SPECIAL REPAIRS/UPGRADATION/ADDN/ALTN OF SELECTED GOVT MD ACCN AT NASIRABAD

Amount

Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick (size not less than 550mm x 550mm) with and including 15mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed. Note:- All exposed edges of kota stone flooring shall be finished as half round/bull nosed.

M&L for kota stone slab 20-25mm thick in riser or steps, cill single piece, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing where directed complete fixed over and including 10mm screed plaster in CM (1:4) complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in window cill in single piece, dado and pillar etc set and jointed in neat cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick cement mortar 1:6, complete including necessary bull nosing of steps complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including screed bed 15mm in CM (1:6) complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15cm in CM (1:6) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed.

Demolition of lime concrete of any description and in any position complete all as specified and directed.

M&L for Cement concrete (1:5:10) in foundations, filling of sunken and mass-concrete etc complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 50mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 2 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding joints etc in walls ceilings stanchions beams etc including all laps cutting and waste complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Glazed ceramic coloured tiles, area exceeding 0.11 sqm but not exceeding 0.18 sqm, 6 to 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work, concert surfaces or stone masonry surfaces, finished even and fair complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper over 1.00mm thick wall care putty of approved make on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on fair faces of stone masonry surfaces, finished even and fair complete all as specified and directed.

M&L for rough cast plaster over 15mm thick in cement mortar (1:4), on stone/brick masonry wall surfaces, complete all as specified and directed.

M&L for 10mm thick rendering on cement concrete, isolated width, chajjas and patta, etc in (CM 1:3) including necessary doubing out etc finished even and smooth (without using cement) complete all as specified & directed.

M&L for rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces, in ceilings, chajjas, isolated width etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:3 on fair faces of brick work, concrete surfaces as in sunken / roof treatment finished even and smooth without using extra cement with and incudingl applying two coats of acrylic polymer treatment as per manufacturer instructions (Make: CICO (Tape Crete or equivalent) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over over 1.00mm thick wall care putty of approved make on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying 2 coats of white wash complete all as specified and directed..

M&L for prepration of old ceiling surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls applying two coats of cement base paint, white or tinted complete all as specified and directed.

Racking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to course built in cement or cement lime mortar complete all as specified and directed.

M&L for raised pointing in CM (1:4) to random or polygonal rubble, uncoursed or brought up to course complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete alll as specified and directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick wall nut colour moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for 100mm size stainless steel butt hinge complete all as specified and directed.

M&L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and treating with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F hold fast of flat iron conforming to Fe-290 (Gde-E-165) including preparing the surfaces and treating with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with 10mm thick 1st class Hardwood lipping duly polished complete all as specified and directed.

S&F IInd Class hardwood 35mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F IInd Class Hard wod small fittings such as brackets of any type, latch and hinges blocks , shaped door and window stops and the like, incl all necessary labours; article n.exc 200cu.cm each complete all as specified and directed.

S&F MS butt hinge 50mm medium weight cold rolled incl necessary welding etc complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F IInd class hardwood chowkats and frames in cupboard plain fillets, square,rectangular or triangular in section (exc 13 sq.cm n. exc 25 sq.cm) clean sawn, with glue, pinned at joints and fixed with screw complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinate and cup board etc work complete all as specified and directed.

S&F brass body magnetic ball catches with 8mm dia striking plate including letting in complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and directed.

S&F 6mm thick external teak wood lipping 18/19mm and fixed with nails complete all as specified and directed.

S&F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for 100mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F for 125mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 250mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for 100mm Mild steel butt hinge complete all as specified and directed.

S&F single action spring hinge, 125mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed.

S&F in repairs factory made press Steel window/ ventilator glazed & gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.60mm thick MS hollow section complete including providing necessary cooler arrangement in window & guard bars all as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for 3mm thick sheet glass plain / pin headed, ordinary quality and glazing with oil putty in square nexc 0.50 Sqm in each pane complete all as specified and directed.

M&L for two coats of synthetic enamel paint over coat of pink primer on wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F 50mm bore GI pipe medium grade as fixed in sleeve/spout including making necessary hole in walls complete all as specified and directed.

S&F in repairs 25mm mild steel chromium plated curtain rod powder coated finished complete all as specified and directed.

S&F decorative type curtain rod bracket with cap of mild steel powder coated suitable for 25mm dia rod complete all as specified and directed.

Taking down existing water proofing treatment of any description including PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment including make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.

M&L 20mm thick Granite (of any ttpe) work (table rubbed and polished) in cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary bull nosing to edging fixed over 15 mm thick Screed in CM (1:4) complete all as specified and directed.

M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

S&F in repairs Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed

M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm having thermal insulation with white mineral/gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method.

BOQ Serial Item No.72.10 (contd/-):- (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. (f) Topping will be done with precast machine pressed 20-22mm thick PCC tiles (using grey cement) of size 250 x 250 mm or 300 x 300mm, conforming to IS-1237 (hydraulically pressed), laid over 15mm thick cement mortar screed in CM (1:4), set & jointed in neat cement. Joints of tiles shall be 2-3mm wide and grouted with chemical ‘Tile Grout’ of M/s Asian Paints or equivalent as approved by GE. NOTE:- (i) Work of water proofing treatment shall be carried out by the authorised applicator of the manufacturer. Necessary documentary evidence in support of the authorised applicator will be submitted toGE before the commencement of water proofing work. (ii) The quoted rates is deemed to include for the cost of scaffolding, T&P, etc required for execution of the work.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in positioncomplete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old steel tubing 25 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 25mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed

S&F in repairs 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repairs 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repairs 15mm bore concealed valve, fancy type cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop valves/angle valve cast copper alloy fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm bore, fancy type bib tap of cast copper alloy screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Soap dish disc (oval) type, mild steel Chromium plated of approximate size 100 x 50 x 10 mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Towel Ring of brass chromium plated fixed with and including Chromium plated brass screws complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs vitreous China wash basin, white, flat back, size 450x300mm with and including CP waste coupling and PVC connections 15mm size with PTMT nuts of length 450mm, 40mm PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs 15mm bore fancy type cast copper alloy chromium plated mixer for mixing hot & cold water with crutch handle of approved quality for WHB complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests with PVC SWR 'P' or 'S' trap complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type dual flush,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long complete all as specified and directed.

S&F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 914mm x 460mm x 203, bowl size:- 405mm x 354mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed.

S&F stainless steel kitchen plate rack made out of 0.63mm thick sheet of size 765 x 920 x 220mm deep of approved pattern & make and weight not less than 8.0 Kg each complete all as specified and directed.

Taking down of PVC rainwater pipes and waste water pipe or gas pipe (any size or pattern) in any position, including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with PVC clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/ fixed to wall with clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S&F PVC 110mm bore (SWR) branch piece, double (double Y) with access door equal or unequal, complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction double (double T) with access door equal or unequal, complete all as specified and directed.

S&F 110/75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

M&L for PVC (SWR) gully trap 150/110mm with grating, setting in PCC and jointing with solvent cement complete all as specified and directed.

M&L for 75mm bore PVC (SWR) floor trap/ Multi trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F aluminium grill, medium grade of mesh size 50mm x 50 mm fixed at outer edge of door/window/ventilator complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for RCC 1:2:4 Type B0 using 12.5mm graded aggregate as in beams, cantilevers, bressummers, parapets, lintels over 1.5m span etc, including formwork complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition of Brick or Stone Masonry built in cement mortar etc complete complete all as specified and directed.

M&L for brickwork with sub-class `B`bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including conduits any type and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only, surface conduit will be used in lieu of concealed PVC conduit) with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour, FRLS as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for:-

One light point/bell point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

One light point controlled by two Nos two way switch.

All as per BOQ Serial item No.121.00 but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed.

S&F sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour, FRLS as earth continuity conductor complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length..

S&F switch piano, flush type 5 amps, single pole, one way 240 volts complete all as specified and directed.

S&F switch piano, flush type 15 amps, single pole, one way 240 volts complete all as specified and directed.

S&F switch piano, flush type, 5 amps, single pole, two way 240 volts complete all as specified and directed.

S&F bell push, piano, flush type 5 Amp complete all as specified and directed.

S&F socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed.

S&F socket out let, 2 in 1, multipurpose 5 pin 5 & 15 Amp flush type complete all as specified and directed.

S&F stepped type (switch type) electronic ceiling fan regulator flush type, AC, 230 volts, complete all as specified and directed. Note: Regulator and switch/socket will be of the same make

S&F ceiling rose, surface type bakelite 65x17.5 mm, three terminals complete all as specified and directed.

S&F Bell ding dong type electric 230 volts AC, single phase, complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED tube light fitting box type in acrylic linear tube (1 x 20watt),230V for single LED tube light including 1 x 20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.

S&F LED mirror Light fitting, 9/10 W, attractive wall/ceiling mounted type with mettalic channel and white reflector, suitable for mirror light fittings with complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S&F LED decorative wall light fixture made up of polycarbonate, suitable up to 1 x 10 watt retrofit LED lamp complete all as specified and directed.

S&F LED light fittings, 1 x 10 W bulk head luminaries with all accessories and including connecting up with three core copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed.

S&F, testing and commisioning energy saving street light luminaire 15 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate cover with individual LED lenses complete all as specified and directed.

S&F street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.

Taking down existing electric meter of any rating & capacity after disconnecting the electric connections, keeping in safe custody and refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc. complete all as specified and directed.

Taking down existing ceiling fan, dismantling blades after disconnecting the electric connections, keeping in safe custody and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan complete all as specified and directed.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.

S&F MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.

S&F MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'B' curve complete all as specified and directed.

S&F MCB TPN, 415 volt, 63 Amp capacity, 10 KA, 'B' curve complete all as specified and directed.

S&F exhaust fan 300 mm sweep, metal body with louver shutter suitable for 230 Volts, Single phase 50 Hz AC supply,connecting with three core flexibale copper cable including making hole for fixing of fan and making good the disturbed surfaces of wall complete all as specified and directed.

S&F ventilating fan 250 mm sweep, PVC body with louver shutter suitable for 230 Volts, Single phase 50 Hz AC supply,connecting with three core flexibale copper cable including making hole for fixing of fan and making good the disturbed surface of wall complete all as specified and directed.

S&F storage type electric water heater single phase 230 volt, stainless steel tank, vertical type of capacity 25 Ltr, BEE star rated including writing MES No with black enemel paint complete all as specified and directed.

S&F inlet outlet PVC reinforced connection pipes 450 mm long with chromium plated washers suitable for hot/cold water as required at site complete all as specified and directed.

S&F LED lamp 9/10 watt complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one single pole 20 Amp MCB SP `B' series for geyser complete all as specified and directed

M&L for TV Socket with and including PVC conduit and suitable co-axial cable wire from TV socket to end point of conduit at out side on wall/roof as per sirte requirement complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 including dismantling of old existing earthing . NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

Deduct schedule of credit (calculation will be done off line) Rs.12,33,268.00

YAGYA AGARWAL CONSTRUCTIONS AND INFRA SOLUTIONS PVT LTD

MADAN MOHAN JAIN sons

BHARATSHAH CONSTRUCTION CO

M/s Prem Associates

M/s Kishan Gopal Agarwal

B.S Constructions

trading engineers

M/s H.S. Mehta Infra Pvt. Ltd.