8142/2022-23/E8 PROVN OF TOILET AND ALLIED INFRASTRUCTURE IN CERTAIN UNIT AND SPECIAL REPAIRS TO FLOOR, TILING AND DOOR OPENING TO BLDG NO T-208 AT CERTAIN UNIT UNDER GE 860 EWS

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for foundation etc and getting out in hard/dense soil complete all as specified and directed.

Excavation over area n.exc 1.50m deep and getting out in any type of soil complete all as specified and directed.

Excavation over area exc 1.50 m but n. exc 3.0 m deep and getting out in any type of soil complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base 75mm thick complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or poygonal, rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed.

M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel TMT bars 5mm to 10mm dia as in stirrups over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel round bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as specified and directed.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted,built in cement mortar 1:6 complete all as specified.

M & L walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted,laid dry complete all as specified.

M & L Precast cement concrete block masonry type C-1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.

M&L rendering in cement mortar 1:6, 10mm thick on fair face on concrete surface and finishing the surface even and smooth (without using extra cement) complete all as spd & directed.

M&L rendering in cement mortar 1:4, 15mm thick on fair face on concrete surface and finishing the surface even and fair (without using extra cement) complete all as spd & directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

S&F plain 2nd class hardwood 35mm thich framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 100 mm long butt hinges medium weight , cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm long butt hinges medium weight , cold rolled mild steel and fixed complete all as specified and directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 125mm complete all as specified and directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm complete all as specified and directed.

S&F 200 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 3 mm thick glass sheet ordinary quality and glazing with oil putty fixed with wodden beads n.exc 0.5 Sqm in each pane including hacking out old broken glases of any size complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate) 75 mm thick as sub base complete all as specified and directed.

M&L for non-skid Ceramic tiles (colour or white as directed) 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n. exc. 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including screed bed or bedding layer mortar in cement mortar 1:6, 15mm thick for laying floor finishes complete all as apecified and directed by Engr-in-Charge.

M&L for Glazed colured ceramic tiles of size 300x450x7mm laid on vertical surface such as dado/skirting over and including 10mm thick backing coat in cement mortar 1:4 , set jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and as directed

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F GI Tubing Medium Grade with all fittings and fixed complete to walls and ceiling or laid in floor etc, 15 mm dia complete all as specified and directed.

S&F GI Tubing Medium Grade with all fittings and fixed complete to walls and ceiling or laid in floor etc, 20 mm dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

S&F stop valves 15 mm bore cast copper alloy screwed down, high pressure with crutch ot butterfly handle screwed both ends for iron pipe or for unions, all as specified and directed.

S&F Viterous China wash basin, white, flat back, size 630X450mm incl waste coupling CP 32mm dia brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.

S&F 40mm waste coupling of PTMT (half or full threaded) minimum weight 45 gms and fixed complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.

S&F Vitreous china Urinal bowl, flat back,size of 465x355x 265mm white minium with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securign urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe) and incl waste pipe with discharge arrangement complete all as specified.

S&F Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed.

S&F for PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F 15mm bore pillar tap cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with threaded closed top) hoisted and fixed in position including 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified complete all as specified and directed by Engr-in-Charge.

M&L for broken stone or boulder hard core of gauge not exc 63 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete.

M&L for 75mm thick cement concrete 1:3:6 type C - 1, using 20mm graded stone aggregate as in plinth protection and finishing the surface even and smooth with using extra cement complete all as specified and as directed..

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of Red Oxide primaer complete all as specified and as directed

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directe by the Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified all directed by the Engr-in-Charge.

M&L for screed bed or bedding layers of mortars 15 mm thick with water proofing compound as per manufacturer's instructions in cement mortar 1:3 laid over concrete surface when concrete is green at roof complete all as specified and as directed. Note : WPC shall be mearsured and paid separetely.

Supply only Integral Water proofing compound complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber rings joints, laid in trench, or in floors or fixed as vent pipe etc complete all as specifed and as directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specifed and as directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregates) as in foundation of manholes and filling around the manholes complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.

M&L for Precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in manhole's cover slab etc placed in position including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed.

S&F 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing PVC (SWR )bends (any radius) 150mm complete all as specified and directed.

Supply and fixing PVC (SWR) branch piece, single (single Y) equal or unequal 150mm bore complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specifed and as directed.

Taking down chowkats with shutters without taking off shutter from frame area exc 1.5 but not exc 4.00 sqm complete all as specified.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm complete all as specified and directed.

S&F 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Mild steel sliding door bolt, stove enamelled black with Min 6 Nos of bolt & nuts , four on bolt plate and two on staple plate of size 300 mm complete all as specified and directed by Engr-in-charge.

S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (Un-reinforced) in ground floor and paving etc n.exc 15 cm thick below or above GL complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge.

S&F grid false cealing GI system powder coated prelude (main runner sec 32x24x0.30x3600mm), cross tee 25x24x0.30x1200mm, walll angle 24x24x0.40x3000mm and including providing and fixing 4mm thick non asbestor cement fiber designer of size 595x595 mm fixed in cealing frame work), complete all as specified and directed by Engr-in-Charge

M&L for 9mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame works on walls complete all as specified and directed by Engr in Charge

Dismantling of timber scantling/fillets, rails, posts, rafters, purlings, etc in framed work under 40 sq cm in any position complete all as specified and directed by Engr in Charge

M&L for 2nd class hard wood Plain fillets exc 13 Sqcm but n exc 25 Sqcm in square, rectangular or triangular in section, clean sawn, secured with nails etc complete all as specified and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M&L for cement concrete 25 mm thick type B-0 1:2:4 (12.50 mm graded crushed stone aggregate) as in levelling course for surfaces complete all as specified and as directed

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) 100 mm thick as in sub base complete all as specified and as directed

M&L for 20mm thick sand cushoning for laying of interlocking tiles complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade complete all as specified and as directed.

S&F rubber moulded chequrred cement concrete colour tiles 30 cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment over 15mm screed bed in cement mortar 1:4 complete all as specified and as directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F for 0.50 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L point wiring complete for one light / bell / buzzer / exhaust fan point controlled by one no, 1-way switch.with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl 2nd class hard wood board of suitable size and shape flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of 2nd class hard wood board with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per srl item no. 100 here-in-before but one socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item no. 100 here-in-before but one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per srl item no.100 here-in-before but with 2.5 sq mm FRLS copper wire and with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. Note: The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit.

S&F Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

Supply and fixing switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge..

Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for and including S & F 9 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x 9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S&F DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F MCB, C Curve type, 10 kA, 35 to 60 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 5 to 30 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .

Taking out of old un serviceable under ground service connection cable of any size complete all as specified and directed by Engr-in-Charge.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

M & L sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I.

Supply and fixing in replacement tube medium grade galvanized with all fitting and fixed complete to walls/ poles/ ceiling or laid in floor of size 40 mm bore for the protection of UG cables complete all as specified and as directed.

Supply and fixing tube medium grade galvanized with all fitting and fixed complete to walls/ poles/ ceiling or laid in floor of size 40 mm bore for the protection of UG cables complete all as specified and as directed.

M/S TRADE LINK

M/s Koul & Sons

PARIDHI CONSTRUCTION

M/S Behl Sons