Provn of kitchen cabinet and allied accessories to Defi Qtrs at Manoj Enclave, provn of bathroom and toilet near MT park (bldg. No P-15) of Grenadiers under GE (East) Ferozepur Cantt

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cable and getting out etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil all as specified and directed by Engr in charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

M&L for RCC nominal mix 1:2:4 type B1 using 20mm grade aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC nominal mix 1:2:4 type B1 using 20mm grade aggregate in columns, pillars, piers, posts and struts complete all as specified and directed

M&L for RCC nominal mix 1:2:4 type B1 using 20mm grade aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for RCC nominal mix 1:2:4 type B1 using 20mm grade aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and directed

M&L for formwork to edges of roof slabs n exc 20cm wide for rough finished surfaces complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed

M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including Preparation of new plastered surfaces wall and applying two coats of white wash complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc including Preparation of new plastered surfaces and applying two coats of white wash on ceiling surface complete all as specified & directred.

M&L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in sub base in floors complete all as specified and directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and as directed.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded & including 6 mm mild steel guard bars and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded,grills/guard bars shouldered with steel ventilator frames and with one shop coat of zinc chromate primer complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 150mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F Pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled shutters, any number of panels, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and all as specified and dirtected.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

S&F for 10ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F for 15mm bore stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified and directed.

S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.

S&F for CP Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F for 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F for Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve complete all as specified and as directed

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints complete all as specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and directed.

S&F for vitreous China Urinal, Half stall type, white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F CP tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed all as specified and directed.

S&F for 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F Soap dish of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms), complete all as specified and directed.

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR)with access door bends any radius, complete all as specified and directed.

S&F 110 mm dia PVC (SWR)with access door bends any radius, complete all as specified and directed

M&L for 75mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in plinth protections complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil all as specified and directed by Engr in charge.

Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, coaping, plinth courses, benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and directed

M&L for cement concrete 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and necessary formwork complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 in concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

M&L for 150mm dia bore of reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed

M&L for 100mm thick cement concrete type B- 2, 1:2:4 using 40mm graded aggregate in sub bases in floors, hardstanding complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment used, excluding laying of sand cushioning complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M&L sand filling under floors or in foundations, for cable cushioning to underground cable protection including watering and consolidation complete all as specified and as directed.

Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazeded ceramic coloured (colour & shade as approved) tile 450x300x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

S & F factory made PVC cup boards/ Shelf / Partition of required size consisting of panel of 16-18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3 edges in size 16mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement, Magnet catcher etc. complete all as specified and directed.

Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw, complete all as specified and directed.

S&F alluminium anodised handles 100 mm long fixed to Cupboard etc complete all as specified and directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including new PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following : (a) One light/fan/bldg security light point controlled by one single pole one way switch.

(b) One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size, complete all as specified and directed.

All as per item No. 78 here-in-before but one 15 Amps socket outlet power point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable. complete all as specified and directed.

S&F 5 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.

S&F socket outlet flush type 2-in-1, multipupose, 3 pin 5 Amp and 2 pin 5 Amp complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

Supply and fixing LED tube light fitting 1 x 20 Watt, (4 Feet), 2000 lumens, 6500K, surge protection 3.5 KV energy efficient 220V, batten type fixed on wall/ ceiling etc. including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fix LED tube light along with fixture, 1x 10 watt, (2 Feet) energy efficient 220V batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN, 63 Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "C" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning, complete all as specified and directed.

Supply & Fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB of 'C' series complete all as specified and directed by Engr in Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

S&F exhaust fan heavy duty with louvers complete of sweep size 300 mm, single phase with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076, complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core, complete all as specified and directed.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed.

M&L for cutting of existing DI tubing 80/100 mm dia for making new conncetion, inserting suitable size Nipple including excavation, returning filling complete and all as directed and specified.

Supply and laying GI tubing medium grade galvanised of size 40mm bore laid on floor/ ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 40mm bore complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore, complete all as specified and directed.

Material and labour for construction of brick masonry valve pit of size 600 x 600 x 1000mm (internal dimension) with mild steel sheet cover 6mm thick and frame of angle iron of size 40mm x 40mm x 6mm duly painted with two coats of synthetic enamel paint over one coat of red oxide primer including excavation and earth work,150mm thick PCC (1:4:8) type D-2 as in foundation, brick work in cement mortar (1:6), locking arrangement, and all inner size of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete all as specified and directed.

SATIJA BUILDERS (BID ID -3506315)

M/s Bansi Lal (BID ID -3506057)