SPECIAL REPAIRS TO BLDG NO P-209 HAVING 08 MD QTRS TYPE-II AT MIL STN DAPPAR UNDER GE (P) DAPPAR

Amount

Schedule 'A'Section-I (SPECIAL REPAIR TO BLDG WORKS)

Total amount of Sch 'A' Sec I (SPECIAL REPAIR TO BLDG WORKS)

Schedule 'A'Section-I (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec I (INTERNAL ELECTRIFICATION WORKS)

Schedule 'A'Section-II (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed.

Applying 02 coats of interior emulsion paint (dark shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (White/Yellow shade as approved by GE) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of exterior emulsion paint (dark shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 20mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

M&L for single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light coloured tiles as approved, on vertical surfaces such as skirtings, set & jointed in neat and pointed in white or coloured cement to match, as in skirting not exc.150mm high etc. in any pattern of light or dark tiles as approved to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified.

Providing and Laying Premium (1st) quality straight edge, ceramic tiles in 300 x 300 x 7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & pointed in matching colored polymer cement based grout to match over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for anti-skid premium (1st) quality full body vitrified coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Baroda Green marble, machine cut as in shelves/steps/landings/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-2009 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf (e) Mild steel ordinary rat tail rod pattern springs incl roller and roller plate of size 150mm min length - 01 No per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 101.60 x 44.45 x 1.75 mm for chowkats or frame & shutters made of size 85.00 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) S trap for GF/P trap for FF white colour of size 520 X 360 X 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including taking down existing of any description/size and filling with PCC 1 : 7 : 12 complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified. Make : Prayag (Cat No. - 522)

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish with wooden beading & applying three coats of french polishd over one coat of primer on wooden beading etc. complete fixed in position all as specified and directed.

S&F PTMT 450mm long shelf for wash basin. Fixed in position complete in all respect all as specified. Make : Prayag (Cat No. - 191)

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. Make : Cera (Cat No. - F7020305, F7040103)

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460X203mm with bowl size 405x 354x203 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified.

S&F cast iron 4 way junction combination for 100mm bore with access door as in repair complete all as specified.

Scarping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

S&F factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mm x 22mm, machine pressed, as on roof surface, confirming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately), set jointed and pointed with grey cement slurry complete all as specified and directed.

Taking down cupboard exc 1.00 Sqm and n. exc 2.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

S&F stainless steel plate racks, glossy finish, for kitchen overall size 900mm x 600mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc all as directed.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge.

S&F Modular switch 1 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge.

S&F Modular switch 16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.

S&F Modular switch 2 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge.

S&F Modular socket 6Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.

S&F Modular socket 6/16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge.

S&F Modular Bell push 6 Amps 1 module 240 volts complete all as specified and directed by the Engr-in-charge.

S&F Modular Fan step regulator, 120 watt 2 module 240 volts and complete all as specified and directed by the Engr-in-charge.

S&F White cover plate with frame 2 module 240 volts complete all as specified and directed by the Engr-in-charge.

S&F White cover plate with frame 3 module 240 volts complete all as specified and directed by the Engr-in-charge.

S&F White cover plate with frame 4 module 240 volts and complete all as specified and directed by the Engr-in-charge.

S&F White cover plate with frame 8 module 240 volts andcomplete all as specified and directed by the Engr-in-charge.

S&F Modular Metal Box 8 module and complete all as specified and directed by the Engr-in-charge .

Supply and fixing in replacenment Modular Angle holder Cat Pat NO 33958 of Anchor Equivalent/Havells/SSK with insulated body with back plate for LED lamps all as specified and directed by the Engr-in-charge .

Supply and fixing in replacement LED lamp 9 watt, retrofit all as specified and directed by Engr-in-charge complete.

S&F in replacement LED tube light fittings 1 x 20 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.

S&F Sheet metal enclosure DB vertical TPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 415V, 4 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.

Supply and fixing in replacement MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement thermal magnetic adjustable type MCCB 63 Amps ,16 KA, 'C' series 415. V ISI marked.complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCB SPN 06-32 Amps,10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCB DP 40 Amps, 10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement mirror light fitting LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LCL-14-CDL or equivalent in Philips/Wipro complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bulk Head LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LBHE-10-CDL or equivalent in Philips/Wipro complete all as specified and directed by Engr-in-Charge.

Removing existing unserviceable Multi-meter box along with its enclosure, old wiring in between DB's/main switch/meter and S & F anti corrosive, dust proof, vermin and water proof, factory fabricated sheet metal wall mounted type Multi-meter box of size not less than 1.25m x 1.0m x 0.25m with 2mm thick CRCA sheet and including applying of two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer of colour as approved by Engr-in-Charge suitable to accommodate and comprising of following :- (a). Removing and re-fixing electric energy meter - 4 Nos. (b). Wiring with PVC insulated unsheathed ISI marked 2 runs of 6 sqmm and single run of 4.0 sqmm, as earth continuity, single core multi stranded copper conductor cable fixed to meter box with PVC tag connected in between incoming DB and electric meters etc complete all as specified and directed. (c). Space for accomodation of MCCB TPN DB 6 way - 01 No. NOTE - (a). The metering box must have 1 No. Dia. 32 mm incoming Cable entry hole with Gland provided at base and 4 Nos. Dia. 16 mm Outgoing cable entry holes with Gland. (b). The Multi-Meter Box should have 04 Nos. viewing windows made out of toughened glass of 5 mm thickness strategically placed so as to view the energy meter readings without opeing the door of the meter box and shall be fixed from inside of the cover of Multi-meter box with stainless steel frame (glass holder)with suitable rubber gasket from inside the cover, so that it can withstand weather effect. (c). The system shall be A.C. Single phase 250 V or three phase, four wires, 433 V, 50 Hz with effectively grounded neutral. (d). The box must include of accessories like hinges, clamp, handles etc. (e). Multi-Meter box shall be so constructed so as to have roof tapering down for easy flow of rain water. (f). It should have locking arrangement by way of sealing and can be opened without breaking. Locking arrangement shall be such that a Lock with Key for locking of Multi-Meter Box to be provided. (g). The door in closed position should be overlapped on base such that direct entry of screwdriver, tool or film is not possible. (h). The contractor has to furnish a detailed dimensional drawing showing clearly the dimensions and material of Multi-Meter Box and its constructional features for approval fro Engr-in-Charge prior to manufacturing the same. (j). Sign of danger shall be clearly and indelibly embossed (not printed) on the cover of the Multi-meter box.

S&F LED building security light, pressure die cast aluminum housing, 15 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 6 mtr from ground with MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge of make Crompton Greaves cat part no - LSTS-15-CDL OR Equivalent in Philips/Wipro. NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.

Supply and fix decortive wall light fixture made of polycarbonate suitable for 15W retrofit LED (Spiral B-22 base) light of 10 watt capacity of Havells Cat Part No LHDL02160099 or equivalent in Crompton all as specified and directed.

Suppy and fixing exhaust fan PVC body with louvers of size 230mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed by Engineer-in-Charge.

Swami Engineers

SONY ENTERPRISES

NAVREET CONSTRUCTION

Swami Enterprises