Loading
Loading…
Loading…
Tender Value
₹56.4 L
EMD Value
₹1.1 L
Closing Date
29 May 2026, 11:00 pmClosed
Minor Irrigation Department
DEVARAJ K SHIGGANVI
Construction of Bandhara across Binni masti Halla Sites No-1 near Kubihal village in Kundagol Taluk Dharwad District.
MI/2025-26/IW/WORK_INDENT6118/CALL-2
MI/2025-26/IW/WORK_INDENT6118/CALL-2
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Dharwad
8 documents required · 8 mandatory
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Executed in any one year the following minimum quantities of work (2020-21 to 2024-25) (Cement Concrete -453.00 cum, Earthwork - 1550 cum, steel work -8.30 tonne,)
Satisfactorily completed at least 90 Percent of the Contract value in last five years that is 2020-21 to 2024-25 as prime contractor at least one similar work such as Construction of Barrage/Bridge Cum Barrage/Bandara/Check dam/Bridge to an extent of 50% of the cost of the work Rs.28.20 Lakhs. Work Done Certificates shall be issued by the Executive Engineer
Assessed available tender capacity (AxNx2.5 - B) Where A- Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. Tender Inviting Authority N - Number of years prescribed for completion of the works for which Tenders are invited. B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 06/12 years (period of completion of the works for which Tenders are invited) Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Section 3, Qualification Information. As per K/W-3
The tenderer shall be eligible KPWD Registered contractor
Liquid assets and /or availability of credit facilities of no less than Rs.17.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.56.40 Lakhs. Financial turnover of previous years will be given a weightage of 10 percent per year to bring them to price level of FY 2025-26
₹1,410
₹1.1 L
22 May 2026
22 May 2026
1 Jun 2026
27 May 2026
Construction of Bandhara across Benni - masti Halla Site No-1 near Kubihal village in Kundagol Taluk Dharwad District.
Cutting and burning or disposing off Apu / Jondu from
marshy areas as directed with all other ancillary operations
complete with all lead and lift, as per directions of engineer in charge.
Earth work excavation for Foundation by mechanical
means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical
means for all works & depth upto 3 m, as per drawing and
technical specifications, including setting out, shoring,
strutting, barricading, caution li...
Providing casing embankment using semi-pervious /
pervious approved soil from borrow areas in layers of 250
to 300 mm ( before compaction ) including cost of all
materials, machinery, labour, all othe...
Providing and constructing 450 mm thick hand packed
rough stone revetment consisting of 300 mm thick rough
stones with 400 to 450mm long through stones at 1.5 m c /
c over a backing of 150 mm thick 40...
Providing and laying in position Cement Concrete for all Sub structures of building,
Irrigation works, Sub structure works of bridges, Drain works & other parallel works from
0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement
concrete for all Sub structures of building, Irrigation
works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 ...
Providing, fabricating and placing in position steel
reinforcement bars for RCC structures including cost of all
materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, lappi...
Providing and placing sand bags consisting of empty
cement bags filled with 35 to 40 kg locally available sand
for forming ring bund including cost of all materials,
labour, plugging joints with selec...
Filling clayey soil between two rows of sand bags placed
for forming ring bund including cost of all materials,
labour,tamping, plugging leakage points and all other
ancillary operations
complete wi...
Providing and constructing 75 mm dia PVC pipe weep
holes for concrete / masonry walls including providing 200
x 200 x 200 mm size porous concrete block made of
cement and 20 mm down coarse aggregate i...
Providing and constructing dry rubble stone pitching with
pin headers at 2 per m2 using stones and stone chips from
approved source including cost of all materials, labour,
hand packing / wedging ston...
Supply and fixing of FRP “C” section frame of size
100mm and wall thickness of 8mm Supply and fixing of
FRP “C” section frame of size 100mm and wall thickness
of 8mm (1mm) and Rib thickness of...
Supplying and fixing FRP Needle gate made out of
concealed GI tubes of suitable size & thickness. Zinc
coating of not less than 360GSM, I.S make hot rolled from
any reputed pipe manufacturing company....
Providing rubble and sand filling in layers of 250 to 300
mm including cost of all materials,machinery, labour,
watering, ramming and all other ancillary operations
with all lead and lift, as per dir...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
loc format.pdf
Others - LOC format • 0.35 MB
6118call-2 DTS KW3.doc
Tender Document • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .