Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC Accepted being L-1 | |
| 2 | L2₹10.4 L+₹1.4 L (15.5%)Rejected-AOC HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L2 | Rejected-AOC Not accepted being L-2 | |
| 3 | L3₹11.0 L+₹2.0 L (22.0%)Rejected-AOC | L3 | Rejected-AOC Not accepted being L-3 | |
| 4 | L4₹16.2 L+₹7.2 L (80.3%)Rejected-AOC 403 GH MANSADEVI COMPLEX PANCHKULA 134109 HARYANA | PANCHKULA | HARYANA | 134109 | L4 | Rejected-AOC Not accepted being L-4 |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
12 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PARTAPUR
GE PARTAPUR
VARIOUS REPAIR/ REPLACEMENT OF PIPE LINES WITH CONNECTED ITEMS FOR SASOMA AND BASE CAMP UNDER GE PARTAPUR
2022_MES_551638_1
GE/P-53/2022-23
Open Tender
Civil Works
Item Rate
183 days
GE PARTAPUR
As per tender documents
8 documents required · 8 mandatory
₹500
GE PARTAPUR
₹24,000
Yes
21 Oct 2022
13 Sept 2022
14 Oct 2022
13 Sept 2022
12 Oct 2022
28 Sept 2022
13 Sept 2022 - 17 Sept 2022
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for laying of water pipe lines/taking out pipe lines and getting out in hard/dense soil including forming bottom surface to required level and slope all as specified and as directed.
Returing ,fiiling in including spreading ,leveling ,watering and well ramming in layers not exe. 25 cm thick in soils complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50 m and doepositing where directed at a level not exceeding 1.5 m above the strarting point complete all as specified and as directed.
Taking up / down old DI/GI/PP-R tubing connection including clearing (from trenches) complete as directed by Engr-in-Charge of following size:
20mm bore
25mm bore
40mm bore
50mm bore
Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 20 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. Make : SFMC or equivalent
All as per srl item No 5 but outer dia 25mm. Make : SFMC or equivalent
All as per srl item No 5 but outer dia 40mm. Make : SFMC or equivalent
All as per srl item No 5 but outer dia 50mm. Make : SFMC or equivalent
M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 20mm outer dia 22/19mm thick with chiken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.
M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 25mm outer dia 28/19mm thick with chiken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.
M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 40mm outer dia 28/19mm thick with chiken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.
M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 50mm outer dia 28/19mm thick with chiken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed by Engr-in-Charge.
Taking down old unserviceable gate valve/Ball Valve/Air release valve GI/PPR of size 20/25/40/50 mm bore complete.
Supply and fixing in replacement of PP-R gate valve (brass insert) for 50 mm dia pipe as per requirement of the site all as specified and directed. Make : SFMC/Prince or equivalent.
Supply and fixing in replacement of PP-R ball valve (brass insert) for 40 mm dia pipe as per requirement of the site all as specified and directed. Make : SFMC/Prince or equivalent.
Supply and fixing in replacement of PP-R ball valve (brass insert) for 25 mm dia pipe as per requirement of the site all as specified and directed. Make : SFMC/Prince or equivalent.
Supply and fixing in replacement of PP-R ball valve (brass insert) for 20 mm dia pipe as per requirement of the site all as specified and directed. Make : SFMC/Prince or equivalent.
S&F in replacement of old unserviceable water heating system/Hamam of capacity 300 Ltrs with diesel/kerosene burner of 5 inch with boiler and diesel/kerosene tank Inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulatiuon of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre which will act as heater. One direct water connection for input of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outputs of hot water from the boiler with bib taps to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stands for hamam, stand for uell tank and feul pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of old unserviceable water heating system/Hamam of capacity 500 Ltrs with diesel/kerosene burner of 5 inch with boiler and diesel/kerosene tank Inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulatiuon of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre which will act as heater. One direct water connection for input of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outputs of hot water from the boiler with bib taps to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stands for hamam, stand for uell tank and feul pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.
M&L for Disconnecting carefully the Hamam motor of any capacity and rewinding of copper winding of motor with super enamelled copper wire with existing size and gauge including varnishing, heating and testing, commissioning and reconnecting incld welding of MS part all as required to the entire satisfaction of Engineer-in-Charge and, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement Puff insulated PVC water tank of capacity 500 Ltrs including necessary connections to water supply pipe line etc, complete all as specified and as directed by Engr-in-Charge.
Supply and fixing rubber house pipe for lorry filling point incl fitting of size 50mm dia pipe complete.
Demolishing the old unsv PCC platform and M&L for construction of PCC solid block masonry platform built in CM 1:6 of size 1.2m x 1.2m and 1.5 m high alongwith rendering 15mm thick with CM 1:4 in and including excavation for foundation, PCC slab for staging, sand filling alongwith applying three coats of white wash suitable for mounting water tank of capacity 500/1000 Ltrs complete all as specified and directed by Engr-in-Charge.
Demolishing the old unsv valve chamber and M&L for construction of valve chamber of size 900mm x 900mm x 1500mm in CM 1:6, depth of the chamber to be reckoned from the top of the PCC to top of the MS cover as 1.5 Mtr including MS sheet cover fabricated from 3mm thick MS sheet and frame of angle iron 40mm x 40mm x 6mm with all fixing and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide on MS cover & frame including necessary excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distrance n.exc 50m, including 15mm thick plaster in CM 1:4 (both internally & externally) complete all as specified and directed by Engr-in-Charge.
S&F in replacement of PPR Air release valve of size 40/50 mm complete all as specified and directed by Engr-in-charge
S&F in replacement of DOL starter in sheet steel enclosure type MK-1 suitable for motor 3 phase, 415 Volts 5 HP complete all as specified and directed by Engr-in-Charge. Make : Havells/L&T/Siemens
Disconnecting electrical connection from the starter/panel for submersible pump set of 3/5 HP capacity taking up (unserviceable) pump set including motor from bore well and after repair reinstalling the same and making necessary electrical connection and lowering the pump and motor including transporting testing and commissing etc all as directed by Engineer - in - Charge. Note : Spares required for repair of submersible pump/motor work will be measured in relevant item of BOQ
Split opening the submessible pump multi stage 3 phase 3/5HP capacity and replacing the worn out shaft sleeve ,impeller.bearing, bushes, etc and M & L for machining (remetalling, grinding, etc) the shaft and turning, polishing to shaft supply and fixing suitable size gun metal bushes etc reassembling the pump completely all as directed by Engineer - in - Charge.
Split opening the submessible pump multi stage 3 phase 7.5 HP capacity and replacing the worn out shaft sleeve ,impeller.bearing, bushes, etc and M & L for machining (remetalling, grinding, etc) the shaft and turning, polishing to shaft supply and fixing suitable size gun metal bushes etc reassembling the pump completely all as directed by Engineer - in - Charge.
Supply only Borewell submersible pump 5 Hp ,(8-12) stage,discharge outlet size 50 mm, maximum discharge flow 100-500 LPM ,three phase,3000 rpm, 400V ,Suitable for 200 mm casing pipe all as directed and specified. Make- Kirloskar KS4G-5017 or equivale
Split opening the submessible motor 3/5 HP capacity and taking out worn out winding and rewinding with copper winding wire as per existing gauge including overall insulation and including replacement of defective parts intermediate sheet bottom and top thrust plate, support bush, oil seal, diaphram, 'O' ring, Key, sand guard and stud and nut complete reassembling the motor complete all as directed by Engineer - in - Charge.
Split opening the submessible motor 7.5 HP capacity and taking out worn out winding and rewinding with copper winding wire as per existing gauge including overall insulation and including replacement of defective parts intermediate sheet bottom and top thrust plate, support bush, oil seal, diaphram, 'O' ring, Key, sand guard and stud and nut complete reassembling the motor complete all as directed by Engineer - in - Charge.
Supply and fix PVC insulated submersible cable 3 core flat copper conductor (including jointing material) size 6 Sqm 1100 Volt, confirming to IS 694- 1940 complete.
Mild steel plates of grade FE-410-W (Gde-E 250 quality A) (plain or chequered) cut or notched (ordinary and counter sunk) forming holes without any attachment including taking down old one.
Deduct Schedule of Credit of Rs (-) 41780.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
national engineering
BETONG BUILDERS
EESSI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .