Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Responsive |
| 2 | Accepted-Technical GOVERNMENT CONTRACTOR VILLAGE PO TEHSIL NURPUR DISTT KANGRA HP | Accepted-Technical Responsive |
| 3 | Accepted-Technical | Accepted-Technical Responsive |
Tender Value
₹35.2 L
EMD Value
₹71,000
Closing Date
25 Feb 2026, 11:00 amClosed
Executive Engineer Dalhousie
Executive Engineer Dalhousie Division HPPWD Dalhousie
SH Providing and laying RS-I and 30mm thick Bituminous concrete and Thermoplastic road marking paint in Km. 5/0 to 6/400 1.400 Km
2026_PWD_129038_1
NoPWD-TA-Tender2025-26 8761-8810 Dated13/02/2026
Open Tender
Civil Works
Percentage
Dalhousie
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,000
₹71,000
Yes
19 Mar 2026
19 Feb 2026
25 Feb 2026
19 Feb 2026
25 Feb 2026
19 Feb 2026
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 kg (zero point two seven five killograme) per sqm on prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 or as per direction of Engineer-In-Charge including carriage of materails with in all leads, lifts and other incidentals. The rate including the octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.
Providing and laying 30 mm (Thirty millimetre) thick bituminous concrete with 100-120 (one hundred-one hundred twenty) TPH batch type hot mix plant producing an average output of 75 (seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at the rate of 5.4 to 5.6 (five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects or as directed by the Engineer-in-Charge includes carrige of materials within all leads and lifts and other incidentals the rate inclusive octori, royality, Malkana, toll tax, sale tax ,GST or other taxes imposed by the Government.
Providing and laying Hot plastic road marking paint of approved manufacture 2.5 mm (two decimal five millimetre) thick with reflectorising glass beeds at the rate 250 (two hundred fifty gram) gram per square metre area, thickness of 2.5 mm (two point five millimetre) is exclusive of surface applied glass beeds as per specification and with strips of 0.10 ( zero decimal one) metre width in centre lines or edge lines of the road as per MORTH specification Clause No.803 or as per directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is inclusive of octroi, royality ,Malkana, toll tax,GST or any other taxes imposed by the Government.
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.78 MB
BOQ_190763.xls
BOQ • 0.28 MB
SBD.pdf
Tender Documents • 3.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .