ Parryware with two way bib taps 15 mm bore of Make : Jaquar, Cat No : QQT-7041 or equivalent in Prayag/ Cera/ Hindware/ Parryware and flexible tube 1 Mtr long complete all as specified and as directed.

S & F toilet paper holder of Make : Jaquar, Cat No ACN-1151N or equivalent in Prayag/ Parryware/ Hindware/ Cera, stainless steel fixed to wall with chromium plated brass screws all as specified and directed.

S & F hand drier automatic type of Make : ABS hand drier KH07 or Kallerians or equivalent in Jaquar/ Cera complete all as specified and as directed.

S & F central hole basin mixer of Make: Jaquar, Cat No : CQT-23167B or equivalent in Cera/ Prayag/ Hindware/ Parryware, without popup waste system with 450mm long braided hose pipe complete all as specified and as directed.

S & F two piece type stainless steel gratings square or round 100 mm size complete all as specified and directed.

M & L for 32mm bore brass chromium plated bottle trap for wash hand basin with inlet and outlet, screwed for pipe or connections and with one cleaning cap and fixed complete all as specified and as directed.

M & L for 100 mm (outlet) dia PVC floor trap with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.

S & F for 75mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to wall with suitable MS clamps complete all as specified and as directed.

S & F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F for 110mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F PVC (SWR) bends 110mm bore complete all as specified and as directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and as directed.

S & F towel rack of Make : Jaquar, Cat No : ACN-1181N or equivalent in Prayag/ Parryware/ Hindware/ Cera, SS foldable with 60 cm long with 04 Nos lower hanger hooks complete all as specified and as directed

S & F 15mm bore Bib taps, fancy type of Make: Jaquar, Cat No : QQT 7037 (Queen) or equivalent in Prayag/ Cera/ Parryware/ Hindware, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S & F 15 mm bore fancy type, chromium plated angle valves of Make: Jaquar, Cat No : QQT 7053 or equivalent in Prayag/ Cera/ Parryware/ Hindware with wall flange for iron pipe or for unions and fixed complete all as specified and as directed.

S & F chromium plated 150 x 150mm rain shower rose with shower arm 250 mm long connected to 15 mm bore steel pipe or union complete all as specified and as directed. Make : Jaquar, Cat No : OHS-CHR-1605 or equivalent in Prayag/ Jhonson / Hindware/ Cera/ Parryware.

S & F CP wall mixer telephonic type for mixing hot & cold water , screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and as directed. Make for Hand Shower : Jaquar, Cat/Model No : HSH 1721, Make for tap : Jaquar,Cat No : QQT 7281 or equivalent in Prayag/ Cera/ Parryware/ Hindware

S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F rotational moulded polythene water storage tanks, 1000 Ltr capacity, triple layered, cylindrical, vertical with closed top, hoisted and fixed in position including 20 mm dia ball brass valves, high pressured with polythene float and fly nut complete, screwed for iron pipe all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5 m depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes etc n.exc 1.5m in depth and getting out in hard/dense soil all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick with any excavated soil all as specified and as directed.

Removing excavated material (soil) to a distance exc 50m but n.exc 1.5 Km and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and as directed.

M & L for Salt Glazed Stone Ware (SGSW) drain pipes 150mm dia (internal dia) laid in trenches and jointed in cement mortar complete all as specified and as directed.

M & L for providing PCC (1:3:6) type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore all as specified and directed.

M & L for providing precast RCC cover slab cement concrete (1:2:4), type B-1, (using 20mm graded stone aggregate) as in slabs with plain faces including setting in CM (1:4) complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cu. m, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm and getting out in hard/ dense soil all as specified and as directed.

M & L for providing cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, boundary pillars and posts etc., complete all as specified and as directed.

S & F for rolled mild steel work as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections etc., conforming to Fe-410-W (Gde E 250 Quality-A) complete all as specified and as directed.

S & F rolled mild steel work as in Stairs (framed) including stringers, treades, landing, balusters, hand rails and in rafter, purlins etc., including cleats, brackets, etc., conforming to Fe-410-W (Gde E 250 Quality-A) complete all as specified and as directed.

S & F 3mm thick solid embossed pattern polycarbonate sheet of any colour and shape as approved by GE as in roof /wall cladding fixed with self tapping screw and joints of polycarbonate sheet shall be sealed with silicone etc required for fixing all as per manufacturer's instructions and directed.

M & L for preparation of new surface of steel surfaces and applying two coats of synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified and as directed.

S & F rotational moulded polythene water storage tanks, triple layered 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position with and including 20mm dia PVC float valveand complete with and including 20mm dia PVC float valve complete all as specified and as directed.

Disconnecting existing water tanks, setting aside (or lowering if required), cleaning and re-fixing on another position, reconnecting of size exc 500 ltr but n.exc 1000 ltr complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store all as specified and as directed.

Description all as per Item No 66 above but 20 mm bore complete all as specified and as directed.

S & F 15 mm bore steel water tubes medium grade with all all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Description all as per Item No 67 above but 20 mm bore complete all as specified and as directed.

Description all as per Item No 67 above but 25 mm bore complete all as specified and as directed.

Fixing only 15 mm bore old steel tubing and connections in new or old position ( foxed to walls, ceiling or laid in floors) complete all as specified and as directed.

Fixing only 20 mm bore old steel tubing and connections in new or old position ( foxed to walls, ceiling or laid in floors) complete all as specified and as directed.

M & L for providing 75mm thick plain cement concrete (1:3:6) type C-2) (using 40mm graded stone aggregates) as in subbase complete all as specified and directed.

S & F factory made machine pressed chequered cement concrete coloured tiles of size 300mm x 300mm x 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, laid over and incluidng 20 mm thick screed bed in CM (1 :4) complete all as specified and as directed.

E/M PORTION M & L for concealed point wiring with two single core 1.5 Sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 Sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan etc. point controlled by one switch 5/6 Amps. Make of cable : Havells/Polycab/Finolex.

Description all as per Item No 75 above but One switch socket outlet point 5/6 Amps on independent board complete all as specified and as directed.

Description all as per Item No 75 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Note for Item Nos 74 to 76:- (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for surface sub-main wiring alongwith earth wire of size (4 x 10.0) Sqmm + (2 x 10.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC casing-caping (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc., complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid casing-caping (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for surface sub-main wiring alongwith earth wire of size (2 x 6.0) Sqmm + (1 x 6.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC casing-caping (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note: (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid casing-caping (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for concealed sub-main wiring alongwith earth wire of size (4 x 4.0) Sqmm + (2 x 4.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note: (i) 04 runs of PVC wire, 02 runs of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061 or techno-commercially equivalent Legrand/Anchor Roma/Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells),Cat No : ACVSXXW161 or techno-commercially equivalent Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKSWW063 or techno-commercially equivalent Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells),Cat No : ACVKCWW163 or techno-commercially equivalent Legrand/Anchor Roma/Polycab Note for Item Nos 80 to 83 : (i) Design /Drawing /Technical catalogue /specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make /Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

S & F concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX01/02 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F concealing modular metal flush box suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV01/02 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 3 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 4 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV04 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab

S & F modular cover plate suitable for fixing switches/sockets of 6 modules all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note for Item Nos 84 to 91 : (i) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S & F wall / surface mounted LED light fitting 10 W or next higher rating (2 FT), CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LT510 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F wall / surface mounted LED light fitting 14 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size incl flexible hose complete all as specified and as directed. Make : Luker, Cat No : LWL114-2 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F LED square shape (2' x 2') slim ceiling light fitting 40 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size all as specified and as directed. Make :Luker, Cat No : LNPSRS40 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F LED square shape (2' x 2') slim ceiling RECESS light fitting 40 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size all as specified and as directed. Make :Luker, Cat No : LNS40 or techno-commercially equivalent in Philips /Jaquar /Havells.

S & F wall / surface panel LED DOWNLIGHT fitting 12 W or next higher rating, CRI > 80, CT=3000 K (Warm White), integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LIPR12 or techno-commercially equivalent in Philips /Jaquar/ Havells.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of Exhaust fan, Metal body with connected accessories 300 mm sweep, 900 RPM or more, Air Delivery not less than 1275 CMH, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Turbo Force SP or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

Supply, Fix, installing and testing Vertical type storage instant electric water heater (Geysers) of 3 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 3 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including connected accessories and 2/4 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed. Make: Havells, Cat No: GHWAOBPWH003, Model-Opal EC or techno-commercially equivalent in V Guard/ Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rates.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 A, C Series with Breaking capacity 10KA incl making electric connections complete all as specified and as directed. Make: L&T, Cat No : DBMPS120SD or techno-commercially equivalent in Legrand/ABB.

S & F MCB, DB, TPN, 8 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface incl making electric connections complete all as specified and as directed. Make : L & T, Cat No : DBTPN008DD or techno-commercially equivalent in ABB /Legrand.

S & F MCB, DB, TPN, 6 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface incl making electric connections complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in ABB/ Legrand

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary electric connection all as specified and directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/ABB.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary electric connection all as specified and directed. Make: L&T, Cat No: DBSPN08DD or techno-commercially equivalent in Legrand/ABB.

S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary electric connection all as specified and directed. Make: L&T, Cat No: DBSPN04DD or techno-commercially equivalent in Legrand/ABB.

S & F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU10ST0403C or techno-commercially equivalent in ABB/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make :L & T, Cat No : AU10ST0633C or techno-commercially equivalent in ABB/ Legrand

S & F MCB, TPN, 15KA, 415V, "C" curve, 125 A, ISI marked complete all as specified and as directed. Make :L & T, Cat No : AU15S41253C or techno-commercially equivalent in ABB/ Legrand.

S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed. Make : L&T, Cat No: AU10SS0323C or techno-commercially equivalent in Legrand /ABB /Siemens.

S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No : AU10S10323C or techno-commercially equivalent in Legrand/ABB.

S & F energy saving high power LED building security light of 25W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with and incl suitable size GI bracket made up of GI pipe and fitted with clamps, nuts, bolts etc complete all as specified & as directed. Make: Havells, Cat No: ENDURAPEARLSL25 WLED757SASYTOPCMP or techno-commercially equivalent in Jaquar/Philips

S & F LED Garden light fitting 15W, Ingress protection not less than IP 65, Impact resistance not less than IK 07, CCT 5700K, CRI > 70, Inbuilt SPD > 4kV, Symmetrical light distribution, Isolated electronic LED driver with fixing accessories all internally prewired and connecting up with twin/three core flixible cable of suitable size complete, including light grade GI Pipe (ISI Marked) of 50mm dia of length 1 Meter for pole, inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint incl preparation of surfaces all as specified and directed. Make of light fitting : Havells, Cat No : CORALPT15WLED830PSYMTOPC or techno-commercially equivalent in Philips/Luker. Make of GI pipe : TATA /Jindal /Prakash

S & F loop in- loop out fuse junction box of internal dimension 140 x 140 x 95 mm or higher size made out of FRP sheet with weather proof canopy and locking screw fitted with and including 10KA breaking capacity, SP MCB 6A, C Series - 1 No comprising of 20 Amps rated 4 way connectors for 3 phase and neutral incoming /out going, mounted in the box, fixing on steel tubular/rail poles etc. including suitable clamps, cable glands, lugs and GI nut and bolts etc. complete all as specified and directed. Make: Sintex, Cat No : GSJB-1414 or techno-commercially equivalent in Hensel/OBO. Note for Item Nos 93 to 113 : Design /Drawing /Technical catalogue /specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make /Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

Supply, install, commissioning & testing of Single Phase, Transformer based Online UPS system of capacity 10.0 KVA with in-built isolation transformer, indoor compact type complete with battery system & battery enclosure suitable for minimum 01 hour back-up & comprising of the following features all as specified & as directed :

(a) DSP technology with IGBT based inverter. (b) Inbuilt Over Voltage Cut-Off Device with Surge Protection. (c) Smart LCD display for real-time information. (d) Constant voltage constant frequency operation without battery. (e) EMI/RFI Noise filter. (f) Hot Stand-by & Cold start feature. (g) Built-in maintenance by-pass & static by-pass switches. (h) Inbuilt charger of 20 A. (j) Parallel redundancy & battery reverse protection. (k) Configurable Output Voltage Settings. (l) Over temperature indication & protection. (m) Generator compatible.

Brief technical specifications of the Transformer based Online UPS system are as follows : MODEL : (a) Type & Capacity - Single Phase, 10.0 KVA/8.0 KW. (b) DC voltage system - Default : 192 VDC, Adjustable : 216 VDC. (c) Phase - Single Phase with Ground. INPUT : (d) Nominal voltage - 208/220/230 VAC. (e) Input voltage range - 165 ~ 285 VAC. (f) Frequency range - 40 to 55 Hz. OUTPUT : (g) Output voltage - 208/220/230 VAC. (h) Freq range Battery mode - 50 Hz + 0.1 Hz. (j) AC Voltage Regulation - + 1% (Battery Mode).

TRANSFER TIME : (k) AC to Battery mode - 0 ms. (l) Inverter to by-pass mode - 0 ms. (m) By-pass to Inverter mode - <5 ms. (n) Waveform - Pure Sinewave. EFFICIENCY : (o) Overall efficiency (AC mode) - 87%. (p) Efficiency (Battery mode) - 91%. BATTERY & CHARGER : (q) Battery type/No/Make - 12 V, 65 AH/16 Nos/Okaya or Exide for minimum 1 Hour Back-up (r) Charging current - 2/4/8 A, Default : 8A. BATTERY ENCLOSURE : Battery enclosure shall be MS Powder Coated. INDICATORS : (s) LCD Display - Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode & Fault indicators. (t) Alarms - Battery Mode, Low Battery, Overload, Fault.

Make/Model : i-MAXX Transformer Based Online UPS of make MICROTEK or techno-commercially equivalent of EMERSON/APC. Notes for Item No 115 : (i) Design / drawing / BOM / technical specifications of the complete On-line UPS System incl battery enclosure showing the dimensions is to be obtained from OEM / Auth Channel Partner / Supplier & is to be got approved from Engr-in-charge & GE before placing final order. (ii) Techno-commercial comparative analysis is also to be submitted & got approved from Engr-In-Charge & GE whereever techno-commercial equivalency of the product is concerned w.r.t. given Cat/Part/Model/Make ref. (iii) The cost of periodical/routine servicing/maintenance including minor repairs/replacement of spare parts (if required) including periodical checking of the complete On-line UPS System for the complete defect liability period (2 Years from certified date of completion of work) from the authorized service dealer/rep as & when required/due is deemed to be included in the unit quoted rates. (iv) The complete installation, commissioning & testing of the On-line UPS System is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. (v) Anything missed out in the technical specifications but technically required for efficient working of the On-line UPS System is deemed to be included in the quoted rates. (vi) Necessary electric connections/fixing arrangements shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates.

S & F DP (2-Way) enclosure, IP-30 for independent mounting of MCB change-over switch fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No DBENC002SD or techno-commercially equivalent of Legrand/Siemens

S & F MCB Double Pole, two way with centre-off changeover switch suitable for 400 V AC of rating 63 A complete all as specified and as directed. Make : L& T, Cat No AUC00206300 or techno-commercially equivalent of Legrand /Siemens. Note for Item Nos 116 & 117 : Makes of MCB DP Enclosure & MCB DP Change-over switch shall be the same.

M & L for surface sub-main wiring alongwith earth wire of size (2 x 10.0) Sqmm + (1 x 10.0) Sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC casing-caping (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid casing-caping (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for 25mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified & as directed.

M & L for 40mm (external dia) rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, cable ties etc. for laying/passing of cable etc. complete all as specified & as directed.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, unarmoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3 Core 6 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed. Make: Havells/Finolex/Polycab

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, unarmoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3.5 Core 50 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed. Make: Havells/Finolex/Polycab

HRML CONSTRUCTIONS

K.AYYAPPAN