EEE-III/RZ/TC/2023-24/01.6

Amount

Earthing with GI Earth pipe 4.5longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required.

Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Up to 35 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.up to 35 sq. mm

Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size on wall surface as required. Up to 35 sq,mm (clamped with 1mm thick saddle)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandcushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

S/D of following size of FRLS PVC insulated copper conductor ,Single core cable in the existing surface /recessed steel/PVC conduit as required . 2 x2.5 sq.mm

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd

Supply of XLPE insulated and PVC sheathed Al. Conductor armoured cable of 1.1KV grade conforming to IS 7098 part-1 as required. 2C X 10 sq.mm

Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm(L) x 450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, rewinforcement of cold twisted bars of 12 mm dia -960mm long (approx.) - 8 nos.and reinforcement of cold twisted bar of 8 mm dia - 1400 mm (approx.) - 6 nos. (with 150 mm spacing) as required with positioning of foundation bolts 16 mm dia 600 mm long J type i/c 2 nos template anchor plates of size 225mm X 225mm X 3 mm and providing DWC HDPE pipe for cable entry & exit as required for 3Mtr & 5 Mtr pole

Fabrication, supplying & fixing class B Galvanised single overhang arm bracket made out of 250 mm long galvanized top tube with cap & 250 mm long 32 mm dia galvanized pipe with tightening bolts etc as reqd.

Fabrication, supplying & fixing class B Galvanised double overhang arm bracket made out of 250 mm long galvanized top tube with cap & 250 mm long 32 mm dia galvanized pipe with tightening bolts etc as reqd.

Providing and laying of HDPE PIPE of 40 mm outer dia with PN 4 rating by hand Moling/Manual Method confirming to IS 4984- 1592

Providing and fixing of stainless steel name plate of size 6 : 8 sq inches made of 20 guage sheet including engraved name of area representative duly painted along with SS clamp nut bolt as required.

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification as reqd (a) Total system wattage 60 watt +/- 5 % (b)luminaire efficacy >= 100 lumens/watt (c) power factor >=0.95 (d) Protection IP66

Fabrication, supply & erection of following size flange mounted hot dipgalvanized octagonal pole made from HT steel plate, window with Full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required i/c Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd terminal block suitable for 25 sq mm conductor – 4 nos. & shorting links on DIN channel i/c pdg and fixing DIN channel of suitable length 6 Amp. SPMCB ‘C’ characteristics earth stud cable support clamp suitable for 4 nos. of 4x25 sqmm cable. Logo/name of Manufacturer shall be embossed on the pole Galvanisation as per relevant IS 5.0 Meter height 3 mm thick bottom dia of 130 mm & top dia of 70 mm base plate of size 225 X 225 X 12 mm thick

Supply of XLPE insulated and PVC sheathed Al. Conductor un-armoured cable of 1.1KV grade conforming to IS 7098 part-1 as required. 2C X 6 sq.mm

Providing and fixing name board made of MS Sheet 90x60 cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back othe sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30 embedded in CC block 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approval steel primar, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction Engineer-in-Charge

Naman Enterprises

G D Electricals

KHANNA SALES CORPORATION