8503 WELCOME MAINTENANCE FOR OFFRS MD ACCN AND CERTAIN B/R REPAIRS IN THE AFMC AREA UNDER GE (CENTRAL) PUNE

Amount

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc 1.50 Sqm but not exc 4.00 Sqm & removing from site all as directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area not exc 1.50 Sqm & removing from site all as directed.

Taking down shutter of any description and removing frome site exc 1.00 Sqm & not exc. 2.00 Sqm each leaf & removing from site all as directed.

S & F 30mm thick Flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides& removing from site all as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete.

S & F Factory made solid panel door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site complete.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/Mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

S & F 100mm long mild steel but hinges medium weight colld rolled complete all as specified and as directed.

S & F 150 mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm long Extruded aluminium powder coated handles, fabricated type complete all as specified and as directed.

S & F 300mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminim alloy complete all as specified and as directed..

Supply and fix in repairs 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply & fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix repairs decorative type curtain rod , stainless steel, 25 mm dia with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and and providing and fixing new ones complete all as specified and as directed.

S & F 3.00mm thick plain / frosted sheet glass ordinary quality & glazing with oil putty area in squares not exc. 0.50 Sqm in each pane complete all as specified and as directed. .

M & L for preparation of new wooden surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifiedand as directed.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.80mm thick, cut to shape & size of shelves including dismantling existing board complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 18mm thick UV coated exterior grade MDF board duly edge banded with 0.80mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and directed.

S & F 75mm aluminium anodised Hasp and staple safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 100mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix 100mm long Extruded aluminium powder coated handles, fabricated type., anodised complete all as specified and directed.

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as directed.

M & L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and Smooth without extra cement complete all as specified and directed.

M & L Rendering 15mm thick IN cm 1:4 on fair faces of brick work or concrete surfaces fi=nished the surface even and smooth without extra cement complete all as specified and directed.

M & L rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling finished even & Smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistent primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a alkali resistent primer complete all as specified and directed.

Material and labour for Joint free Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick, Matt Finished (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of existing floor tiling including cement mortar bedding (but not backing), removing debris out side of defence land complete all as specified and directed .

M & L for colored glazed ceramic tiles / Matt Finish 300mm x 450mm x 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces including dismantling of existing hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land complete all as specified and directed

Material and labour Virified Ceramic tiles (any shade) of size 600mm x 600mm x 8 to 9mm thick (square/ rectangular) polished as in floor set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling including cement mortar bedding (but not backing), removing debris out side of defence land complete all as specified and directed.

All as per item No 40 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces including dismantling of existing floor tiling including cement mortar bedding (but not backing), removing debris out side of defence land all as specified and as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface including dismantling of existing stone slab in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

M & L 20 to 25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified and directed.

Drilling holes for bolts, pipes, etc not exc 25mm dia in granite or trape stone for gas connection pipe all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

S & F in repairs Vitreous china Wash Hand Basin Counter Top (over or under counter) Oval shape of Size 560mm x 470mm excluding pillar taps & waste pipe but including Waste coupling chromium plated complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock cost copper alloy chromium plated , fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S &F in repairs chromium plated Health faucet spray with 1.50 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps two way type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repairs 15mm bore dia swan neck pillar taps of cast copper with capstan head chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe and fixed complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450mm complete all as specified and directed.

S & F Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix in repairs brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Cutting chases, pinning in, and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc and including making good to facings where required cutting not exc 10 cm girth complete all as specified and directed.

Supply, Fixing and laying 15mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

Supply, Fixing and laying 15mm bore dia UPVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or laid in floors etc including taking down steel / CPVC / UPVC tubing complete all as specified and directed..

Supply, Fixing and laying 20mm bore dia UPVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or laid in floors etc, any type of pipe including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

Supply and fix 75mm bore dia out let PVC (SWR) floor trap / Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F in repair 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110mm bore dia, PVC (SWR) bends o fany radius complete all as specified and directed.

S & F 75mm bore dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F 100mm bore dia (PVC (SWR) vent cowl complete all as specified and directed.

S & F sinks made of stainless steel kitchen sink without drainage board made of stainless steel 1.00mm thick with plug washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm, bowl size 410 mm x 330mmx 16 mm complete all as specified and directed.

S & F 500 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mm x 60mm) using hot dipped galvanised steel section, exposed surface with precoated capping main Tee of size 24 x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200mm center to center in both directions using 2.0mm thick prestraightened GI wire on main runners including making niches for fans / light including dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for preperation of old decorated or unplastered surface of walls including all cornices (plastered or unplastered) and applying one coat of white wash all as specified anda directed.

M & L for preperation of old decorated or unplastered surface of ceiling including cornices (plastered or unplastered) and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old distempered surfaces of wall including washing, rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (White or tinted ) complete all as specified and directed.

M & L for preparation of old decorative surfaces of ceiling including cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper comoplete all as specified and directed.

Complete removal of existing treatment of walls and applying two coats of oil bound distemper over one coat of alkali resistance primer over & including thin layer coat of wall care putty complete all as specified and as directed.

Complete removal of existing treatment of walls and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed.

M & L Preparation of old decorated surfaces of walls and applying one coat of cement base paint (white or tinted) all as specified and directed.

M & L for preparation of old decorative surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted steel surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thick (below or above ground level) complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base / flooring / paving complete all as specified and directed.

M & L for plain cement concrete 1:3:6, Type C-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete for manholes & drains complete all as specified and directed.

M &L for 75mm thick PCC 1:3:6, type B-2 using 20mm graded aggregate as in plinth protection / hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for precast coloured, chequered cement concrete tiles, Perforated / glossy finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry as in floor laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed..

S & F in repair (4 pipes of 3.50 feet) wall mounted stand consisting of four anodised aluminum pipes each of outer dia 22mm and inner dia 19.80mm mounted on anodised aluminum angle of size 40mm x 40mm x 3mm, weight of stand not less than 1.60 Kg complete all specified and directed by Engr-In-Charge.

S & F in repair (4 pipes of 4 feet) wall mounted stand consisting of four anodised aluminum pipes each of outer dia 22mm and inner dia 19.80mm mounted on anodised aluminum angle of size 40mm x 40mm x 3mm, weight of stand not less than 1.60 Kg complete all specified and directed by Engr-In-Charge.

S & F in repair 5 feet pully operated cloth drying system consist of aluminum pipe outer dia 22mm and inner dia 19.80mm pully made up of dry in with rope guide mounted on channel pair of length 600mm (distance between two pipes and adujstabe) including locking system to hide rope not, channel to be mounted or fixed with self tapping screws provided in it, rope shall be polyster bradded undyed nylon of 4mm dia fixing to ceiling complete all specified and directed by Engr-In-Charge.

Pratap enterprises (BID ID -3055351)

M/S AKASH ENTERPRISES (BID ID -3057691)

Ms. S.K. ASSOCIATES (BID ID -3055993)

M/s.BAJRANG CONSTRUCTION (BID ID -3057834)

M/S RAJIV BUILDERS (BID ID -3057499)

Parhar Enterprise (BID ID -3065653)